This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Reciprocating Engine Piston Secondary Motion - Literature Review
Technical Paper
2008-01-1045
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The piston secondary motion is an important phenomenon in internal combustion (IC) engine. It occurs due to the piston transverse and rotational motion during piston reciprocating motion. The piston secondary motion results in engine friction and engine noise. There has been lot of research activities going on in piston secondary motion using both analytical models and experimental studies. These studies are aimed at reducing the engine friction as well as the noise generated due to piston secondary motion. The aim of this paper is to compile the research actives carried out on the piston secondary motion and discuss the possible research opportunities for reducing the IC engine piston secondary motion.
Recommended Content
Authors
Citation
Edara, R., "Reciprocating Engine Piston Secondary Motion - Literature Review," SAE Technical Paper 2008-01-1045, 2008, https://doi.org/10.4271/2008-01-1045.Also In
References
- Ciulli E “A review of internal combustion engine losses part 1: specific studies on the motion of pistons, valves and bearings,” Proceedings of Institute of Mechanical Engineers 206 1992 223 236
- Taraza Dinu Henein Naeim Bryzik Walter “Friction losses in multi-cylinder diesel engines,” SAE paper 2000-01-0921
- Keribar Rifat Dursunkaya Zafer “A Comprehensive Model of piston skirt lubrication,” SAE paper 920483
- Dursunkaya Zafer Keribar Rifat “Simulation of secondary dynamics of articulated and conventional piton assemblies.” SAE paper 920484
- Goenka Pawan K Meernik Paul R “Lubrication analysis of piston skirts,” SAE paper 920490
- Zhu Dong Cheng Herbert S Arai Takayuki Hamai Kyugo “A numerical simulation analysis for piston skirts in mixed lubrication - part I: Basic modeling,” ASME journal of tribology 114 1992 553 562
- Zhu Dong Cheng Herbert S Arai Takayuki Hamai Kyugo “A numerical simulation analysis for piston skirts in mixed lubrication - part II: Deformation considerations,” ASME journal of tribology 115 1993 125 133
- Keribar Rifat Dursunkaya Zafer Ganapathy Venkatesh “An integrated design methodology to address piston tribological issues,” SAE paper 930793
- Dursunkaya Zafer Keribar Rifat Ganapathy Venkatesh “A model of piston secondary motion and elastohydrodynamic skirt lubrication” ASME journal of tribology 116 1994 777 785
- Liu K Xiu Y B Gui C L “A comprehensive study of the friction and dynamic motion of the piston assembly,” Proceedings of Institute of Mechanical Engineers 212 1998 221 226
- Richmond J W Parker D A “The quantification and reduction of piston slap noise,” Proceedings of Institute of Mechanical Engineers 201 1987 235 244
- De Luca Julio Cesar Lalor Nicholas Gerges Samir N Y “Piston slap assessment model,” SAE paper 982942
- Ligier Jean-Louis Ragot Patrick “Piston pin: wear and rotating motion,” SAE paper 2005-01-1651
- Tomanic Eduardo Nigro Francisco E B “Piston ring pack and cylinder wear modeling,” SAE paper 2001-01-0572
- Haubner Frank Georg “Simulation of the piston and piston ring dynamic,” SAE paper 2001-01-3368
- Stanley Richard Taraza Dinu Henein Naeim “A simplified friction model of the piston ring assembly,” SAE paper 1999-01-0974
- Kazmierczak A “Computer simulation of piston - piston ring - cylinder liner coactions in combustion engines,” 2004 Proceedings Institute of Mechanical Engineers 218
- Shah Paras Mourelatos Zissimos P. Patel Prashant “Piston secondary motion dynamics considering Elastohydrodynamic lubrication,” SAE paper 2007-01-1251
- Neale M J “The tribology of engine design,” 1992 Proceedings of Institute of Mechanical Engineers 206 197 207
- Gerges S N Y De Luca J C Lalor N “The influence of cylinder lubrication on piston slap,” 2002 Journal of Sound and Vibration 527 557
- Jang S Cho J “Effects of skirt profiles on the piston secondary movements by the lubrication behaviors,” International journal of automotive technology 2004 5 23 31
- Duyar Mustafa Bell David Perchanok Mathias “A Comprehensive piston skirt lubrication model using a mass conserving EHL algorithm,” SAE paper 2005-01-1640
- Balakrishanan S Rahnejat H “Isothermal transient analysis of piston skirt-to-cylinder wall contacts under combined axial, lateral and tilting motion” Journal of physics, Institute of physics 2005
- Zweiri Y H Whidborne J F Seneviratne L D “Instantaneous friction components model for transient engine operation,” 2000 Proceedings, Institute of Mechanical Engineers 214 809 824
- Zweiri Y H Whidborne J F Seneviratne L D “Dynamic simulation of a single cylinder diesel engine including dynamometer modeling and friction,” 1999 Proceedings, Institute of Mechanical Engineers 213
- Zweiri Yahya H Whidborne James F Seneviratne Lakmal D “A mathematical transient model for the dynamics of a single cylinder diesel engine,” International conference on simulation 1998 145 151
- Mansouri S H Wong V W “Effects of piston design parameters on piston secondary motion and skirt-liner friction,” SAE paper 2004-01-2911
- Tsujiuchi Nobutaka Koizumi Takayuki Hamada Keita Okamura Masahiro Tsukijima Hisashi “Optimization of profile for reduction of piston slap excitation,” SAE paper 2004-32-0022
