This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Review On Effects of Piston and Piston Ring Dynamics Emphasis with Oil Consumption and Frictional Losses in Internal Combustion Engines
Technical Paper
2007-24-0059
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Modern I C. Engines are expected to strictly adhere to efficiency standards and to be ecofriendly. Among the several factors, oil consummation and frictional power losses play vital roles in the performance of IC engines. A thorough understanding of lubrication condition at piston- ring-cylinder liner interface is vital in determining the source of frictional loses and consumption of lubricating oil. This literature review presents the synthesis of the main technical contributions already published in the IC engine field and mainly discuses the piston and piston ring dynamics in internal combustion engines and highlights the work done in modeling of primary and secondary motion of piston and piston ring for almost four decades. The paper also highlights the effects of piston and piston ring motion with regards to lubrication and frictional losses in internal combustion engines and discuses the methods used to estimate the lubricating oil film thickness, methods used to estimate the friction and reduce the friction. This review reveals that in order to understand the complete and complex dynamics of piston and ring, a three-dimensional approach is required; hence the author proposes a study to understand the complete behavior of the piston and piston ring by making a three-dimensional finite element model of the complete engine and plans to optimize the design parameter and estimate the oil consumption and frictional losses by simulating the model.
Recommended Content
Citation
Kurbet, S. and Malagi, R., "Review On Effects of Piston and Piston Ring Dynamics Emphasis with Oil Consumption and Frictional Losses in Internal Combustion Engines," SAE Technical Paper 2007-24-0059, 2007, https://doi.org/10.4271/2007-24-0059.Also In
References
- Ungar E.E Ross D. “Vibration And Noise Due To Piston Slap In Reciprocating Machines” Journal Of Sound And Vibration 2 2 132 132 146 1965
- Griffiths W.J. Skoreki, J. “Some Aspects Of Vibration On Single Cylinder Diesel Engine” Journal Of Sound And Vibration 4 345 364 1967
- Mcgeehan James A 1978 “A Literature Review Of The Effects Of Piston & Ring Friction & Lubrication Oil Viscosity On Fuel Economy” SAE 780673
- Moore S. L. Hamilton G.M. 1978 “The Starved Lubrication Of Piston Rings In A Diesel Engine” Journal Mechanical Engineering Science 1978
- Brown S.R Hamilton G M (1978) “Negative Pressures Under The Lubricated Ring.” Journal Of Mechanical Engineering Science 20 1 1978
- Li, D.F Rohde S.M. Ezzat, H. A. “An Automotive Piston Lubrication Model” ASLE Transactions 26 2 151 160 1982
- Knoll, G.D Peeken H.J. “Hydrodynamic Lubrication Of Piston Skirts” ASME Journal Of Lubrication Technology 104 Oct 1982
- Goto Takaharu Aoyama Shun-Ichi Nagumo Shin- Ichi Nakajimi Yasuo Onoda Michio 1985 “Measurement Of Piston & Piston Ring Assembly Friction Force” SAE 851671
- Holt Jeremy W Edward J. Murray 1986 “A Two Ring Piston For Gasoline Engine” SAE 860248
- Oh. K.P.C.H. Goenkap, K. “Elastohydrodyna-mic Lubrication Of Piston Skirts” ASME Journal Of Tribology 109 April 1987
- Ohta Kazuhide Ire Yoshihiko Yamamoto Kiichi Ishikawa Hideyuki “Piston Slap Induced Noise & Vibration Of Internal Combustion Engines (1 st Report Theoretical Analysis & Simulation)” SAE 870990
- Gauthier A Constans B. Perrin H. Roux F. 1987 “Lubricants Effects On Piston / Rings/ Liner Friction In An Instrumented Single Cylinder Diesel Engine” SAE 872034
