Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Advanced Mathematical Modeling of Electronic Unit-Injector Systems for Heavy Duty Diesel Engine Application

Journal Article
2008-01-1195
ISSN: 1946-391X, e-ISSN: 1946-3928
DOI: https://doi.org/10.4271/2008-01-1195
Published April 14, 2008 by SAE International in United States
Advanced Mathematical Modeling of Electronic Unit-Injector Systems for Heavy Duty Diesel Engine Application
Sector:
Citation: Catania, A. and Ferrari, A., "Advanced Mathematical Modeling of Electronic Unit-Injector Systems for Heavy Duty Diesel Engine Application," SAE Int. J. Commer. Veh. 1(1):134-151, 2009, https://doi.org/10.4271/2008-01-1195.
Language: English

References

  1. El-Hannouny, E. M. Lee, T. W. Farrell, P. V. Reitz D. 2003 “An Experimental and Numerical Study of Injector Behavior for HDSI Diesel Engines” SAE Paper No. 2003-01-0705
  2. SAE 1997 “Future Diesel Engines” SP-1287
  3. Herzog, P. Burlger, L. Winklhofer, E. Zelenka, P. Cartellieri, W. 1992 “NO Reduction Strategies for DI Diesel Engines” SAE Paper No. 920470
  4. Hiroyasu, H. Arai, M. 1990 “Structure of Fuel Sprays in Diesel Engines” SAE Paper No. 900475
  5. Tullis, S. Greeves, G. 1999 “HSDI Emission Reduction with Common Rail Fuel Injection Systems” I. Mech. E., S492/S18/99
  6. Glassey, S. F. Stockner, A. R. Flinn, M. A. 1993 “HEUI- A New Direction for Diesel Engine Fuel Systems” SAE Paper No. 930270
  7. Chaufour, P. Millet, G. Hedna, M. Neyrat, S. Botelle, E. 2004 “Advanced Modeling of a Heavy Truck Unit-Injector System and Its Applications in the Engine Design Process” SAE Paper No. 2004-01-0020
  8. Gibson, D. H. Shinogle, R.D. Moncelle, M. E. 1996 “Meeting the Customer's Needs - Defining the Next Generation Electronically Controlled Unit Injector Concept for Heavy Duty Diesel Engines” SAE Paper No. 961285
  9. Bosch R. GmbH 2006 “Diesel-Engine Management” Bosch Technical Books SAE International
  10. Schweimer, G. W. Bader, T. “EUI for Passenger Car DI-Diesel Engines” SAE Paper No. 920628
  11. Catania, A. E. Ferrari, A. Spessa, E. 2006 “Numerical-Experimental Study and Solutions to Reduce the Dwell Time Threshold for Fusion-Free Consecutive Injections in a Multijet Solenoid-Type C.R. System” ASME Paper ICES2006-1369. ASME AWARD for best ICED paper 2006, ASME Transactions, Journal of Engineering for Gas Turbines and Power
  12. Stockner, A.R. Flinn, M. A. Camplin, F.A. 1993 “Development of the HEUI Fuel System Integration of Design, Simulation, Test and Manufacturing” SAE Paper No. 930271
  13. Mulemane, A. Han, J. S. Lu, P. H. Yoon, S. J. Lai, M. C. 2004 “Modeling Dynamic Behavior of Diesel Fuel Injection Systems” SAE Paper No. 2004-01-0536
  14. Coldren, D. R. Schuricht, S. R. Smith, R.A. 2002 “Hydraulic Electronic Unit Injector with Rate Shaping Capability” SAE Paper No. 2002-01-2890
  15. Gebert, K. Barkhimer, R. L. Beck, N. J. Wickman, D. D. Tanin, K. V. Das, S. Reitz, R.D. 1998 “An Evaluation of Common Rail, Hydraulically Intensified Diesel Fuel Injection System Concepts and Rate Shapes” SAE Paper No. 981930
  16. Greeves, G. Tullis, S. Barker, B. 2003 “Advanced Two-Actuator EUI and Emission Reduction for Heavy-Duty Diesel Engines” SAE Paper No. 2003-01-0698
  17. Soteriou, C. Smith, M. 1996 “From Concept to End Product - Computer Simulation in the development of the EUI 2000” SAE Paper No. 960866
  18. Catania, A. E. Ferrari, A. Manno, M. 2005 “Development and Application of a Complete Common Rail Injection System Mathematical Model for Hydrodynamic Analysis and Diagnostics” ASME Paper ICES2005-1018. ASME Transactions, Journal of Engineering for Gas Turbines and Power
  19. Catalano, L. A. Tondolo, V. A. Dadone, A. “Dynamic Rise of Pressure in Common Rail Fuel Injection System” SAE Paper No. 2002-01-0210
  20. Baratta, M. Catania A. E. Ferrari, A. 2006 “Hydraulic Circuit Design Keys to Eliminate the dependence of the Injected Fuel on Dwell Time in Multijet Common Rail Systems” ASME Paper ICES 2006-1426
  21. Catania, A. E. Ferrari, A. Manno, M. Spessa, E. 2008 “Experimental Investigation of Dynamics Effects on Multiple-Injection Common Rail System Performance” ASME Transactions, Journal of Engineering for Gas Turbines and Power 130 685 698
  22. Catania, A. E. Ferrari, A. Spessa, E. 2008 “Temperature Variations in the Simulation of High Pressure Cavitating Transient Flows” International Journal of Heat and Mass Transfer Elsevier
  23. Bosch, W. 1966 “The Fuel rate Indicator: a New Measuring Instrument for Display of Individual Injection Characteristics” SAE Paper No. 660749
  24. Zielke, W. 1968 “Frequency-Dependent Friction in Transient Pipe Flow” ASME Transactions, Journal of Basic Engineering 90 109 115
  25. Kagawa, T. Lee, I. Y. Kitagawa, A. Takenaka, T. 1983 “High Speed and Accurate Computing Method of Frequency-Dependent Friction in Laminar Pipe Flow for Characteristics Method” Transactions of the Japanese Society of Mechanical Engineers 49 2638 2644
  26. Bejan, A. 1997 “Andvanced Engineering Thermodynamics” John Wiley & Sons New York
  27. Catania, A. E. Dongiovanni, C. Mittica, A. Negri, C. Spessa, E. 1997 “Experimental Evaluation of Injector-Nozzle-Hole Unsteady Flow Coefficients in Light Duty Diesel Injection Systems” 9 th International Pacific Conference on Automotive Engineering, SAE-Indonesia 1 283 290 IPC-9 PRICE PAPER AWARD from SAE-Indonesia
  28. Von Kuensberg Sarre, C. Kong Song-Charng Reitz, R. D. 1999 “Modeling the Effects of Injector Nozzle Geometry on Diesel Sprays” SAE Paper No. 1999-01-0912
  29. Benedict, R. P. 1980 “Fundamentals of Pipe-Flow” John Wiley & Sons New York
  30. Knefel, T. Sobieszanski, M. 1997 “A Comparison of Unit Injector and Pump Line Nozzle Systems” SAE Paper No. 970350

Cited By

Recommended Content

Technical Paper Genetic Algorithms Applied to Determine Optimal Trajectories of High Speed Ground Vehicles in Predefined Tracks.
Technical Paper Multi-Objective Optimization of Gerotor Port Design by Genetic Algorithm with Considerations on Kinematic vs. Actual Flow Ripple
Technical Paper A Physical Two-Zone NO x Model Intended for Embedded Implementation