This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Characteristics of Ethanol, Butanol, Iso-Octane and Gasoline Sprays and Combustion from a Multi-Hole Injector in a DISI Engine

Journal Article
ISSN: 1946-3952, e-ISSN: 1946-3960
Published June 23, 2008 by SAE International in United States
Characteristics of Ethanol, Butanol, Iso-Octane and Gasoline Sprays and Combustion from a Multi-Hole Injector in a DISI Engine
Citation: Serras-Pereira, J., Aleiferis, P., Richardson, D., and Wallace, S., "Characteristics of Ethanol, Butanol, Iso-Octane and Gasoline Sprays and Combustion from a Multi-Hole Injector in a DISI Engine," SAE Int. J. Fuels Lubr. 1(1):893-909, 2009,
Language: English


  1. “Key Facts about: Climate Change, Carbon Dioxide Emissions by End User: 1970-2005” 2007
  2. Kleeberg, H. Monnier, G. “Downsizing a Gasoline Engine Using Turbocharging with Direct Injection” SAE Paper 2003-01-0542 2003
  3. Bandel, W. Fraidl, G.K. Kapus, P.E. Sikinger, H. Cowland, C.N. “The Turbocharged GDI Engine: Boosted Synergies for High Fuel Economy Plus Ultra-Low Emissions” SAE Paper 2006-01-1266 2006
  4. Kapus, P.E. Fuerhapter Fuchs, H. Fraidl, G.K. “Ethanol Direct Injection on Turbocharged SI Engines - Potentials and Challenges” SAE Paper 2007-01-1408 2007
  5. Brewster, S. “Initial Development of a Turbo-Charged Direct Injection E100 Combustion System” SAE Paper 2007-01-3625 2007
  6. Nakata, K. Utsumi, S. Ota, A. Kawatake, K. Kawai, T. Tsunooka, T. “The Effect of Ethanol on a Spark Ignition Engine” SAE Paper 2006-01-3380 2006
  7. Farell, J.T. Weissman, W. Johnston, R.J. Nishimura, J. Ueda, T. Iwashita, Y. “Fuel Effects on SIDI Efficiency and Emissions” SAE Paper 2003-01-3186 2003
  8. Takashi, H. Kimitoshi, T. “Laminar Flame Speeds of Ethanol, n-heptane, Iso -Octane Air Mixtures” FISITA 2006 Yokohama, Japan Paper SC40
  9. Gülder, Ö.L. “Burning Velocities of Ethanol- Iso -Octane Blends” Combustion and Flame 56 261 168 1984
  10. Gülder, Ö.L. “Correlations of Laminar Combustion Data for Alternative SI Engine Fuels” SAE Paper 841000 1984
  11. Serras-Pereira, J. Aleiferis, P.G. Richardson, D. Wallace, S. “Mixture Preparation and Combustion Variability in a Spray-Guided DISI Engine” SAE Paper 2007-01-4033 2007
  12. Serras-Pereira, J. Aleiferis, P.G. Richardson, D. Wallace, S. “Spray Development, Flow Interactions and Wall Impingement in a Direct-Injection Spark-Ignition Engine” SAE Paper 2007-01-2712 2007
  13. Schwarzenbch, R.E. Gschwend, P.M. Imboden, D.M. “Environmental Organic Chemistry” John Wiley and Sons 1993
  14. Kaye, G.W.C. Laby, T.H. “Tables of Physical and Chemical Constants” 16th Longman 1995
  15. Adamson, A.W. Gast, A.P. “Physical Chemistry of Surfaces” 6th John Wiley and Sons 1997
  16. Lide, D.R. “CRC Handbook of Chemistry and Physics” 74th CRC Press 1994
  17. Aleiferis, P.G. van Romunde, Z. “Effect of Operating Conditions and Fuel Volatility on Development and Variability of Sprays from Gasoline Direct Injection Multi-Hole Injectors” Atomization and Sprays 2007
  18. van Romunde, Z. Aleiferis, P.G. Cracknell, R.F. Walmsley, H.L. “Effect of Fuel Properties on Spray Development from a Multi-Hole DISI Engine Injector” SAE Paper 2007-01-4032 2007
  19. Skogsberg, M. Dahlander, P Lindegren, R. Denbratt, I. “Effects of Injector Parameters on Mixture Formation for Multi-Hole Nozzles in a Spray-Guided Gasoline DI Engine” SAE Paper 2005-01-0097 2005
  20. Nauwerck, A. Pfeil, J. Velji, A. Spicher, U. Richter, B. “A Basic Experimental Study of Gasoline Direct Injection at Significantly High Injection Pressures” SAE Paper 2005-01-0098 2005
  21. Beyrau, F. Weikl, M.C. Schmitz, I. Seeger, T. Leipertz, A. “Locally Resolved Investigation of the Vaporization of GDI Sprays Applying Different Laser Techniques” Atomization and Sprays 16 319 330 2006
  22. Aleiferis, P.G. Serras-Pereira, J. van Romunde, Z. Richardson, D. Wallace, S. Cracknell, R.F. Walmsley, H.L. “Optical Studies of Spray Development in a Quiescent Chamber and in a Direct-Injection Spark-Ignition Engine” International Conference on Internal Combustion Engines: Performance, Fuel Economy and Emissions 3 13 IMechE London December 11-12 2007
  23. Aleiferis, P.G. Malcolm, J.S. Todd, A.R. Cairns, A. Hoffmann, H. “An Optical Study of Spray Development and Combustion of Ethanol, Iso-Octane and Gasoline Blends in a DISI Engine” SAE Paper 2008-01-0073 2008
  24. Lefebvre, A.H. “Atomization and Sprays” Taylor and Francis 1989
  25. Gilles-Birth, I. Rechs, M. Spicher, U. Bernhardt, S. “Experimental Investigation of the In-Nozzle Flow of Valve Covered Orifice Nozzles for Gasoline Direct Injection” Proceeding of the 7 th International Symposium on Internal Combustion Diagnostics 59 78 AVL Baden-Baden, Germany May 18-19 2006
  26. Papoulias, D. Giannadakis, E. Mitroglou, N. Gavaises, M. Theodorakakos, A. “Cavitation in Fuel Injection Systems for Spray-Guided Direct Injection Gasoline Systems” SAE Paper 2007-01-1418 2007
  27. Aleiferis, P.G. Hardalupas, Y. Kolokotronis, D. Taylor, A.M.K.P. Arioka, A. Saito, M. “Experimental Investigation of the Internal Flow Field of a Model Gasoline Injector Using Micro-Particle Image Velocimetry” SAE Paper 2006-01-3374 2006
  28. Naber, J. Reitz, R. “Modeling Engine Spray/Wall Impingement” SAE Paper 880107 1988
  29. Shih, L. Assanis, D. “Implementation of a Fuel Spray Wall Interaction Model in KIVA -II” SAE Paper 911787 1991
  30. Jarvis, S. Justham, T. Clarke, A. Garner, C.P. Hargrave, G.K. Richardson, D. “Motored SI IC Engine In-Cylinder Flow Field Measurement Using time Resolved Digital PIV for Characterisation of Cyclic Variation” SAE Paper 2006-01-1044 2006
  31. Justham, T. “Cyclic Variability of Engine Intake and In-Cylinder Flows” Loughborough University, Wolfson School of Mechanical and Manufacturing Engineering UK 2007

Cited By