- Zissimos P. Mourelatos 1988 “Trajectory Of A Ringless Piston Within The Cylinder Of An Internal Combustion Engine With A Cross Head Design” SAE 880194
- Ku Young Gon Donald J. 1988 “Piston And Ring Friction By The Fixed Sleeve Method” SAE 880571
- Eric W. Schinder Daneil H. Blossfeld 1990 “Method For Measurement Of Piston Ring Rotation In An Operating Engine” SAE 900224
- Zissimos P. Mourelatos 1990 Side-Load Capacity Of An Unlubricated Ringless Piston” SAE 900688
- Durusunkaya, Z Keribar, R. “Simulation Of Secondary Dynamics Of Articulated And Conventional Piston Assemblies” SAE 920483 1992
- Durusunkaya, Z Keribar, R. “Comprehensive Method Of Piston Skirt Lubrication” SAE 920483 1992
- Jeng Yeau - Ren 1992 “Theoretical Analysis Of Piston Ring Lubrication Part-I Fully Flooded Lubrication” Tribology Transactions 35 1992 4 696 706
- Jeng Yeau - Ren 1992 “Theoretical Analysis Of Piston Ring Lubrication Part-Ii- Starved Lubrication And Its Application To A Complete Ring Pack.” Tribology Transactions 35 1992 4 707 714
- Grice Neil Sherrington Ian Smith Edward H 1992 “The Influence Of Variable Ring Face Profile & Bore Shape On Piston Ring Behavior In Internal Combustion Engines” SAE 920059
- Ito Akemi Hitosugi Hideshi Furuhama Sahoichi 1993 “Measurements Of Piston -Skirt Deformation In Engine Operation By Means Of Rotating Cylinder With Gap-Sensors” SAE 930717
- Ping C. Sul Ariga Susumu 1993 “Piston Ring Pack Friction & Lubrication Analysis Of An Automotive Engine Using A Mixed Lubrication Model” SAE 931937
- Hegemier Tim Stewart Mike 1993 “Some Effects Of Liner Finish On Diesel Engine Operating Characteristics” SAE 930716
- Schneider Eric W Blossfeld Daniel H. Lechman Donald C. Robert F. Hill Richard F. Reising 1993 “Effect Of Cylinder Bore Out-Of-Roundness On Piston Ring Rotation & Engine Oil Consumption” SAE 930796
- Ting L.L. 1993 “Development Of A Reciprocating Test Rig For Tribological Studies Of Piston Engine Moving Components” -Part 1: Rig Design & Piston Ring Friction Coefficients Measuring Method” SAE 930685
- Ting L.L. 1993 “Development Of A Reciprocating Test Rig For Tribological Studies Of Piston Engine Moving Components” -Part Ii: Measurements Of Piston Ring Friction CoEfficient & Rig Test Confirmation” SAE 930686
- Dursunkaya Zafer Keribar Rifat Ganapathy Venkatesh 1994 “A Model Of Piston Secondary Motion And Elastohydrodynamic Skirt Lubrication” Journal Of Tribology
- Yoshida Hideki Sugihara Hiroyuki Kusuma Kazanori 1995 “Practical Use Of Two Piston Ring Set For Gasoline Engine” SAE 950817
- Mihara Kenji Inoue Hiroaki 1995 “Effect Of Piston Top Ring Design On Oil Consumption” SAE 950937
- Hill Stephen H Kantola Troy C Brown James R Hamelink Joseph C 1995 “An Experimental Study Of The Effect Of Cylinder Bore Finish On Engine Oil Consumption” SAE 950938
- Arcoumanis C. Duszynski M. Flora H. Ostovar P. 1995 “Development Of Piston Ring Lubrication Test- Rig & Investigation Of Boundary Conditions For Modeling Lubricant Film Properties” SAE 952468
- Deearlove Janice Wai K. Cheng. “Simultaneous Piston Ring Friction And Oil Film Thickness Measurements In A Reciprocating Test Rig” SAE 19952470
- Richardson D E 1996 “Comparison Of Measured & Theoretical Inter- Ring Pressure On A Diesel Engine” SAE 961909
- Knoll G. Peeken, H. Lechtape Gruter, R. Lang, J “Computer Aided Simulation Of Piston And Piston Ring Dynamics” Journal Of Engineering Gas Turbines And Power 118 880 886 1996
- Tian, T. Noordzij, L.B. Wong, V.W. Heywood, J.B “Modeling Piston Ring Dynamics Blow By And Ring Twist Effects” Journal Of Engineering Gas Turbines And Power 1996
