This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Optimization of the In-Air Cylinders Filling for Emissions Reduction in Diesel Engines
Technical Paper
2008-01-1732
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Modern diesel engines are typically equipped with common rail injection system, variable geometry turbocharger and exhaust gas recirculation system in order to meet the emissions standards. While the electronic fuel control has been extensively developed and used in the common rail injection systems, the “in-air cylinders filling” control remains poorly exploited. In this paper, we suggest a dynamic engine optimization process that predicts, under transient conditions, the optimal values of the intake pressure and the compressor mass flow rate to be applied to the engine based on pollution criteria such as the opacity. The optimization procedure and a physical mean value model describing the functioning of a variable geometry turbocharged diesel engine and its smoke's opacity are shown in details. The simulations results of the engine's model are in excellent agreement with the experimental data collected on test bench. The optimization results are compared to the engine's simulations using fixed geometry turbocharger, they show enormous gain in opacity reduction which reflects the importance of the air supply system control.
Recommended Content
Technical Paper | Compact and Accurate Turbocharger Modelling for Engine Control |
Technical Paper | Turbocharger Modeling for Automotive Control Applications |
Technical Paper | Mean Value Modeling of a Small Turbocharged Diesel Engine |
Authors
Topic
Citation
Omran, R., Younes, R., and Champoussin, J., "Optimization of the In-Air Cylinders Filling for Emissions Reduction in Diesel Engines," SAE Technical Paper 2008-01-1732, 2008, https://doi.org/10.4271/2008-01-1732.Also In
References
- Filipi Z. Wang Y. Assanis D. “Effect of variable geometry (VGT) on Diesel engine and vehicle system transient response” SAE paper 2001-01-1247 2001
- Stefanopolou A. Kolmanovsky I. “Evaluation of turbocharger power assist system using optimal control techniques” SAE paper 2000-01-0519 2000
- Saulnier S. Soltani S. “Computational Study of Diesel Engine Downsizing Using Two-Stage Turbo charging” SAE paper 2004-01-0929 2004
- Dixon J. George S.C. “Optimal Boost Control for An Electrical Supercharging Application” SAE paper 2004-01-0523 2004
- Younes R. “Elaboration d'un modèle de connaissance du moteur diesel avec turbocompresseur à géométrie variable en vue de l'optimisation de ses émissions” Ecole Centrale de Lyon France 1993
- Kao M. Moskwa J.J. “Turbocharged Diesel Engine Modeling for Nonlinear Engine Control and State Estimation” ASME Journal of Dynamic Systems, Measurement, and Control 117 20 30 March 1995
- Dovifaaz X. “Modélisation et commande de moteur Diesel en vue de la réduction de ses émissions” UPJV Amiens, France 2001
- Ouenou-Gamo S. “Modélisation d'un moteur Diesel suralimenté” UPJV Amiens, France 2001
- Ouladsine M. Bloch G. Dovifaaz X. “Neural Modelling and Control of a Diesel Engine with Pollution Constraints” Journal of Intelligent and Robotic Systems; Theory and Application 2004
- Mooral P. Kolmanovsky I. “Turbocharger modeling for automotive control applications” SAE paper, 1999-01-0908 1999
- Minoux M. “Programmation mathématique: Théorie et Algorithmes” France 1983