- Patel Prashant Mourelatos Zissimos P. shah Paras “A Comprehensive Method for Piston Secondary Dynamics and Piston-Bore Contact,” SAE paper 2007-01-1249
- Carden Phil Bell David Priest Martin Barrell Dave “Piston assembly friction losses: Comparison of measured and predictable data,” SAE paper 2006-01-0426
- Nakayama Kei Tamaki Seiji Miki Hiroyuki Takiguchi Masaaki “The effect of Crank offset on piston friction force in a gasoline engine,” SAE paper 2000-01-0922
- Sato Kenji Fujii Kinya Ito Makoto Koda Shinsuke “Application to engine development of friction analysis by piston secondary motion simulation in consideration of cylinder block bore distortion,” SAE paper 2006-01-0428
- Perchanok Mathias “Modeling of piston-cylinder lubrication with a flexible skirt and cylinder wall,” SAE paper 2000-01-2804
- Cho S H Ahn S T Kim Y T “A Simple model to estimate the impact force induced by piston slap,” Journal of Sound and Vibration 2002 229 242
- Kunzel Reiner Tunsch Michael Werkmann Martin “Piston related noise with spark ignition engines - Characterization, quantification and mechanisms of excitation,” SAE paper 2000-01-3311
- Paranjpe Rohit S “Development of a Math based piston noise model,” SAE paper 980564
- Geng Z Chen J “Investigation into piston-slap-induced vibration for engine condition simulation and monitoring,” JSV paper 2004 282 735 751
- Ragot Patrick Rebbert Martin “Investigation of crank offset and its influence on piston and piston ring friction behavior based on simulation and testing,” SAE paper 2007-01-1248
- Nakashima Kazuhiro Yajima Yuji Suzuki Kyochi “Approach to minimization of piston slap force for noise reduction - investigation of piston slap force by numerical simulation,” JSAE review paper 1999 211 216
- Offner G Krasser J Laback O Priebsch H H “Simulation of multi-body dynamics and elastohydrodynamic excitation in engines especially considering piston-liner contact,” 2001 Proceedings, Institute of Mechanical Engineers 215 93 102
- Offner Gunter Herbst Hubert M priebsch Hans H “A methodology to simulate piston secondary movement under lubricated contact conditions,” SAE paper 2001-01-0565
- Haddad Sam D “Theoretical treatment of piston motion in I.C.piston engine for the prediction of piston slap excitation,” Mech. Mach. Theory 1995 30 253 269
- Haddad Sam D Tjan Kek-Tjen “An analytical study of offset piston and crankshaft design and the effect of oil film on piston slap excitation in a diesel engine,” Mech. Mach. Theory 1995 30 271 284
- Hoffman Rebecca M Sudjianto Agus Du Xiaoping Stout Joseph “Robust piston design and optimization using piston secondary motion analysis,” SAE paper 2003-01-0148
- Kimura Tesuya Takahashi Kazuki Sugiyama Shigeru “Development of a piston secondary motion analysis program with elastically deformable piston skirt,” SAE paper 1999-01-3303
- Ma Zheng-Dong Perkins Noel C “An efficient Multibody dynamics model for Internal combustion engine systems,” Multibody system dynamics 2003
- Schiehlen W Seifried R “Three approaches for elastodynamic contact in multibody dynamics” Multibody System dynamics paper 2004
- Cho Myung-Rae Oh Dae-Yoon Moon Tae-Seon Han Dong-Chul “Theoretical evaluation of the effects of crank offset on the reduction of engine friction,” 2003 Proceedings, Institute of Mechanical Engineers 217 891 898
- Kurbet S. N. Kumar R Krishna “Mechanics and stress analysis of piston ring in multibody single cylinder internal combustion engine - FE analysis,” SAE paper 2001-01-3371
- Panayi Andreas Schock Harold Chui Boon-Keat Ejakov Mikhail “Parameterization and FEA approach for the assessment of piston Characteristics,” SAE paper 2006-01-0429
- Zhang You Zhang Yong Gao Bina Zhang Baozhong “Structural design & FEA of LHR (Low Heat Rejection) piston for vehicle engines,” SAE paper 981488
- Taylor R I Evans P G “In-situ piston measurements,” 2004 Proceedings, Institute of Mechanical Engineers 218 185 200
- Dwyer-Joyce R. S. Green D A Harper P Lewis R Balakrishnan S King P D Rehanejat H Howell-Smith S “The measurement of liner-piston skirt oil film thickness by an ultrasonic means,” SAE paper 2006-01-0648
- Kim Kwang-soo Godward Thom Takiguchi Masaaki Aoki Shuma “Part 2: The effects of lubricating oil film thickness distribution on gasoline engine piston friction,” SAE Paper 2007-01-1247
- Mufti Riaz A Priest Martin “Experimental evaluation of piston assembly friction under motored and fired conditions in a gasoline engine,” ASME transactions, Journal of tribology 2005 127 826 836
- Teraguchi Sunao Suzuki Wataru Takiguchi Masaaki Sato Daijiro “Effects of lubricating oil supply on reductions of piston slap vibration and piston friction,” SAE paper 2001-01-0566
- Madden Dermot Kim Kwang-soo Takiguchi Masaaki “Part 1: Piston friction and Noise study of three different piston architectures for an automotive gasoline engine,” SAE paper 2006-01-0427
- Weiss Robert E “Evaluation of cost effective coatings for automotive piston and pin assemblies” SAE Paper 2006-01-0646
- Prata A T Fernandes J R S Fagotti F “Dynamic analysis of piston secondary motion for small reciprocating compressors,” ASME transactions, Journal of tribology 2000 122 752 760
- Matsuo Kazunori Kiga Shinchi Murata Satoshi Satou Naoyuki Miyake Hidenori Suzuki Kiyohisa Sugiyama Kiyokazu Monchujo Takayuki “Reduction of piston system friction by applying a bore circularity machining technique to the cylinder block,” SAE paper 2005-01-1656