- Hitosugi Hideshi Nagoshi Katsuyuki Komada Masaharu Foruhama Shoichi 1996 “Study On Mechanism Of Lubricating Oil Consumption Caused By Cylinder Bore Deformation” SAE 960305
- Nakada Teruo Yamamoto Atsushi Abe Takeshi 1997 “A Numerical Approach For Piston Secondary Motion Analysis And Its Application To The Piston Related Noise” SAE 972043
- Tian Tian Rabute Remi Wong Victor W Heywood John B 1997 “Effects Of Piston)-Ring Dynamics On Ring/Groove Wear And Oil Consumption In A Diesel Engine” SAE 970835
- Ming- Tang Ma, T Herrington I. Smith E.H. Grice N. 1997 “Development Of A Detailed Model For Piston-Ring Lubrication In I.C. Engines With Circular & Non-Circular Cylinder Bores” Tribology International 30 11 1997
- Takiguchi Masaki Nakayama Kei Shoichi F Hideki Y 1998 “Variation Of Piston Ring Oil Film Thickness In An Internal Combustion Engines Comparison Between Thrust & Antitrust Side” SAE 9801
- Tian Tian Wong Victor W Heywood John B 1998 “Modeling The Dynamics And Lubrication Of Three Piece O Control Rings In Internal Combustion Engines” SAE 982657
- Thirouaed Benoist Tian Tian Hart Douglas P. 1998 “Investigation Of Oil Transport Mechanisms In The Piston Ring Pack Of A Single Cylinder Diesel Engine, Using Two Dimensional Laser Induced Fluorescence.” SAE 982658
- Ejakov Mikhail A. Schock Hrold J. Brombolich Lawrence J. 1998 “Modeling Of Ring Twist For An I.C. Engine SAE 982693
- Arconomanis C. Duszy M Lindenkamp H. 1998 “Measurements Of The Lubricant Film Thickness In The Cylinder Of A Firing Diesel Engine” SAE 9820
- Kimura Tetsuya Takahashi Kazuki Sugiyama Shigeru 1999 “Development Of A Piston Secondary Motion Analysis Program With Elastically Deformable Piston Skirt “Sae 1999-01-3303 / J SAE 9938058
- Ejakov, M.A. Diaz, A.R. Chock, H.J “Numerical Optimization Of Ring Pack Behavior.” SAE 1999-01-1521 12
- Ishihara Soichi Nakashima Kohei Urano Keiichi Murata Katasuhiro 1999 “The Design Of Piston & Piston Rings To Reduce Lubricating Oil Flow Into The Combustion Chamber” Sae 1999-01-3316/ J SAE 9938071
- Nakayama Kei Tamaki Seiji Miki Hiroyuki Masaaki 2000 “The Effect Of Crankshaft Offset On Piston Friction Force In A Gasoline Engine” SAE 2000-01-0922
- Richdson D.E. “Review Of Power Cylinder For Gas Turbines And Power Transactions Of ASME 122 Oct 2000
- Tian T. Wong V.W 2000 “Modeling The Lubrication Dynamics, & Effects Of Piston Dynamic Tilt Of Twin-Land Oil Control Rings In Combustion Engines” Journal Of Gas Turbines & Power January 2000 122/119
- Herbst Hurbet M Priebsch Hans H 2000 “Simulation Of Piston Ring Dynamics And Their Effect On Oil Consumption” SAE 2000-01-0919
- Akalin Ozgen Newaz Golam M. 2001 “Piston Ring /Cylinder Bore Friction Modeling In Mixed Lubrication Regime: Part I-Analytical Results” Journal Of Tribology January 2001 123/211
- Akalin Ozgen Newaz Golam M. 2001 “Piston Ring - Cylinder Bore Friction Modeling In Mixed Lubrication Regime: Part 2-Corellation With Bench Test Data” Journal Of Tribology January 2001 123/219
- Rabute R. Tian T. “Challenges Involved In Piston Top Ring Designs For Modern S.I.Engines” Journal Of Engineering For Gas Turbines And Power. Transactions Of ASME 123 April 2001
- Green Itzhak Barnsby Roger M. 2001 “A Simultaneous Numerical Solution For The Lubrication & Dynamic Stability Of No Contacting Gas Face Seals” ASME Transactions 2001
- Duco D.O. Donahue R.J. Ghandhi J.B. 2001 “Design Of Capacitance Probes For Oil Film Thickness Measurements Between The Piston Ring & Liner In Internal Combustion Engines” Journal Of Gas Turbines & Power July 2001 123 / 633
- Tomanik Eduardo Nigro Francisco E. B 2001 “Piston Ring Pack & Cylinder Wear Modeling” Sae 2001-01-0572
