This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Flex-Fuel Vehicle Development to Promote Synthetic Alcohols as the Basis of a Potential Negative-CO2 Energy Economy
Technical Paper
2007-01-3618
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The engine of a high performance sports car has been converted to operation on E85, a high alcohol-blend fuel containing nominally 85% ethanol and 15% gasoline by volume. In addition to improving performance, the conversion resulted in significant improvement in full-load thermal efficiency versus operation on gasoline. This engine has been fitted in a test vehicle and made flex-fuel capable, a process which resulted in significant improvements in both vehicle performance and tailpipe CO2 when operating solely on ethanol blends, offering an environmentally-friendly approach to high performance motoring. The present paper describes some of the highlights of the development of the flex-fuel calibration to enable the demonstrator vehicle to operate on any mixture of 95 RON gasoline and E85 in the fuel tank. It also discusses how through detailed development, the vehicle has been made to comply with primary pollutant emissions legislation on any ethanol-gasoline mixture up to E85.
The paper presents a strategy for vehicle manufacturers to work with the legislating bodies to accelerate the move towards biofuels. This is based on the desirability of higher performance afforded by alcohol-fuel operation when linked to a CO2-offset factor for vehicles biased towards operation on biomass-derived alcohol-based fuel. It is hoped that this approach of offering an appreciable improvement in performance when using the CO2-beneficial alcohol fuel will encourage purchasers of high-performance vehicles to seek out and use the biofuel preferentially, despite a reduction in tank range due to the reduced volumetric energy content. This strategy will ensure the desirability of alcohol fuelling to the rest of the market, creating a ‘top-down’ effect. It is argued that this will accelerate the proportion of fuel energy usage derived from biofuels at a greater rate than blending it into the general fuel stock on a wholesale basis.
Finally, the development of engines biased towards operation on alcohol-based fuels will allow greater thermal efficiency and increased levels of engine downsizing, both contributing to improved vehicle fuel consumption and hence a greater proportion of distance travelled using renewable fuel. This avenue of development can only be undertaken if encouragement of the infrastructure necessary for the customer to obtain the alcohol-blend fuel is undertaken by the legislating bodies and the fuel companies. While another liquid fuel presents some problems of distribution, it is argued that this approach is preferable to that requiring molecular hydrogen to be distributed to and stored on board passenger vehicles. This is because such liquid fuels can be introduced with gradual modifications to the existing infrastructure. The introduction of such fuels in a flex-fuel energy economy can be the first step to renewable production of methanol. This will effectively create a fuel for the future transport scenario which can reduce the amount of CO2 in the atmosphere. Very importantly, this cohesive approach permits a soft start and transition to a ‘synthetic alcohol energy economy’ for all of the major stakeholders in the transportation sector: customers, manufacturers and fuel suppliers.
Recommended Content
Authors
Topic
Citation
Turner, J., Peck, A., and Pearson, R., "Flex-Fuel Vehicle Development to Promote Synthetic Alcohols as the Basis of a Potential Negative-CO2 Energy Economy," SAE Technical Paper 2007-01-3618, 2007, https://doi.org/10.4271/2007-01-3618.Also In
References
- IPCC “Climate Change 2001: Mitigation. Contribution of Working Group III to the Third Assessment Report of the Intergovernmental Panel on Climate Change” Metz, B. Davidson, O. Swart, R. Pan, J. Cambridge University Press Cambridge, United Kingdom New York, NY, USA 2001 0521 80767 0
