This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Gear Mesh Excitation Models for Assessing Gear Rattle and Gear Whine of Torque Transmission Systems with Planetary Gear Sets
Technical Paper
2007-01-2245
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
This paper presents four methodologies for modeling gear mesh excitations in simple and compound planetary gear sets. The gear mesh excitations use simplified representations of the gear mesh contact phenomenon so that they can be implemented in a numerically efficient manner. This allows the gear mesh excitations to be included in transmission system-level, multibody dynamic models for the assessment of operating noise and vibration levels. After presenting the four approaches, a description is made regarding how they have been implemented in software. Finally, example models are used to do a comparison between the methods
Recommended Content
Authors
Citation
Morgan, J., Dhulipudi, M., Yakoub, R., and Lewis, A., "Gear Mesh Excitation Models for Assessing Gear Rattle and Gear Whine of Torque Transmission Systems with Planetary Gear Sets," SAE Technical Paper 2007-01-2245, 2007, https://doi.org/10.4271/2007-01-2245.Also In
SAE 2007 Transactions Journal of Passenger Cars: Mechanical Systems
Number: V116-6; Published: 2008-08-15
Number: V116-6; Published: 2008-08-15
References
- Ariga, K. Abe, T. Yokoyama, Y. Enomoto, Y. 1992 Reduction of transaxle gear noise by gear train modification Society of Automotive Engineers , ( 922108 )
- Cai, Y. 1995 Simulation on the rotational vibration of helical gears in consideration of the tooth separation phenomenon (a new stiffness function of helical involute tooth pair) The ASME Journal of Mechanical Design 117 460 469
- Campbell, B. Steyer, W. S. G. Gagnon, M. C. N. 1997 Gear noise reduction of an automatic transmission through finite element dynamic simulation Society of Automotive Engineers , ( 971966 )
- Chung, C.-H. J. Steyer, G. C. Abe, T. Clapper, M. L. Shah, C. 1999 Gear noise reduction through transmission error control and gear blank dynamic tuning Society of Automotive Engineers , ( 1999-01-1766 )
- Craig, R. R. J. Bampton, M. C. C. 1968 Coupling of substructures for dynamic analyses AIAA Journal 7 1313 1319
- Donley, M. G. Lim, T. C. Steyer, G. C. 1992 Dynamic analysis of automotive gearing systems Society of Automotive Engineers , ( 920762 )
- Dooner, D. B. Seireg, A. A. 1995 The Kinematic Geometry of Gearing: A Concurrent Engineering Approach Wiley Interscience Publication 0-471-04597-7
- Dudley, D. W. 2002 Handbook of Practical Gear Design CRC Press 1-56676-218-9
- Gear Dynamics and Gear Noise Research Laboratory 2004 Load Distribution Program (LDP) The Ohio State University
- Houser, D. R. Bolze, V. M. Graber, J. M. 1996 A comparison of predicted and measured dynamic and static transmission error for spur and helical gear sets Proceedings of IMAC Dearborn, Michigan USA
- Houser, D. R. Oswald, F. B. Valco, M. J. Drago, R. J. Lenski, J. June 1994 Comparison of transmission error predictions with noise measurements for several spur and helical gears 30th AIAA/ASME/SAE/ASEE Joint Propulsion Conference Conference
- International Standard 1996 Calculation of Load Capacity of Spur and Helical Gears- Part 1: Basic principals, introduction and general influence factors
- Kahraman, A. 1994 Planetary gear train dynamics The ASME Journal of Mechanical Design 116 713 720
- Kahraman, A. Blankenship, G. W. 1994 Planet mesh phasing in epicyclic gear sets Proc. of International Gearing Conference 99 104
- Kahraman, A. Kharazi, A. A. Umrani, U. 2003 A deformable body dynamic analysis of planetary gears with thin rims Journal of Sound and Vibration 262 752 768
- Kanda, Y. Miyauchi, Y. F. Y. 2004 Experimental gears vibration analysis for reducing meshing force of automatic transmission Society of Automotive Engineers ,( 2004-01-1321 )
- Kim, T. C. Singh, R. 2001 Dynamic interaction between loaded and unloaded gear pairs under rattle conditions Society of Automotive Engineers , ( 2001-01-1553 )
- Krishnaswami, R. Defore, M. R. Hildebrand, D. H. Metcalf, J. P. Sell, D. J. 2001 Gear whine improvements for an automatic transmission through design retargeting and manufacturing variability reduction Society of Automotive Engineers , ( 2001-01-1505 )
- Krishnaswami, R. Kaatz, S. D. Hildebrand, D. H. Hiatt, J. P. Phelan, P. E. 2001 Gear whine reduction for a new automatic transmission Society of Automotive Engineers , ( 2001-01-1506 )
- Litvin, F. L. Fuentes, A. 2004 Gear Geometry and Applied Theory Cambridge 0-521-81517-7
- LMS DADS 2003 DADS 9.6 User Manual LMS International Leuven, Belgium
- Özgüven, H. N. Houser, D. R. 1988 Dynamic analysis of high speed gears by using loaded static transmission error Journal of Sound and Vibration 125 1 71 83
- Padmanabhan, C. Barlow, R. C. Rook, T. Singh, R. March 1995 Computational issues associated with gear rattle analysis ASME Journal of Mechanical Design 117 185 192
- Parker, R. G. 2000 A physical explanation for the effectivness of planet phasing to suppress planetary gear vibration Journal of Sound and Vibration 236 4 561 573
- Pierz, M. P. 2001 Development of a precision variable load transmission error test device Society of Automotive Engineers , ( 2001-01-1491 )
- Shabana, A. 1998 Dynamics of Multibody Systems Cambridge University Press second 0-521-59446-4
- Tanna, R. P. Lim, T. C. 2003 A parameteric study on the vibration transmissibility characterisitcs of transmission ring gear structure Society of Automotive Engineers , ( 2001-01-1660 )
- Umezawa, K. 1974 The meshing test on helical gears under load transmission (3rd report: The static behaviours of driven gear) Bulletin of Janpanese Society of Mechanical Engineers 17 112 1348 1355
- Umezawa, K. Suzuki, T. Houjou, H. Sato, T. 1986 Vibration of power tranmsission helical gears (approximate equation of tooth stiffness) Bulletin of Janpanese Society of Mechanical Engineers 29 251 1605 1611
- Vijayakar, S. 1991 A combined surface integral and finite element solution for a three-dimensional contact problem International Journal for Numerical Methods in Engineering 31 525 545
- Vinayak, H. Houser, D. R. 1992 A comparison of analytical predictions with experimental measurements of transmission error of misaligned loaded gears ASME International Power Transmission and Gearing Conference 1 11 18
- Yakoub, R. Y. Corrado, M. Forceilli, A. Pappalardo, T. Dutre, S. 2004 Prediction of system-level gear rattle using the multibody and vibro-acoustic techniques Society of Automotive Engineers , ( 2004-32-0063 )