This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Hydrocarbons and Particulate Matter in EGR Cooler Deposits: Effects of Gas Flow Rate, Coolant Temperature, and Oxidation Catalyst
Journal Article
2008-01-2467
ISSN: 1946-3936, e-ISSN: 1946-3944
Sector:
Topic:
Citation:
Sluder, C., Storey, J., Lewis, S., Styles, D. et al., "Hydrocarbons and Particulate Matter in EGR Cooler Deposits: Effects of Gas Flow Rate, Coolant Temperature, and Oxidation Catalyst," SAE Int. J. Engines 1(1):1196-1204, 2009, https://doi.org/10.4271/2008-01-2467.
Language:
English
References
- Dickey, D. W. Ryan, T. Matheaus, A. C. “NO x Control in Heavy-Duty Diesel Engines - What is the limit?,” SAE Paper Number 980174 Society of Automotive Engineers 1998
- Ishikawa, N. Ohkubo, Y. Kudou, K. “Study on the Effects of EGR Cooler Performance on Combustion Properties of the Pre-Mixed Compression Ignition Combustion by Multi Cylinder DI Diesel Engine,” SAE Paper 2007-01-1881 Society of Automotive Engineers 2007
- Pickett, L. M. Siebers, D. L. “Non-Sooting, Low Flame Temperature Mixing-Controlled DI Diesel Combustion,” SAE Paper Number 2004-01-1399 Society of Automotive Engineers 2004
- Idicheria, C. A. Pickett, L. M. “Soot Formation in Diesel Combustion under High-EGR Conditions,” SAE Paper Number 2005-01-3834 Society of Automotive Engineers 2005
- Sluder, C. S. Wagner, R. M. “An Estimate of Diesel High-Efficiency Clean Combustion Impacts on FTP-75 Aftertreatment Requirements,” SAE Paper Number 2006-01-3311 Society of Automotive Engineers 2006
- Lepperhoff, G. Houben, M. “Mechanisms of Deposit Formation in Internal Combustion Engines and Heat Exchangers,” SAE Paper Number 931032 Society of Automotive Engineers 1993
- Zhang, R. Charles, F. Ewing, D. Chang, J. S. Cotton, J. S. “Effect of Diesel Soot Deposition on the Performance of Exhaust Gas Recirculation Cooling Devices,” SAE Paper Number 2004-01-0122 Society of Automotive Engineers 2004
- Bravo, Y. Lazaro, J. L. Garcia-Bernad, J. “Study of Fouling Phenomena on EGR Coolers due to Soot Deposits. Development of a Representative Test Method.,” SAE Paper Number 2005-01-1143 Society of Automotive Engineers 2005
- Bravo, Y. Moreno, F. Longo, O. “Improved Characterization of Fouling in Cooled EGR Systems,” SAE Paper Number 2007-01-1257 Society of Automotive Engineers 2007
- Grillot, J. M. Icart, G. “Fouling of a Cylindrical Probe and a Finned Tube Bundle in a Diesel Exhaust Environment,” Experimental Thermal and Fluid Science 1997 14 442 454 Elsevier Science, Inc. 1997
- Ismail, B. Charles, F. Ewing, D. Cotton, J. S. Chang, J-S “Mitigation of the Diesel Soot Deposition Effect on the Exhaust Gas Recirculation (EGR) Cooling Devices for Diesel Engines,” SAE Paper Number 2005-01-0656 Society of Automotive Engineers 2005
- Ismail, B. Ewing, D. Cotton, J. S. Chang, J-S. “Characterization of the Soot Deposition Profiles in Diesel Engine Exhaust Gas Recirculation (EGR) Cooling Devices using a Digital Neutron Radiography Imaging Technique,” SAE Paper Number 2004-01-1433 Society of Automotive Engineers 2004
- Charles, F. Ewing, D. Becard, J. Chang, J-S. Cotton, J. S. “Optimization of the Exhaust Mass Flow Rate and Coolant Temperature for Exhaust Gas Recirculation (EGR) Cooling Devices Used in Diesel Engines,” SAE Paper Number 2005-01-0654 Society of Automotive Engineers 2005
- Usui, S. Ito, K. Kato, K. “The Effect of Semi-Circular Micro Riblets on the Deposition of Diesel Exhaust Particulate,” SAE Paper Number 2004-01-0969 Society of Automotive Engineers 2004
- Castano, C. Sanchez, A. Grande, J. A. Paz, C. “Advantages in the EGR Cooler Performance by Using Internal Corrugated Tubes Technology,” SAE Paper Number 2007-26-019 Society of Automotive Engineers 2007
- CRC Handbook of Chemistry and Physics 88th CRC Press / Taylor and Francis Boca Raton, Florida 2008
- Duce, R. A. Gagosian, R. B. “The Input of Atmospheric n-C10 to n-C30 Alkanes to the Ocean,” Journal of Geophysical Research 87 227 231 American Geophysical Union 1982