This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
The Impact of E85 Use on Lubricant Performance
Technical Paper
2008-01-1763
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Ethanol is widely used as a gasoline component to provide a prescribed amount of oxygenates and for its perceived advantages of less dependence on petroleum based products and lowering overall CO2 emissions. In most cases the level of ethanol in gasoline does not exceed 10%. In some parts of the Unites States, E85 fuel consisting of 85% ethanol and 15% gasoline is commonly available. Many US vehicles sold today are specially adapted for use of both gasoline and high ethanol fuels; so-called Flexible Fuel Vehicles (FFV). While high ethanol fuels are currently a small percentage of the overall gasoline pool, they provide an interesting opportunity to study the effects that ethanol use in gasoline may have on lubricant related performance.
Based on past industry experience with methanol based fuel, theoretical areas of concern for ethanol based fuels are valve train rust and potential problems associated with high amounts of water in the lubricant. The authors have studied the lubricant related effects of E85 use in well controlled field testing under cold climate conditions. It is concluded that the use of E85 fuel leads to significantly higher water levels in the lubricant as compared to the use of gasoline. The use of E85 does not promote the formation of valve train rust in FFV engines run on modern lubricants.
Recommended Content
Authors
Citation
Boons, M., Van Den Bulk, R., and King, T., "The Impact of E85 Use on Lubricant Performance," SAE Technical Paper 2008-01-1763, 2008, https://doi.org/10.4271/2008-01-1763.Also In
References
- Parsons, G.M. “Impact of Biodiesel Use on the Lubrication of Diesel Engines” 13th Asia F&L Conf. Mar 7-9 Bangkok, Thailand 2007
- Giroldo Mauro Berti Makant William Werninghaus Edward Coelho Eugenio P. D. “Development of 1.6L Flex Fuel Engine for Brazilian Market” SAE 2005-01-4130
- Taniguchi Satoshi Yoshida Kaori Tsukasaki Yukihiro “Feasibility Study of Ethanol Applications to A Direct Injection Gasoline Engine” SAE 2007-01-2037 , JSAE Technical Paper No. 20077079
- Fraidl Guenter K. Kapus Paul E. Fuerhapter Alois Fuchs H. “Ethanol Direct Injection on Turbocharged SI Engines∼Potential and Challenges” SAE 2007-01-1408
- Wicker Ryan B. Villa Guillermo Jasso Fernando Medina Frank “Practical considerations for an E85- fueled vehicle conversion” SAE 1999-01-3517
- Tsunooka Takashi Hosokawa Yohei Utsumi Shintaro Kawai Takashi Sonoda Yukihiro “High Concentration Ethanol Effect on SI Engine Cold Start ability” SAE 2007-01-2036 , JSAE Technical Paper No. 20077075
- Cracknell Roger Stark Moray “Influence of Fuel Properties on Lubricant Oxidative Stability: Part 2∼Chemical Kinetics Modeling” SAE 2007-01-0003
- SAE/CRC Methodology for Rating Engine Parts
- “Engine Rust Rating Manual No.7”
- “Engine Sludge Rating Manual No.12”
- “Engine Varnish Rating Manual No.14”
- “Engine Carbon Rating Manual No.15”
- Turner J. W. G. Pearson R. J. Holland B. Peck R. “Alcohol-Based Fuels in High-Performance Engines’ SAE 2007-01-0056
- Sharma Sunil S. Engle James J. Olson Jon S. “A Comparison of the Effect of E85 Versus Gasoline on Exhaust System Surface Temperatures”
- Graves Ronald West Brian Storey John Lopez Alberto Theiss Timothy Lewis Sam “Fuel Economy and Emissions of the Ethanol-Optimized Saab 9-5 Biopower” SAE 2007-01-3994
- Schramm Jesper “Application of a Biodegradable Lubricant in Two Flexible Fuel Vehicles” SAE 2004-01-2988
- Pana C. Negurescu N. Popa M. G. Cernat Al. Soare D. “Aspects of the Use of Ethanol in Spark Ignition Engine” SAE 2007-01-2040