This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Assessment of a Numerical Methodology for Large Eddy Simulation of ICE Wall Bounded Non-Reactive Flows
Technical Paper
2007-01-4145
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The increasing of the overall engine performance requires the investigation of the unsteady engine phenomena affecting intake air flow and the air-fuel mixing process. The “standard” RANS methodology often doesn't allow one to achieve a qualitative and quantitative accurate prediction of these phenomena. The aim of this paper is to show the potential and the limits of LES numerical technique in the simulation of actual IC engine flows and to assess the influence of some basic parameters on the LES simulation results. The paper introduces the use of a merit parameter suggested by Pope for evaluating the quality of the LES solution. The CFD code used is Fluent v6.2 and two basic test cases have been simulated. The first one is the flow over a backward facing step in order to perform a preliminary parametric numerical analysis. A one-equation dynamic subgrid-scales turbulence model is used. Then, an adaptive Large Eddy Simulation is performed in order to achieve a quasi-complete Large Eddy Simulation according to the merit parameter. A more complex engine steady flow bench case has been also simulated. A quasi-complete Large Eddy Simulation using the dynamic one-equation model and a simulation with the WALE sgs model have been performed. The quality of the LES results were checked using the merit parameter when the dynamic one-equation model was used. The quality of the results can be rated as reasonably accurate and useful for engineering investigation. If large scale motion effects must be evaluated in engine flows, computational time can be dropped by using the WALE model. The latter allows one to reduce the near wall refinement maintaining a reasonably accuracy in reproducing such large scale flow structures.
Recommended Content
Authors
Citation
Brusiani, F., Forte, C., and Bianchi, G., "Assessment of a Numerical Methodology for Large Eddy Simulation of ICE Wall Bounded Non-Reactive Flows," SAE Technical Paper 2007-01-4145, 2007, https://doi.org/10.4271/2007-01-4145.Also In
References
- Pascaud, S. Boileau, M. Martinez, L. Cuenot, B. Poinsot, T. “LES of steady Spray Flame and ignition sequences in aeronautical combustors” CERFACS TR_CFD_05_07 2005
- Thobois, L. Rymer, G. Souleres, T. Poinsot, T. “Large-Eddy Simulation in IC Engine Geometries SAE Paper 2004-01-1854 2004
- Ham, F. Apte, S. Iaccarino, G. Wu, X. Hermann M. Constantinescu, G. Mahesh, K. Moin, P. “Unstructured LES of reacting multiphase flows in realistic gas turbine combustors” Center for Turbulence Research Annual Brief 2003
- Adomeit, P. Lang, O. Pischinger, S. Aymanns, R. Graf, M. Stapf, G. “Analysis of Cyclic Fluctuations of Charge Motion and Mixture Formation in a DISI Engine in Stratified Operation” SAE Paper 2007-01-1412
- Devesa, A. Moreau, V. Helie, J. Poinsot T. “Large Eddy Simulations of Jet/Tumble Interaction in a Gdi Model Engine Flow” SAE Paper, 2004-01-1997 2004
- Vermorel, 0. Richard, S. Colin, O. Angelberger, C. Benkenida, A. Veynante, D. “Multi-Cycle LES Simulations of Flow and Combustion in a PFI SI 4-Valve Production Engine” SAE paper 2007-01-0151 2007
- Hori, T. Kuge, T. Senda, J. Fujimoto, H. #x0201C;Large Eddy Simulation of Diesel Spray Combustion with Eddy-Dissipation Model and CIP Method by Use of KIVALES” SAE Paper 2007-01-0247 2007
