This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Homogeneous Diesel Combustion with External Mixture Formation by a Cool Flame Vaporizer
Technical Paper
2006-01-3323
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The homogeneous Diesel combustion is a way to effect a soot and nitrogen oxide (NOx) free Diesel engine operation. Using direct injection of Diesel fuel, the mixture typically ignites before it is fully homogenized. In this study a homogeneous mixture is prepared outside of the combustion chamber by a Cool Flame Vaporizer. At first the specification of the vaporizer is given in this paper. To determine the composition of the vaporizer gas an analysis using gas chromatography/mass spectroscopy (GC/MS) was made. The results give an idea of the effects on engine combustion. Followed by, the vaporizer was adapted to a single-cylinder Diesel engine. To adapt the engine's configuration regarding compression ratio and inlet temperature range a zero dimensional engine process simulation software was utilized. The engine was run in different operating modes. The test results with external mixture formation were compared with two low temperature Diesel combustion strategies based on direct fuel injection: the Premixed Charge Compression Ignition (PCCI) and the Late Low Temperature Combustion (LLTC).
Recommended Content
Authors
Topic
Citation
Puschmann, H., Buchwald, R., Pannwitz, M., Sommer, A. et al., "Homogeneous Diesel Combustion with External Mixture Formation by a Cool Flame Vaporizer," SAE Technical Paper 2006-01-3323, 2006, https://doi.org/10.4271/2006-01-3323.Also In
References
- Thring, R. H. Homogeneous-Charge Compression-Ignition (HCCI) Engines SAE 892068
- Ryan, T. W. III Callahan, T. J. Homogeneous Charge Compression Ignition of Diesel Fuel SAE 961160
- Nakagome, K. Shimazaki, N Niimura, K. Kobayashi, S. Combustion and Emission Characteristics of Premixed Lean Diesel Combustion Engine SAE 970898
- Gray, Allen W. III Ryan, Thomas W. III Homogeneous Charge Compression Ignition (HCCI) of Diesel Fuel SAE 971676
- Stanglmaier, Rudolf H. Roberts, Charles E. Homogeneous Charge Compression Ignition (HCCI): Benefits, Compromises, and Future Engine Applikations SAE 1999-01-3682
- Yanagihara, H. Ignition Timing Control at Toyota “UNIBUS” Combustion System. A New Generation of Engine Combustion Processes for the Future? IFP International Congress Paris 2001
- Christensen, Magnus Johansson, Bengt Hultqvist, Anders The Effect of Combustion Chamber Geometry on HCCI Operation SAE 2002-01-0425
- Hasegawa, Roy Yanagihara, Hiromichi HCCI Combustion in a DI Diesel Engine SAE 2003-01-0745
- Buchwald, R. et al. Adaption of Injection System Parameters to Homogeneous Diesel Combustion SAE 2004-01-0936
- Pinchon, P. Walter, B. Réveillé, B. Miche, M. New concepts for diesel combustion Thiesel 2004
- Duret, P. et al. Progress in Diesel HCCI Combustion Within the European SPACE LIGHT Project SAE 2004-01-1904
- Stein, J. Dürnholz, M. Wirbeleit, F. Kopp, C. Benz, C. Homogene dieselmotorische Verbrennung zur Darstellung niedrigster Emissionen (Homogeneous diesel engine combustion for achieving minimum emissions) 13th Aachen Colloquium on Vehicle and Engine Technology 2004
- Steinbach, N. Lucka, K. Köhne, H. Vormischtechniken für flüssige Brennstoffe Verdampfung mittels Kalter Flammen; Wärmetechnik-Versorgungstechnik Wärmetechnik-Versorgungstechnik 45 3 2000 34 38 Gentner Verlag, Stuttgart 1436-5197
- Kahrstedt, J. Blechstein, A. Maiwald O. Kabitzke J. Grundlegende Untersuchungen zu Low-NO x -Brennverfahren für Pkw-Dieselmotoren unter Nutzung zusätzlicher Variabilitäten 6th International Stuttgart Symposium, Automotive Engineering and Combustion Engines 2005
- Mengel, C. