This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Analysis of Vehicle Chassis Transmissibility of Steering Shimmy and Brake Judder: Mechanism Study and Virtual Design of Experiment
Technical Paper
2007-01-2342
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The simulation model developed and validated by the authors [1] for vehicle chassis transmissibility of steering shimmy and brake judder is used to analyze the transmissibility mechanism and quantify the relative importance of system factors, through modal analysis around equilibrium point and a virtual DOE (design of experiment) process. Contributing chassis vibration modes are discovered, relative importance of chassis factors is efficiently determined, and potential areas for improving chassis shimmy/judder sensitivity are identified. The DOE results are further confirmed by the comparison of simulated and on-road measured shimmy/judder change with the specification change of key factors. Also presented is some successful application of the simulation technology and analysis results to vehicle development.
Recommended Content
Authors
Citation
Yu, J., Brickner, B., Nutwell, B., and Johnson, M., "Analysis of Vehicle Chassis Transmissibility of Steering Shimmy and Brake Judder: Mechanism Study and Virtual Design of Experiment," SAE Technical Paper 2007-01-2342, 2007, https://doi.org/10.4271/2007-01-2342.Also In
SAE 2007 Transactions Journal of Passenger Cars: Mechanical Systems
Number: V116-6; Published: 2008-08-15
Number: V116-6; Published: 2008-08-15
References
- Yu Jinghong Nutwell Brian Brickner Brian “Analysis of Vehicle Chassis Transmissibility of Steering Shimmy and Brake Judder: System Modeling and Validation” SAE 2007 Noise and Vibration Conference and Exhibition St. Charles, Illinois, USA May 14-17 2007
- Meltinger Thomas “Investigation of Shimmy with Multibody Simulation Methods” 5 th Stuttgart International Symposium on Automotive and Engine Technology Stuttgart, Germany February 18-20 2003
- Meyer Ralf “Brake Judder - Analysis of the Excitation and Transmission Mechanism within the Coupled System Brake, Chassis and Steering System” SAE technical paper 2005-01-3916
- Takegawa Takashige Ohhara Tsukasa Wakabayashi Yoshihiro “Brake Judder and Shimmy Simulation Technology Development” 18 th Symposium of International Association of Vehicle System Dynamics Kanagawa, Japan August 25-29 2003
- Kim Bong Soo Song Sang Heon Kim Jin Hong Park Kwan Hum “Vehicle Ride Comfort and Brake Judder Dynamics Analysis Considering Nonlinear Characteristics” SAE technical paper 2003-01-1614
- Ligonde Sylvain Farahmand Sassan “Nibble Sensitivity Correlation between Experimental Data and Virtual Prototyping Using ADAMS/Vibration” North American ADAMS User Conference Scottsdale, Arizona, U.S.A. May 19 2002
- Yu Jinghong “An Analysis of Fluid-Mechanically Coupled, Non-Linear Rotational Vibration Sensitivity of Automotive Hydraulic Power Steering Systems” International Mechanical Engineering Congress and Exposition Anaheim, California, U.S.A. November 2004
- Yu Jinghong Slattengren Jesper Motoyama Keiichi “Modeling and Factor Analysis of Hydraulic Power Steering Systems for Rotational Steering Vibration by Using MSC.ADAMS” MSC.Software Virtual Product Development Conference Huntington Beach, California, U.S.A. October 18-20 2004
- Yu Jinghong “CAE Analysis on Vehicle Chassis Transmissibility of Steering Shimmy and Brake Judder” Honda NVH and Control Symposium Tochigi, Japan November 1-2 2005