- Dugué, V. Veynante, D. Gauchet N “Applicability of Large Eddy Simulation to the Fluid Mechanics in a Real Engine Configuration by Means of an Industrial Code” SAE Paper 2006-01-1194 2006
- Moreau, V. Barton, I. Angelberger, C. Poinsot, T. “Towards Large Eddy Simulation in Internal-Combustion Engines: simulation of a compressed tumble flow” SAE Paper 2004-01-1995 2004
- Verzicco, R. Mohd-Yosuf, J. Orlandi P. Haworth, D. “Large Eddy Simulation in Complex Geometric Configurations Using Boundary Body Forces” AIAA Journal 38 3 March 2000
- Sone, K. Menon, S. “Effect of Subgrid Modeling on the In-Cylinder Unsteady Mixing Process in a Direct Injection Engine” ASME Journal of Engineering for Gas Turbine and Power 105 435 443 2003
- Thobois, L. et al. “Using LES to Investigate Reacting Flow Physics in Engine Design Process” SAE Paper 2007-01-0166 2007
- Huijnen, V. Sommers, L.M.T. Olbricht, C. Sadiki, A. Baert, R.S.G. de Goey, L.P.H. Janicka, J. “Study of Turbulent Flow Structures of a P ratical Steady Engine Head Flow using Large Eddy Simulations” Journal of Fluids Engineering 128 1181 1191 2006
- Pope, S.B. “Ten questions concerning the large-eddy simulation” New journal of Physics 6 35 2004
- Davidson, L. “LESFOIL, A European Project on Large Eddy Simulation Around High-Lift Airfoil at high Reynolds Number” In proceedings ECCOMAS 2000 Conference 2000
- Medic, G. Daenick, G. Templeton, J.A. Kalitizin, G. “A framework for near-wall RANS-LES Coupling” Center for Turbulence Research Annual Briefs 2005
- Bianchi, G.M. Fontanesi, S. “On the Applications of Low-Reynolds Cubic k-ε Turbulence Models in 3D Simulations of ICE Intake Flows” SAE Journal of Engines 112 29 44 2004
- Thobois, L. 2006
- Colin, O. Rudguyard, M. “Development of High-Order Taylor-Galerkin Schemes for LES ” Journal of Comp. Physics 162 338 371 2000
- Moreau, V. Angelberger, C Colin, O “On the generalisation of High-Order Schemes for Large Eddy Simulation on Moving Unstructured Grid Using an Arbitrary Lagrangian Eulerian Approach” 12 th International Conference on Fluid Flow Technologies Budapest 2003
- Moreau, V. Lartigue, G. Sommerer, Y. Angelberger, C. Colin,. O. Poinsot, T. “Numerical Methods for Unsteady Compressible Multi-Component Reacting Flows on Fixed and Moving Grids” Journal of Computational Physics 202 710 736 2005
- Kim W.-W. Menon S. “Application of the localized dynamic subgrid-scale model to turbulent wall-bounded flows” Technical Report AIAA-97-0210, 35th Aerospace Sciences Meeting Reno, NV January 1997
- Kim S.-E. “Large eddy simulation using unstructured meshes and dynamic sub-gridscale turbulence models” Technical Report AIAA-2004-2548, 34th Fluid Dynamics Conference and Exhibit June 2004
- Eaton, J. Johnston, J. Westphal, R. “Experimental study of flow reattachment in a single-sided sudden expansion” NASA Ames Research Center NASA contractor report 3765 1986
- Ducros, F. Nicoud, F. Poinsot T. “A Wall Adapting Local Eddy-Viscosity Model for Simulation in Complex geometries” Proceedings Conference on Num. Methods in Fluid Dynamics Oxford, UK 1998
- Hinze J. O. Turbulence McGraw-Hill Publishing Co. New York 1975
- Smagorinsky, J. 1963 “General Circulation Experiments with Primitive Equations” Monthly Weather Review 63
- Fluent v6.2 User Manual Fluent Inc.
- Dugué V. Gauchet N. Veynante D. “Applicability of Large Eddy Simulation to the fluid mechanics in a real engine configuration by means of an industrial code” LES for Piston Engine Flows Workshop IFP Paris 2006
- Kim, S.E. et al. ‘Meshing and CFD Accuracy’ Fluent 2005