- Freolund K. Schramm J. Tian T. Wong V. Hochgreb S. 2001 “Analysis Of The Piston Ring / Liner Oil Film Development During Warm - Up Of A S. I. Engine” Journal Of Engineering For Gas Turbines & Power January 2001 123/109
- Glovnea R.P. Spikes H.A. 2001 “Elatrohydrody Namic Film Collapse During Rapid Deceleration: Part I -Experimental Results” Transaction Of ASME 123 April 2001
- Glovnea R.P. Spikes H.A. 2001 “Elatrohyrody Namic Film Collapse During Rapid Deceleration: Part Ii - Theoretical Analysis & Comparison Of Theory & Experiment” Transaction Of ASME 123 April 2001
- Tian T. 2002 “Dynamic Behavior Of Piston Rings And Their Practical Impact Part I - Ring Flutter And Collapse And Their Effects On Gas Flow And Oil Transport” Journal Engineering Tribology 216 209 228
- Tian T. 2002 “Dynamic Behavior Of Piston Rings And Their Practical Impact Part Ii, Oil Transport, Friction And Wear Of Ring/Liner Interface And The Effects Of Piston Ring Dynamics” Journal Engineering Tribology 216 209 228
- Yilmaz Ertan Tian Tian Wong Victor W Heywood John B “An Experimental & Study Of The Contribution Of Oil Evaporation To Oil Consumption” SAE 2002-01-2684
- Lijima Noaki Miyamoto Tomohiro Takiguchi Masaaki 2002 “An Experimental Study On Phenomena Of Piston Ring Collapse” SAE 2002-01-0483
- Harigaya Y. Suzuki M. Takiguchi M. 2003 “Analysis Of Oil Film Thickness On A Piston Ring Of Diesel Engine: Effect Of Oil Film Temperature” Asme 125 April 2003
- Piao Y. Gulwadi S.D. 2003 “Numerical Investigation Of The Effects Of Axial Cylinder Bore Profiles On Piston Ring Radial Dynamics” Journal Of Gas Turbines & Power October 2003 125/1081
- Hoffman Rebeca M. Sudjianto Agus Du Xiaoping Stout Joseph 2003 “Robust Piston Design And Optimization Using Piston Secondary Motion Analysis” SAE 2003-01-0148
- Jang S. Cho J. 2004 “Effects Of Skirt Profiles On The Piston Secondary Movements By The Lubrication Behaviors” International Journal Of Automotive Technology 5 1 23 31
- Dardalis Dimitrious 2004 “Rotating Liner Engines, A New Approach To Reduce Engine Friction And Increase Fuel Economy In Heavy Duty Engines RLE Technologies Inc. Www. Rotatingliner.Com
- Bolander Nathan W. Steenwyk Brian D. Kumar Ashwin Sadeghi Farshid 2004 “Film Thickness And Friction Measurement Of Piston Ring Cylinder Liner Contact With Corresponding Modeling Including Mixed Lubrication” Proceedings Of Icef-04, 2004 Fall Technical Conference Of The Asme Internal Combustion Engine Division Oct 24-27 California USA
- Kurbet S.N. Kumar R. Krishna 2004 “A Finite Element Study Of Piston Tilt Effects On Piston Ring Dynamics In I.C. Engines” Proceedings Of I.Mech. Engrs.
- Kurbet S.N. Kumar R. Krishna Finite Element Modeling Of Piston And Piston Ring To Study I.C Engine Blowby (Under Review) Journal Of Engine Research Journal ( I.Mech)
- Dunaevsky Valery Alexandrov Sergel 2005 “Three Dimensional Engineering Approach To Conformability Analysis Of Piston Rings” Tribology Transaction 48 108 118
- Masouri S.H. Wong V.W. 2004 “Effects Of Piston Design Parameters On Piston Secondary Motion And Skirt-Liner Friction” SAE 2004-01-2911
- Mufti Riaz A Priest Martin 2005 “Experiment -Al Evaluation Of Piston - Assembly Friction Under Motored & Fired Conditions In A Gasoline Engine.” ASME 127 October 2005
- Bolander N W Steenwyk B D Sadeght F Gerber G R 2005 “Lubrication Regime Transitions At The Piston Ring - Cylinder Liner Interface” Proc. I Mech, Engg 219
- Harigaya Yasuo Suzuki Michiyoshi Toda Fujio Takiguchi Masaaki “Analysis Of Oil Film Thickness & Heat Transfer On A Piston Ring Of A Diesel Engine: Effect Of Lubricant Viscosity” Journal Of Gas Turbines & Power July 2006 128/685
- Manz Devon Cheng Wal K. 2007 “On-Line Measurements Of Engine Oil Aeration By X-Ray Absorption” ASME 2007