This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Lumped Parameters Numerical Simulation of a Variable Displacement Vane Pump for High Speed ICE Lubrication
Technical Paper
2008-01-2445
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
In this paper a detailed analysis focused on lumped parameters numerical modeling of a variable displacement vane pump for high speed internal combustion engine lubrication is presented and discussed. This particular volumetric unit is characterized by very extreme performance, both in terms of rotational speed, delivery pressure and displacement variation.
First of all, a comprehensive description of the simulation environment properly tailored for the numerical modeling of the vane pump operation is introduced and all its geometric, kinematic and fluid-dynamic characteristics are described in depth. Then, the results coming from an exhaustive experimental campaign have been compared with simulations, finding a general good accordance that demonstrates the reliability of this numerical approach. Finally, the capabilities of the validated model have been applied to investigate the influence exerted by the main geometrical parameters and internal leakages on the pump fluid dynamic behavior.
Recommended Content
Authors
Citation
Cantore, G., Paltrinieri, F., Tosetti, F., and Milani, M., "Lumped Parameters Numerical Simulation of a Variable Displacement Vane Pump for High Speed ICE Lubrication," SAE Technical Paper 2008-01-2445, 2008, https://doi.org/10.4271/2008-01-2445.Also In
References
- Fabiani, M. Mancò, S. Nervegna, N. Rundo, M. “Modelling and Simulation of Gerotor Gearing in Lubricating Oil Pumps” SAE Paper 1999-01-0626 1999 SAE International Congress and Exposition Detroit March 1-4 1999 SAE Transactions, Journal of Engines 1999
- Mancò, S. Nervegna, N. Rundo, M. “A Contribution to the Design of Hydraulic Lube Pumps” The International Journal of Fluid Power 3 1 1439 9776 21 31 April 2002
- Mancò, S. Nervegna, N. Rundo, M. Armenio, G. “Modelling and Simulation of Variable Displacement Vane Pumps for IC Engine Lubrication” SAE Paper 2004-01-1601 2004
- Mancò, S. Nervegna, N. Rundo, M. Armenio, G. “Displacement Versus Flow Control in IC Engines Lubricating Pumps” SAE Paper 2004-01-1602 2004
- Rundo, M. Nervegna, N. “Geometry Assessment of Variable Displacement Vane Pumps” ASME Journal of Dynamic Systems, Measurement, and Control July 2007 129 4 446 455
- Haworth, D.C. Maguire, J.M. Matthes, W.R. Rhein, R. El Tahry, S.H. “Dynamic Fluid Flow Analysis of Oil Pumps” SAE Paper 960422 1996
- Jiang, Y. Perng, C.Y. “An Efficient 3D Transient Computational Model for Vane Oil Pump and Gerotor Oil Pump Simulators” SAE Paper 970841 1997
- Hattori, K. Suzuki, H. Hasegawa, J. “Design Method of Small-Ripple Vane Pump” SAE Paper 871681 1987
- Jones, B. L. Johnston, D. N. Longmore, D. K. “Simulation of Suction Flow Ripple in Power Steering Pumps” SAE Paper 982023 1998
- Singh, T. “Design of Vane Pump Suction Porting to Reduce Cavitation at High Operating Speeds” SAE Paper 911937 1991
- Mochizuki, T. “Development of the Variable Displacement Vane Pump for the Automotive Power Steering System” SAE Paper 930261 1993
- Dickinson, A.L. Edge, K.A. Johnston, D.N. “Measurement and Prediction of Power Steering Vane Pump Fluidborne Noise” SAE Paper 931294 1993
- Van der Sluis, F. “A New Pump for CVT Applications” SAE Paper 2003-01-3207 2003
- Nishiyama, H. Murota, K. Hirotsu, S. Amano, K. Isoyama, E. “Vane Pump for New Generation CVT” SAE Paper 2007-01-1456 2007
- Staley, D. Pryor, B. Gilgenbach, K. “Adaptation of a Variable Displacement Vane Pump to Engine Lube Oil Applications” SAE Paper 2007-01-1567 2007
- AMESim ® Version 4.2 User Manual September 2004 IMAGINE S.A. 1995 2004
- Bianchini, A. Ferrara, G. Ferrari, L. Milani, M. Paltrinieri, F. Tosetti, F. “Design and Optimization of a Variable Displacement Vane Pump for High Performance IC Engine Lubrication. Part 1 - Experimental analysis of the circumferential pressure distribution with dynamic pressure sensors” SAE Paper 09PFL-0308, tentatively accepted for the SAE 2009 World Congress & Exhibition April 20 23 2009 Cobo Center Detroit, Michigan, USA
- Milani, M. Paltrinieri, F. Tosetti, F. Bianchini, A. Ferrara, G. Ferrari, L. “Design and Optimization of a Variable Displacement Vane Pump for High Performance IC Engine Lubrication. Part 2 - Lumped parameters numerical analysis” SAE Paper 09PFL-0302, tentatively accepted for the SAE 2009 World Congress & Exhibition April 20 23 2009 Cobo Center Detroit, Michigan, USA