This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Measurement of Diesel Spray Impingement and Fuel Film Characteristics Using Refractive Index Matching Method
Technical Paper
2007-01-0485
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The fuel film thickness resulting from diesel fuel spray impingement was measured in a chamber at conditions representative of early injection timings used for low temperature diesel combustion. The adhered fuel volume and the radial distribution of the film thickness are presented. Fuel was injected normal to the impingement surface at ambient temperatures of 353 K, 426 K and 500 K, with densities of 10 kg/m3 and 25 kg/m3. Two injectors, with nozzle diameters of 100 μm and 120 μm, were investigated. The results show that the fuel film volume was strongly affected by the ambient temperature, but was minimally affected by the ambient density. The peak fuel film thickness and the film radius were found to increase with decreased temperature. The fuel film was found to be circular in shape, with an inner region of nearly constant thickness. The major difference observed with temperature was a decrease in the radial extent of the film. The injector nozzle diameter was not found to have a significant effect.
Recommended Content
Technical Paper | Diesel Injector Deposits Potential in Future Fueling Systems |
Technical Paper | Dual Fuel Combustion of Propane in a Railroad Diesel Engine |
Technical Paper | Comparison of Direct Injection Gasoline Combustion Systems |
Citation
Yang, B. and Ghandhi, J., "Measurement of Diesel Spray Impingement and Fuel Film Characteristics Using Refractive Index Matching Method," SAE Technical Paper 2007-01-0485, 2007, https://doi.org/10.4271/2007-01-0485.Also In
References
- Naber, J.D. Siebers, D. L. Effects of gas density and vaporization on penetration and dispersion of diesel sprays SAE Technical Paper 960034 1996
- Siebers, D. L. Scaling liquid-phase fuel penetration in diesel sprays based on mixing-limited vaporization SAE Technical Paper 1999-01-0528 1999
- Siebers, D. L. Liquid-phase fuel penetration in diesel sprays SAE Technical Paper 980809 1998
- Borthwick, R.P. Farrell, P.V. Fuel injection spray and combustion chamber wall impingement in large bore diesel engines SAE Technical Paper 2002-01-0496 2002
- Ko, K. Arai, M. Diesel spray impinging on a flat wall, part I: characteristics of adhered fuel film in an impingement diesel spray Atomization and Sprays 12 737 751 2002
- Ko, K. Arai, M. Diesel spray impinging on a flat wall, part II: volume and average air-fuel ratio of an impingement diesel spray Atomization and Sprays 12 753 768 2002
- Katsura, N. Saito, M. Senda, J. Fujimoto, H. Characteristics of a diesel spray impinging on a flat wall SAE Technical Paper , 890264 191 207 1989
- Mathews, W.S. Lee, C.F. Peters, J.E. Experimental investigations of spray/wall impingement Atomization and Sprays 13 223 242 2003
- Ko, K. Arai, M. Diesel spray and adhering fuel on an impingement wall SAE Technical Paper 2002-01-1628 2002
- Lippert, A. M. Stanton, D.W. Reitz, R. Rutland, C. Hallett, W.L.H. Investigating the effect of spray targeting and impingement on diesel engine cold start SAE technical paper series 2000-01-0269 2000
- Saito, A. Kawamura, K. Behavior of fuel film on a wall at fuel spray impinging ICLASS-97 54 61 1997
- Drake, M.C. Fansler, T.D. Solomon, A.S. Szekely, G.A. Piston fuel films as a source of smoke and hydrocarbon emissions from a wall-controlled spark-ignited direct-injection engine SAE Technical Paper , 2003-01-0547 2003
- Drake, M.C. Fansler, T.D. Rosalik, M.E. Quantitative high-speed imaging of piston fuel films in direct-injection engines using a refractive-index- matching technique, ILASS-02 15th Annual Conference on Liquid Atomization and Spray Systems Madison, WI May 2002
- Park, S. Ghandhi, J.B. Fuel Film Temperature and Thickness Measurements on the Piston Crown of a Direct-Injection, Spark-Ignition Engine SAE Technical Paper Series , 2005-01-0649 2005
- Lin, M-T Sick, V. Is toluene a suitable LIF tracer for fuel film measurements? SAE Technical Paper Series , 2004-01-1355 2004
- Bower, G.R. Foster, D.E. A comparison of the Bosch and Zuech rate of injection meters SAE Technical Paper Series , 910724 1991
- Bosch, W. The fuel rate injector: a new measuring instrument for display of the characteristics of individual injection SAE Technical Paper Series , 660749 1966
- Dombrovsky, L.A. Sazhin, S.S. Mikhalovsky, S.V. Wood, R. heikal, M.R. Spectral properties of diesel fuel droplets, Fuel 82 2003 15 22
- Plstlllo, W.R. Groote, C.L.C.D. Cloud point depressant response effects in ultra-low sulfur diesel fuel SAE Technical Paper Series , 2005-01-3898