This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Digital Human Modeling Requirements and Standardization
Technical Paper
2007-01-2498
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
This paper will initiate a discussion on automotive industry requirements and associated standardization of digital human modeling software (DHMS) as applied to manufacturing operations. Industry benefits of standardization are vast, making it difficult to identify and provide an exhaustive list. High value benefits will be listed for the purpose of this discussion. Industry users of DHMS will benefit by the standardization of an application programming interface, classification of anthropometry and simulation data translation. A list of high value standardization goals will be provided for the purpose of this discussion. Two examples of standardization goals include 1) a reduction in the time and cost required to integrate research results into commercial software and 2) improved simulation data transfer and linkages between DHMS to simplify the use of multiple tools when analyzing a single problem. This paper will provide an introduction to and proposal for standardization of DHMS. It will introduce the concept of a digital human modeling (DHM) architecture. It will also include a proposal on areas of standardization for future discussion.
Recommended Content
Topic
Citation
Wegner, D., Chiang, J., Kemmer, B., Lämkull, D. et al., "Digital Human Modeling Requirements and Standardization," SAE Technical Paper 2007-01-2498, 2007, https://doi.org/10.4271/2007-01-2498.Also In
References
- Abdel-Malek, K. Yang, J. Marler, T. Beck, S. Mathai, A. Zhou, X. Patrick, A. Arora, J. 2006 “Towards a New Generation of Virtual Humans,” International Journal of Human Factors Modelling and Simulation 1 1 2 39
- Bäckstrand, G. Högberg, D. De Vin, L.J. Case, K. Piamonte, P. 2006 Ergonomics Analysis in a Virtual Environment Proceedings of the International Manufacturing Conference, IMC 23 University of Ulster Jordanstown, Ireland 165 172
- Badler, N. 1997 Virtual Humans for Animation, Ergonomics, and Simulation IEEE 0-8186-8040-7/97
- Barone, S. Curcio, A. 2004 A computer-aided design-based system for posture analyses of motorcycles Journal Engineering of Design 15 581 595
- Blomé, M. Dukic, T. Hanson, L. Högberg, D. 2003 Simulation of Human-Car Interaction at Saab Automobile: Present and Future Proceedings of the 2003 SAE Digital Human Modeling for Design and Engineering Conference and Exposition Montreal, Canada SAE 2003-01-2192
- Chaffin, D.B. 2001 Digital Human Modeling for Vehicle and Workplace Design Warrendale, PA, USA Society of Automotive Engineers, Inc.
- Chaffin, D.B. Erig, M. 1991 Three-Dimensional Biomechanical Static Strength Prediction Model Sensitivity to Postural and Anthropometric Inaccuracies IIE Transactions 22 3 215 227
- Corlett, E.N. 1981 Pain, posture and performance Stress, Work Design and Productivity Corlett E.N. Richardsson, J. London, UK, Wiley 27 42
- Delleman, N.J. 1992 Visual determinants of working posture Computer Application in Ergonomics, Occupational Safety and healt Mattila, M. Karwowski, W. Elsevier Science Publishers
- Delleman, N.J. Dul, J. 2002 Sewing machine operation: workstation adjustment, working posture, and workers’ perceptions International Journal of Industrial Ergonomics 30 341 353
- Dukic, T. Rönnäng, M. Örtengren, R. Christmansson, M. Davidsson, A. 2002 Virtual Evaluation of Human Factors for Assembly Line work: A case study in an Automotive Industry Proceedings of the Digital Human Modeling Conference Munich, Germany
- Dukic, T. 2003 Applying computer manikins to evaluate the visual demnads in manual tasks Department of Product and Production Development. Chalmers University of Technology Gothenburg, Sweden
- Goutal, L. 2000 Ergonomics assessment for aircraft cockpit using the virtual mock-up Ergonomics Software Tools in Product and Workplace Design. A review of recent developments in human modeling and other design aids Landau, K. Stuttgart, Germany Verlag ERGON GmbH
- Gulz, A. Haake, M. 2005 Design of animated pedagogical agents-A look at their look International Journal of Human-Computer Studies 64 322 339 Elsevier, Ltd.
