This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Advanced Injection Strategies to Attain Partially Premixed Combustion Process in a Heavy Duty Diesel Engine
Technical Paper
2008-01-0642
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The scope of present study is the analysis of the potential of the highly premixed combustion concept for pollutant control in a HD Diesel engine. Two different approaches to attain this advanced combustion concept are presented in this paper. A narrow angle nozzle configuration is investigated with two different adapted piston bowl geometries. Parametrical tests were performed in a HD single cylinder engine with the aim of appreciating advantages and limitations of these strategies. In each case, results are compared with equivalent conventional single injection strategy. This analysis is focused on NOx-soot emissions and also on engine performance.
Recommended Content
Authors
- Jesús Benajes - Universidad Politécnica de Valencia, CMT-Motores Térmicos
- Santiago Molina - Universidad Politécnica de Valencia, CMT-Motores Térmicos
- Ricardo Novella - Universidad Politécnica de Valencia, CMT-Motores Térmicos
- Simon Arthozoul - Universidad Politécnica de Valencia, CMT-Motores Térmicos
Topic
Citation
Benajes, J., Molina, S., Novella, R., and Arthozoul, S., "Advanced Injection Strategies to Attain Partially Premixed Combustion Process in a Heavy Duty Diesel Engine," SAE Technical Paper 2008-01-0642, 2008, https://doi.org/10.4271/2008-01-0642.Also In
References
- Kittelson DB Arnold M Watts WF Review of diesel particulate matter sampling methods Final report University of Minnesota for the U.S. Environmental Protection Agency 1999
- Dec JE Canaan RE PLIF imaging of NO formation in a DI diesel engine SAE Paper 980147
- Kitamura Y Mohammadi A Ishiyama T Shioji M Fundamental Investigation of NO x Formation in Diesel Combustion Under Supercharged and EGR Conditions SAE Paper 2005-01-0364 2005
- Dec JE A conceptual model of DI Diesel combustion based on laser-sheet imaging SAE Paper 970873 1997
- Flynn PF Durrett RP Hunter GL zur Loye AO Akinyemi OC Dec JE Westbrook CK Diesel combustion: An integrated view combining laser diagnostics, chemical kinetics, and empirical validation SAE Paper 1999-01-0509 1999
- Xu Y Lee CF Investigation of soot formation in diesel combustion using forward illumination light extinction (FILE) technique SAE Paper 2004-01-1411
- Kimura S Ogawa H Matsui Y Enomoto Y An experimental analysis of low-temperature and premixed combustion for simultaneous reduction of NO x and particulate emissions in direct injection Diesel engines International Journal of Engine Research 3 o 4 249 259 2002
- Miles P Choi D Pickett LM Singh IP Henein N RempelEwert BA Yun H. Reitz RD Rate-Limiting Processes in Late-Injection, Low Temperature Diesel Combustion Processes THIESEL Conference Proceedings 2004
- Ryan TW Callahan TJ Homogeneous charge compression ignition of diesel fuel SAE Paper 961160 1996
- Wagner U Anca R Velji A Spicher U An experimental study of homogeneous charge compression ignition (HCCI) with various compression ratios, intake air temperatures and fuels with port and direct fuel injection SAE Paper 2003-01-2293 2003
- Flowers DL Aceves SM Babajimopoulos A Effect of Charge Non-Uniformity on Heat Release and Emissions in PCCI Engine Combustion SAE Paper 2006-01-1363 2006
- Epping K Aceves SM Bechtold R Dec JE The potential of HCCI combustion for high efficiency and low emissions SAE Paper 2002-01-1923 2002
- Benajes J Margot X Pastor JM Novella R Computational study of new injection strategies on HD Diesel engines SIA International congress Lyon, France 2005
- Benajes J Margot X Pastor JM Novella R Potential of a two stage combustion concept for reducing pollutant emissions in a HD Diesel engine SIA International congress Lyon, France 2006
- Ishiyama T Shioji M Ihara T Katsuura A Modeling and Experiments on Ignition of Fuel Sprays Considering the Interaction Between Fuel-Air Mixing and Chemical Reactions SAE Paper 2003-01-1071 2003
- Aroonsrisopon T Sohm V Werner P Foster DE Morikawa T Lida M An investigation into the effect of fuel composition on HCCI combustion characteristics SAE Paper 2002-01-2830 2002
- Zheng J Yang W Miller DL Cernansky NP Prediction of pre-ignition reactivity and ignition delay for HCCI using a reduced chemical kinetic model SAE Paper 2001-01-1025 2001
- Peng Z Zhao H Ladommatos N Effects of air/fuel ratios and EGR rates on HCCI combustion of n-heptane, a diesel type fuel SAE Paper 2003-01-0747 2003
- Mueller CJ Martin GC Briggs TE Duffy KP An experimental investigation of in-cylinder processes under dual-injection conditions in a DI diesel engine SAE Paper 2004-01-1843 2004
- Christian R Knopf F Jasmek A Schindler WA New Method for the Filter Smoke Number Measurement with Improved Sensitivity (in German) MTZ 54 16 22 1993
- Bosch W Fuel rate indicator is a new instrument for display of the characteristics of individual injection SAE Paper 660749 1966
- Lapuerta M Armas O Hernández JJ Diagnostic of D.I. Diesel Combustion from In-Cylinder Pressure Signal by Estimation of Mean Thermodynamic Properties of the Gas Applied Thermal Engineering 19 o 5 513 529 1999
- Payri F Molina S Martín J Armas O Influence of measurement errors and estimated parameters on combustion diagnosis Applied Thermal Engineering 26 o 2-3 226 236 2006
- Way RJB Methods for determination of composition and thermodynamic properties of combustion products for internal combustion engine calculations Proceedings of the Institution of Mechanical Engineers 190 o 60 686 697 1976
- Arrègle J López JJ García JM Fenollosa C Development of a zero-dimensional Diesel combustion model. Part 1: Analysis of the quasi-steady diffusion combustion phase Applied Thermal Engineering 23 o 11 1301 1317 2003
- Arrègle J López JJ García JM Fenollosa C Development of a zero-dimensional Diesel combustion model: Part 2: Analysis of the transient initial and final diffusion combustion phases Applied Thermal Engineering 23 o 11 1319 1331 2003
- Siebers DL Liquid-phase fuel penetration in Diesel spray SAE paper 980809 1998
- Desantes JM Pastor JM Martínez S Riesco JM Experimental Characterization of the liquid phase penetration on evaporating diesel spray SAE paper 2005-01-2095 2005
- Hardy WL Reitz RD An experimental investigation of partially premixed combustion strategies using multiple injections in a heavy-duty Diesel engine SAE paper 2006-01-0917 2006
- Alkidas AC Combustion characteristics of a single-cylinder open-chamber Diesel Journal of Engineering for Gas Turbines and Power, Transactions of the ASME 109 o 4 419 425 1987