Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Selection of Welding Parameter during Friction Stir Spot Welding

Journal Article
2008-01-0146
ISSN: 1946-3979, e-ISSN: 1946-3987
DOI: https://doi.org/10.4271/2008-01-0146
Published April 14, 2008 by SAE International in United States
Selection of Welding Parameter during Friction Stir Spot Welding
Sector:
Citation: Gerlich, A., Yamamoto, M., Shibayanagi, T., and North, T., "Selection of Welding Parameter during Friction Stir Spot Welding," SAE Int. J. Mater. Manf. 1(1):1-8, 2009, https://doi.org/10.4271/2008-01-0146.
Language: English

References

  1. Sakano R. Murakami K. Yamashita K. Hyoe T. Fujimoto M. Inuzuka M. Nagao Y. Kashiki H. Proc. 7th Int. Symp. of JWS 2001 Kobe, Japan JWS 645 650
  2. Freeney T.A. Sharma S.R. Mishra R.S. Effect of Welding Parameters on Properties of 5052 Al Friction Stir Spot Welds SAE Technical Paper # 2006-01-0969
  3. Gerlich A. Yamamoto M. North T.H. Local melting and tool slippage in Al-alloy friction stir spot welds Special Issue on Friction Stir Welding, J. Materials Science 10.1007/s10853-007-1791-7
  4. Gerlich A. Local melting and tool slippage during friction stir spot welding of Al-alloys Department of Materials Science, University of Toronto Toronto, Canada November 2007
  5. Su P. Gerlich A. North T.H. Energy generation and stir zone dimensions in friction stir spot welds SAE 2006 Transactions, Paper # 2006-01-0971
  6. Su P. Gerlich A. North T.H. Bendzsak G.J. Energy generation and utilization during friction stir spot welding Sci. Technol. Welding and Joining 2006 11 2 163 169
  7. Zettler R. Friction stir seam welding of Al-alloy base material University-Industry International Workshop (UIIW) Frontiers of Science and Technology of Welding June 2007 Nantes, France
  8. Gerlich A. Cingara G.A. North T.H. Stir Zone Microstructure and Strain Rate during Al 7075-T6 Friction Stir Spot Welding Metallurgical and Materials Transactions A 37A 2773 2786
  9. Su P. Gerlich A. North T.H. Bendzsak G.J. Intermixing during friction stir spot welding Metall. Trans. 38A 3 584 595
  10. Gerlich A. Su P. Yamamoto M. North T.H. Effect of welding parameters on the strain rate and microstructure of Friction Stir Spot welded 2024 Aluminum alloy J. Materials Science 10.1007/s10853-006-1103-7
  11. Gerlich A. Su P. North T.H. Tool penetration during friction stir spot welding of Al and Mg alloys Journal of Materials Science 2005 40 6473 81
  12. Gerlich A. Su P. North T. H. Bendzsak G.J. Friction stir spot welding of aluminum and magnesium alloys Materials Forum 29 Nie J.F. et al. 290 294
  13. Su P. Gerlich A. North T.H. Friction stir welding of aluminum and magnesium sheets SAE Technical Series # 2005-01-1255
  14. Yamamoto M. Gerlich A. North T.H. Shinozaki K. Liquid Penetration Induced Cracking (LPI) in AZ91 Friction Stir Spot Welds J. Japn. Weld. Soc. 2007
  15. Yamamoto M. Gerlich A. North T.H. Shinozaki K. Mechanism of Cracking in AZ91 friction stir spot welds Sci. Tech. Weld. Joining 12 3 208 216
  16. Yamamoto M. Gerlich A. North T.H. Shinozaki K. Cracking in the stir zone of Mg-alloy friction stir spot welds J. Mat. Sci. 10.1007/s10853-007-0662-2
  17. Gerlich A. Su P. Yamamoto M. North T.H. Material Flow and Dissimilar Intermixing in Friction Stir Welding Special Issue, Sci. Eng. Tech. Welding and Joining 2007
  18. Yamamoto M. Gerlich A. North T.H. Shinozaki K. Cracking in Dissimilar Mg-alloy Friction Stir Spot Welds Sci. Tech. Welding and Joining 2007
  19. Gerlich A. Yamamoto M. North T. H. Local Melting and Cracking in Al 7075-T6 and Al 2024-T3 Friction Stir Spot Welds Sci. Tech. Weld. Joining 2007

Cited By

Recommended Content

Technical Paper Plasma Arc Welding for Large Titanium Aerospace Structures
Technical Paper Effect of Welding Parameters on Properties of 5052 Al Friction Stir Spot Welds
Technical Paper Effect of Joining Parameters on Performance of Similar and Dissimilar AA5754-H22 and AA6082-T6 Friction Stir Spot Welded Aluminium Alloys