- Pearson, R.J. Turner, J.W.G. “Exploitation of Energy Resources and Future Automotive Fuels” SAE paper number 2007-01-0034 , SAE Fuels and Emissions Conference Cape Town, South Africa January 2007
- Amaseder, F. Krainz, G. “Liquid Hydrogen Storage Systems developed and manufactured for the first time for Customer Cars” SAE paper number 2006-01-0432 Detroit, Michigan, USA April 2006
- “The BMW Hydrogen 7 - A Production Car Using Hydrogen” AutoTechnology 6/2006 30 31 June 2006
- Jackson, N. “Low Carbon Vehicle Strategies - Options and Potential Benefits” Cost Effective Low Carbon Powertrains for Future Vehicles Conference Institution of Mechanical Engineers Combustion Engines and Fuels Group London 6th-7th November 2006
- Pearce, F. “Fuels Gold” New Scientist 23rd September 2006 36 41
- Hammerschlag, R. “Ethanol's Energy Return on Investment: A Survey of the Literature 1990-Present” Environmental Science & Technology 40 6 1744 1750 2006
- Olah, G.A. Goeppert, A. Prakash, G.K.S. “Beyond Oil and Gas: The Methanol Economy” Wiley-VCH Verlag GmbH & Co. KGaA Weinheim, Germany 2006 3-527-31275-7
- Owen, K. Coley, T. “Automotive Fuels Reference Book” Society of Automotive Engineers Warrendale, PA 1995 1560915897
- Bromberg, L. Cohn, D.R. Heywood, J.B. “Calculations of Knock Suppression in Highly Turbocharged Gasoline/Ethanol Engines using Direct Ethanol Injection” MIT report PSFC/JA-06-02 MIT Plasma Science and Fusion Centre 5th May 2006
- Turner, J.W.G. Pearson, R.J. Holland, B. Peck, R. “Alcohol-Based Fuels in High Performance Engines” SAE paper number 2007-01-0056 , SAE Fuels and Emissions Conference Cape Town, South Africa January 2007
- Turner, J.W.G. Pearson, R.J. Holland, B. Peck, A. “Development of a High-Performance Sports Car for Operation on a High Alcohol-Blend Fuel” JSAE paper number 20075038, JSAE Congress Yokohama, Japan May 2007
- Bergström, K. Melin, S.-A. Jones, C.C. “The New ECOTEC Turbo BioPower Engine from GM Powertrain - Utilizing the Power of Nature's resources” 28th International Vienna Motor Symposium Vienna 26th-27th April 2007
- Turner, J.W.G. Pearson, R.J. “High Output Supercharging without Intercooling: Theory and Results” paper number 01A5006, ATA High Performance Engines Seminar Stresa, Italy October 2001
- Brinkman, N.D. “Ethanol Fuel - A Single-Cylinder Engine Study of Efficiency and Exhaust Emissions” SAE paper number 810345 and SAE 1981 Transactions 90 1410 1424
- Nakata, K. Utsumi, S. Ota, A. Kawatake, K. Kawai, T. Tsunooka, T. “The Effect of Ethanol Fuel on a Spark Ignition Engine” SAE paper number 2006-01-3380 , SAE Powertrain & Fluid Systems Conference & Exhibition Toronto, Ontario, Canada October 2006
- Kapus, P.E. Fuerhapter, A. Fuchs, H. Fraidl, G.K. “Ethanol Direct Injection on Turbocharged SI Engines - Potential and Challenges” SAE paper number 2007-01-1408 , SAE 2007 World Congress Detroit, Michigan, USA April 2007
- Siewert, R.M. Groff, E.G. “Unassisted Cold Starts to -29°C and Steady-State Tests of a Direct Injection Stratified-Charge (DISC) Engine Operated on Neat Alcohols” SAE paper number 872066 1987
- Black, F. “An Overview of the Technical Implications of Methanol and Ethanol as Highway Motor Vehicle Fuels” SAE paper number 912413 and SAE 1991 Transactions 100 1161 1190 1991
- Brusstar, M. Stuhldreher, M. Swain, D. Pidgeon, W. “High Efficiency and Low Emissions from a Port-Injected Engine with Neat Alcohol Fuels” SAE paper number 2002-01-2743 , SAE Powertrain & Fluid Systems Conference & Exhibition San Diego, California, USA October 2002
- Brusstar, M. Bakenhus, M. “Economical, High Efficiency Engine Technologies for Alcohol Fuels” 15th Int. Symp. on Alt. Fuels San Diego, California, USA October 2005
- Bossel, U. Eliasson, B. Taylor, G. “The Future of the Hydrogen Economy: Bright or Bleak?” Cogeneration and Distributed Generation Journal 18 3 29 70 2003
- Wimmer, A. Gerbig, F. “Hydrogen Direct Injection - A Combustion Concept for the Future” AutoTechnology 1/2006 52 55 January 2006