This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Lightweight, Flexible, and Freezable Heat Pump/Radiator for EVA Suits
Technical Paper
2008-01-2112
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
We have completed preliminary tests that show the feasibility of an innovative concept for a spacesuit thermal control system using a lightweight, flexible heat pump/radiator. The heat pump/radiator is part of a regenerable LiCI/water absorption cooling device that absorbs an astronaut's metabolic heat and rejects it to the environment via thermal radiation at a relatively high temperature. We identified key design specifications for the system, demonstrated that it is feasible to fabricate the flexible radiator, measured the heat rejection capability of the radiator, and assessed the effects on overall mass of the PLSS. We specified system design features that will enable the flexible absorber/radiator to operate in a wide range of space exploration environments. The materials used to fabricate the flexible absorber/radiator samples were all found to be low off-gassing and many have already been qualified for use in space. Fabrication samples demonstrated hermetic seals and excellent structural strength, holding internal pressures greater than 35 kPa (5 psi) with no deformation or damage. A 55 W-hr proof-of-concept absorber successfully demonstrated thermal regeneration and provided refrigeration at a temperature of 19°C while rejecting heat at a temperature of 50°C. This technology promises to enable a non-venting, freeze-tolerant, lightweight radiating system for EVA suits on future space exploration missions.
Authors
Citation
Izenson, M., Chen, W., and Trevino, L., "Lightweight, Flexible, and Freezable Heat Pump/Radiator for EVA Suits," SAE Technical Paper 2008-01-2112, 2008, https://doi.org/10.4271/2008-01-2112.Also In
References
- American Society of Heating, Refrigeration, and Air Conditioning Engineers 1997 ASHRAE Handbook: Fundamentals Atlanta, GA 1997
- Clark, C. S. “A Methodology for Calculation of EVA Suit Heat Leak,” Lockheed Martin, NAS9-17900, LESC-27794, CTSD-0491 Nov 30 1989
- “Constellation Program Human-Systems Integration Requirements,” NASA CxP 70024 Baseline Dec. 16 2006
- Hodgson, E. W. Jr. “A Chameleon Suit to Liberate Human Exploration of Space Environments,” Hamilton Sundstrand Space Systems International, Final Report for NASA Contract No. 07600-067 December 2001
- Izenson, M. Chen, W. “Flexible Laminated Heat and Mass Exchangers,” May 2 2007
- Izenson, M. Chen, W. Trevino, L. “Zero-Venting, Regenerable, Lightweight Heat Rejection for EVA Suits,” 35 th International Conference on Environmental Systems and 8 th European Symposium on Space Environmental Control Systems Rome, Italy July 2005
- Lovine, J. V. Horton, R. D. “Preliminary Design Review (PDR)-Advanced Technology Spacesuit Thermal Module, Thermal System Analysis,” September 1999
- Thomas, G. A. “Packaging Factors for Portable Life Support Subsystems Based on Apollo and Shuttle Systems,” 23 rd International Conference on Environmental Systems Colorado Springs, Colorado July 1993
- Trevino, L. “Advanced Technology Spacesuit Thermal Module, Radiator Description,” September 1999