Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

On-Road Evaluation of a PEMS for Measuring Gaseous In-Use Emissions from a Heavy-Duty Diesel Vehicle

Journal Article
2008-01-1300
ISSN: 1946-391X, e-ISSN: 1946-3928
DOI: https://doi.org/10.4271/2008-01-1300
Published April 14, 2008 by SAE International in United States
On-Road Evaluation of a PEMS for Measuring Gaseous In-Use Emissions from a Heavy-Duty Diesel Vehicle
Sector:
Citation: Johnson, K., Durbin, T., Cocker, D., Miller, J. et al., "On-Road Evaluation of a PEMS for Measuring Gaseous In-Use Emissions from a Heavy-Duty Diesel Vehicle," SAE Int. J. Commer. Veh. 1(1):200-209, 2009, https://doi.org/10.4271/2008-01-1300.
Language: English

References

  1. Code of Federal Regulations Office of the Federal Register National Archives and Records Administration Washington, DC July 2005
  2. Gautam, M. Clark, N.N. Thompson, G.J. Carder, D.K. Lyons, D.W. 2000 Evaluation of Mobile Monitoring Technologies for Heavy-Duty Diesel Powered Vehicle Emissions Phase 1 report submitted to the Settling Heavy-Duty Diesel Engine West Virginia University March
  3. Gautam, M. Clark, N.N. Thompson, G.J. Carder, D.K. Lyons, D.W. 2000 Development of In Use Testing Procedures for Heavy-Duty Diesel Powered Vehicle Emissions Phase II report submitted to the Settling Heavy-Duty Diesel Engine West Virginia University March
  4. Gautam, M. Clark, N.N. Thompson, G.J. Carder, D.K. Lyons, D.W. 2002 Evaluation of In-Use Heavy-Duty Vehicle Emissions Using the Mobile Emissions Measurement System (MEMS) Phase III report submitted to the Settling Heavy-Duty Diesel Engine West Virginia University December
  5. Kreso, A. Ensfield, C. 2003 Performance of In Use Equipment During Transcontinental Excursion and Use of the Real-World Data to Calibrate Vehicle to Ensure Compliance with Emissions Standards Proceedings of the 13 th CRC On-Road Vehicle Emissions Workshop San Diego, CA March
  6. Akard, M. Nakamura, H. Aoki, S. Kihara, N. Adachi, M. 2005 Performance Results and Design Consideration for a New In-Use Testing Instrument SAE 2005-01-3606 Society of Automotive Engineers Warrendale, PA
  7. Weaver, C.S. Balam-Almanza, M.V. 2001 Development of the ‘RAVEM’ Ride-Along Vehicle Emission Measurement System for Gaseous and Particulate Emissions SAE 2001-01-3644 Society of Automotive Engineers Warrendale, PA
  8. Vohtisek,-Lom, M. Allsop, J.E. 2001 Development of Heavy-Duty Diesel Portable On-Board Mass Exhaust Emissions Monitoring System with NO x , CO 2 , and Qualitative PM Capabilities SAE 2001-01-3641 Society of Automotive Engineers Warrendale, PA
  9. Shahinian, Vahan D. “On-Vehicle Emission Analyzer Semtech-DS User Manual,” Sensors Inc. Saline, MI 2007
  10. Cocker, D.R. III Shah, S.D. Johnson, K. Miller, J.W. Norbeck, J.M. 2004 “Development and Application of a Mobile Laboratory for Measuring Emissions from Diesel Engines. 1. Regulated Gaseous Emissions” Environ. Sci. Technol. 38 2182 2189
  11. Miller, J.W. Johnson, K. Durbin, T.D. Cocker, D.R. III 2007 “Measurement Allowance Project On-Road Validation” Draft Final Report for the California Air Resource Board December http://www.arb.ca.gov/research/
  12. Miller, J.W. Durbin, T.D. Johnson, K. Cocker, D.R. III 2006 “Evaluation of Portable Emissions Measurement Systems (PEMS) for Inventory Purposes and the Not-To-Exceed Heavy-Duty Diesel Engine Regulation” Final Report for the California Air Resource Board July http://www.arb.ca.gov/research/abstracts/03-345.htm
  13. Durbin T.D. Johnson K.C. Cocker D.R. Miller J.W. 2007 Evaluation and Comparison of Portable Emissions Measurement Systems and Federal Reference Methods for Emissions from a Back-Up Generator and a Diesel Truck Operated on a Chassis Dynamometer Environ. Sci. Technol. 41 6199 6204
  14. Fiest, M.D. Sharp, C.A. Mason, R.L. Buckingham, J.P. 2007 Determination of PEMS Measurement Allowance for Gaseous Emissions Regulated Under the Heavy-Duty Diesel Engine In-Use Testing Program Southwest Research Institute San Antonio, TX April
  15. Gautam, M. Carder, D. Thompson, G. McConnell Shade, B. 2007 Year-Long Evaluation of Portable Emissions Measurement Systems for Heavy-Duty Diesel Engines 17 th CRC On-Road Vehicle Emissions Workshop San Diego, CA March
  16. Dearth, M.A. Butler, J.W. Colvin, A. Gierczak, C. Kaberline, S. Korniski, T. 2005 SemtechD: The Chassis Roll Evaluation of a Commercial Portable Emission Measurement System (PEMS) SAE 2005-01-0673 Society of Automotive Engineers Warrendale, PA
  17. Clark, N. Gregory, J. Thompson Gautam, M. Lyons, D. 2002 Inference of Torque and Power From Heavy-Duty Diesel Engines for On-Road Emissions Monitoring SAE 2001-01-0614 Society of Automotive Engineers Warrendale, PA

Cited By

Recommended Content

Technical Paper Uncertainties in Measurements of Emissions in Chassis Dynamometer Tests
Technical Paper A Predictive Real Time NOx Model for Conventional and Partially Premixed Diesel Combustion
Aerospace Standard Procedure for the Analysis and Evaluation of Gaseous Emissions from Aircraft Engines