This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Effects of Processing Time on Strengths and Failure Modes of Dissimilar 5754/7075 and 7075/5754 Spot Friction Welds in Lap-Shear Specimens
Technical Paper
2008-01-1138
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
In this investigation, dissimilar 5754/7075 and 7075/5754 spot friction welds were first made under different processing conditions. The spot friction welds in lap-shear specimens were tested under quasi-static loading conditions. The optimal processing times to maximize the failure loads of the 5754/7075 and 7075/5754 welds under lap-shear loading conditions are identified. The maximum failure load of the 7075/5754 welds is about 40% larger than that of the 5754/7075 welds. Optical micrographs of both types of spot friction welds made at different processing times before and after failure are examined. The micrographs show different weld geometries and different failure modes of spot friction welds made at different processing times. The failure modes of the 5754/7075 and 7075/5754 spot friction welds appear to be quite complex and strongly depend on the geometry and the strength of the interfacial surface between the two deformed sheet materials.
Recommended Content
Authors
Citation
Tran, V., Pan, J., and Pan, T., "Effects of Processing Time on Strengths and Failure Modes of Dissimilar 5754/7075 and 7075/5754 Spot Friction Welds in Lap-Shear Specimens," SAE Technical Paper 2008-01-1138, 2008, https://doi.org/10.4271/2008-01-1138.Also In
References
- Thornton P. H. Krause A. R. Davies R. G. 1996 The Aluminum Spot Weld. Welding Journal 75 101s 108s
- Gean A. Westgate S. A. Kucza J. C. Ehrstrom J. C. 1999 Static and Fatigue Behavior of Spot-Welded 5182-O Aluminum Alloy Sheet. Welding Journal 78 80s 86s
- Sakano R. Murakami K. Yamashita K. Hyoe T. Fujimoto M. Inuzuka M. Nagao Y. Kashiki H. 2001 Development of Spot FSW Robot System for Automobile Body Members Proceedings of the 3 rd International Symposium of Friction Stir Welding, Kobe Japan Sep 27-28 2001
- Iwashita T. 2003 Method and Apparatus for Joining. US Patent 6601751 B2 August 5 2003
- Lin P.-C. Lin S.-H. Pan J. Pan T. Nicholson J. M. Garman M. A. 2004 Microstructures and Failure Modes of Spot Friction Welds in Lap-Shear Specimens of Aluminum 6111-T4 Sheets SAE Technical Paper No. 2004-01-1330 , Society of Automotive Engineers Warrendale, PA
- Pan T. Joaquin A. Wilkosz D. E. Reatherford L. Nicholson J. M. 2004 Spot Friction Welding for Sheet Aluminum Joining Proceedings of the 5 th International Symposium of Friction Stir Welding, Metz France Sep 14-16 2004
- Fujimoto M. Inuzuka M. Nishio M. Nakashima Y. 2004 Development of Friction Spot Joining (Report 1) - Cross Sectional Structures of Friction Spot Joints The National Meeting of Japan Welding Society 74 4 5
- Fujimoto M. Inuzuka M. Nishio M. Nakashima Y. 2004 Development of Friction Spot Joining (Report 2) - Mechanical Properties of Friction Spot Joints The National Meeting of Japan Welding Society 74 6 7
- Hinrichs J. F. Smith C. B. Orsini B. F. DeGeorge R. J. Smale B. J. Ruehl P. C. 2004 Friction Stir Welding for the 21 st Century Automotive Industry. Proceedings of the 5th International Symposium of Friction Stir Welding, Metz France Sep 14-16 2004
- Mitlin D. Radmilovic V. Pan T. Chen J. Feng Z. Santella M. L. 2006 Structure-Properties Relations in Spot Friction Welded (also Known as Friction Stir Spot Welded) 6111 Aluminum. Materials Science and Engineering A 441 79 96
- Tran V.-X. Lin P.-C. Pan J. Pan T. Tyan T. 2007 Failure Loads of Aluminum 6111-T4 Spot Friction Welds under Quasi-Static and Dynamic Loading Conditions SAE Technical Paper No. 2007-01-0983 , Society of Automotive Engineers, Warrendale, PA
- Lin P.-C. Pan J. Pan T. 2005 Fracture and Fatigue Mechanisms of Spot Friction Welds in Lap-Shear Specimens of Aluminum 6111-T4 Sheets SAE Technical Paper No. 2005-01-1247 , Society of Automotive Engineers, Warrendale, PA
- Lin P.-C. Pan J. Pan T. 2006 Fatigue Failures of Aluminum 6111-T4 Spot Friction Welds Under Cyclic Loading Conditions. SAE Technical Paper No. 2006-01-1207 , Society of Automotive Engineers, Warrendale, PA
- Lin P.-C. Pan J. Pan T. 2008 Failure Modes and Fatigue Life Estimations of Spot Friction Welds in Lap-Shear Specimens of Aluminum 6111-T4 Sheets, Part 1: Welds Made by a Concave Tool. International Journal of Fatigue 30 74 89
- Lin P.-C. Pan J. Pan T. 2008 Failure Modes and Fatigue Life Estimations of Spot Friction Welds in Lap-Shear Specimens of Aluminum 6111-T4 Sheets, Part 2: Welds Made by a Flat Tool. International Journal of Fatigue 30 90 105
- Tran V.-X. Pan J. Pan T. 2008 Fatigue Behaviors of Aluminum 5754-O Spot Friction Welds in Lap-Shear Specimens SAE Technical Paper No. 08M-71, Society of Automotive Engineers, Warrendale, PA
- Pan T. 2007 Friction Stir Spot Welding (FSSW) - A Literature Review SAE Technical Paper No. 2007-01-1702 , Society of Automotive Engineers, Warrendale, PA
- Tozaki Y. Uematsu Y. Tokaji K. 2006 Effect of Welding Condition on Tensile Strength of Dissimilar Friction Stir Spot Welds between Different Aluminum Alloys Proceedings of 6 th International Symposium on Friction Stir Welding, Saint-Sauveur, Nr Montreal Canada Oct 10 - 13 2006
- Su P. Gerlich A. North T.H. Bendzsak G.J. 2007 Intermixing in Dissimilar Friction Stir Spot Welds Metallurgical and Materials Transactions A. 8 March 2007 584 595