- Haslegrave, C.M. Li, G. Corlett, E.N. 1995 Factors affecting posture for machine sewing tasks Applied Ergonomics 26 35 46
- Laitila, L. 2005 Datormanikinprogram som verktyg vid arbetsplatsutformning - en kritisk studie av program-användning. Luleå tekniska Universitet Institutionen för arbetsvetenskap, avdelningen för industriell produktions-miljö 1402-1757
- Lämkull, D. 2005 The daily use of manikins within the manufacturing department at Volvo Car Corporation - working methodology, developments and wanted improvements Proceedings of the 37th Annual Conference of Nordic Ergonomics Society Oslo, Norway 86 90
- Lockett, J.F. Assmann, E. Green, R. Reed, M.P. Rascke, R. Verriest, J-P. 2005 Digital Human Modeling Research and Development User Needs Panel Proceedings of the 2005 SAE Digital Human Modeling for Design and Engineering Symposium June 14-16 Iowa City, Iowa, USA 2005-01-2745
- Neumann, W.P. Kazmierczak, K. 2005 Integrating Flow and Human Simulation to Predict Workload in Production Systems Proceedings of Nordic Ergonomics Society 37th Annual Conference Oslo, Norway 308 312
- Raschke, U. Kuhlmann, H. Hollick, M. 2005 On the Design of a Task Based Human Simulation System Proceedings of the 2005 SAE Digital Human Modeling for Design and Engineering Symposium Iowa City, Iowa, USA SAE 2005-01-2702
- Reed, M.P. Faraway, J. Chaffin, D.B. Bernard, J.M. 2006 The HUMOSIM Ergonomics Framework: A New Approach to Digital Human Simulation for Ergonomic Analysis Proceedings of the 2006 SAE Digital Human Modeling for Design and Engineering Symposium Lyon, France SAE 2006-01-2365
- Rix, J. Heidger, A. Helmstädter, C. Quester, R. Ringhof, T. 2000 Integration of the virtual human in CA design review Ergonomics Software Tools in Product and Workplace Design - A review of recent developments in human modeling and other design aids
- Landau, K. Stuttgart, Germany, ERGON GmbH 3-932160-11-8 183 194
- Rönnäng, M. Dukic, T. Örtengren, R. 2003 It's in the Eye of the Beholder: Who Should be the User of Computer Manikin Tools? Proceedings of the 2003 SAE Digital Human Modeling for Design and Engineering Conference and Exposition Montreal, Canada SAE 2003-01-2196
- Ruiter, I.A. 2001 Development of a checklist for the use of anthropometric Man Models Proceedings of the Digital Human Modeling for Design and Engineering Conference and Exposition Arlington, Virginia, USA SEA 2001-01-2116
- Sundin, A. Örtengren, R. 2006 Digital Human Modeling for CAE Applications Handbook of Human Factors and Ergonomics Salvendy, G. Hoboken, New Jersey, USA John Wiley & Sons 0-471-44917-2 1053 1078
- Sundin, A. Sjöberg, H. 2004 Datormanikiner och ergonomi i produkt- och produktionsutveckling Hur används manikiner i Sverige och vilken nytta kan de göra? Arbetslivsrapport nummer: 2004:19 1401-2928 Göteborg, Sverige 2003-01-2178
- Waller, O. Isnard, F. Dodds, G. 1998 Improving Human Interactions in Complex Product Development The Institution of Electrical Engineers. IEE Savoy Place, London WC2R 0BL, UK
- Ziolek, S. Nebel, K.J. 2003 Human Modelling: Controlling Misuse and Misinterpretation Proceedings of the 2003 SAE Digital Human Modeling for Design and Engineering Conference Montreal, Canada SAE 2003-01-2178
- Ziolek, S. Kruithof, P. 2000 Human modeling and simulation: a primer for practitioners Proceedings of IEA 2000/HFES 2000 Congress San Diego, USA 6 825 827