This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Experimental Frequency Analysis of Tapered Thin Walled Beams of Open Section Resting on Continuous Elastic Foundation
Technical Paper
2008-01-1373
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
High strength combined with minimum weight is a distinctive feature of thin-walled beams of open cross-section. A high degree of material economy can be achieved by using non-uniform members of this type. This is the salient feature of thin-walled structural members of open sections such as H, Z, T channel and angle sections. Tapered thin-walled members of open sections are frequently employed for their structural efficiency. In the present analysis torsional behaviour of steel tapered cantilever beam subjected to time-invariant axial compressive load is investigated. To infer its torsional behaviour, secondary effects such as rotary inertia and effect of warping have been taken into consideration. In this work frequency analysis of thin-walled tapered I-sections is carried out to obtain the natural frequencies and corresponding mode shapes.
The numerical solutions are obtained from finite element method. The values of natural frequencies are obtained for the first five modes from the frequency analysis of the tapered cantilever beam subjected to a time-invariant axial compressive load for various combinations of the parameters. The results are compared with an experimental analysis.
Topic
Citation
Satyanarayana, M. and Dukkipati, R., "Experimental Frequency Analysis of Tapered Thin Walled Beams of Open Section Resting on Continuous Elastic Foundation," SAE Technical Paper 2008-01-1373, 2008, https://doi.org/10.4271/2008-01-1373.Also In
Reliability and Robust Design in Automotive Engineering, 2008
Number: SP-2170; Published: 2008-04-14
Number: SP-2170; Published: 2008-04-14
References
- Wagner H. “Torsion and buckling of open sections” N.A.C.A. Tech Memo 807 1929
- Kappus R. “Twisting failure of centrally loaded open-section columns in the elastic range” N.A.C.A. Tech. Memo No.851 1938
- Timoshenko S.P. “Theory of bending, torsion and buckling of thin-walled beams of open section” J. Franklin Inst 239 215 129 249 245 1945
- Bleich F. “Buckling strength of metal structures” McGraw Hill New York 1952
- Gere J.M. “Torsional vibrations of beams of thin-walled open section” Journal of Applied Mechanics Trans. ASME 21 381 387 1954
- Kenney J.J. “Study state vibrations of beam on elastic foundation for moving loads” Journal of Applied Mechanics Trans. ASME 21 359 1954
- Crandall S.H. “The Timshenko beam on an elastic foundation” Proc. Fo the third Mid-Western, Conference Solid Mechanics Ann Arbor Michigan 1957
- Euler L. “De curves elastics” Memories Del' Acade' mie De, Berlin 1959
- Teseitlin A.I. “On the effect of shear deformation and rotary inertia in vibrations of beams on elastic foundation” Journal of Mathematics and Mechanics 25 2 1965
- Rao J.S. “Fundamental torsional vibration of a cantilever beam of triangular cross-section with uniform taper” Proc. Of 10 th Congress of ISTAM 66 1964
- Aggerwal H.R. Cramch E.T. “A theory of torsional and coupled bending, torsional waves in thin-walled open section beams” J. Applied Mech., Trans., ASME 34 337 343 1967
- Lee G.C. Szabo B.A. “Torsional response of tapered I-girders” Journal of Structural Division, Trans. ASCE 93 232 252 1967
- Lee L.H.N. “Non-uniform torsion of tapered I-beams” Journal of the Franklin Institute 262 37 44 1968
- Wilde P. “The torsion of thin-walled bars of with variable cross-sections” Archiwulu Mechaniki Stosowaneej 4 20 431 1968
- Li D.B. Chui Y.H. Smith I. “Effect of warping on torsional vibration of members with open cross-sections” Journal of Sound and Vibration 170 270 1994
- Wang Q.F. “Spline finite member element method for vibration of thin-walled members with shear leg” Journal of Sound and Vibrations 206 339 352 1997
- Librescu L. Na S.S. “Vibration and dynamic response control of cantilevers carrying externally mounted stores” Journal of the Acoustical Society of America, Vol 102 3516 3522 1997
- Ren Wei-Xin Zeng Qing-Yuan “Interactive buckling behaviour and ultimate load of I-section steel columns” Journal of Structural Engineering 123 9 1210 1217 1997
- Song O. Librescu L. “Anisotropy and structural coupling on vibration and instability of spinning thin-walled beams” Journal of Sound and Vibration 204 477 494 1997
- Allemeng R.J. Brown D.L. “Multiple input experimental model analysis - A survey” Internal Journal of Analytical and Experimental Model Analysis, 37 44 1986
- Kammer D.C. “Test-analysis model development using an exact modal reduction” IJAEMA 2(4) 174 179 1987
- Gaught T.M. Dobson B.J. 1986 “The transient analysis of a structures using a model” IJAEMA 1(1) 11 16
- Huo Q.Z. Zhang D.J. “Application of impact testing in the model analysis of a large structure” IJAEMA 3(2) 57 61 1988
- Ewins D.J. Vakakis A.F. “An alternative method of SDOF model analysis” IJAEMA 4(4) 144 149 1989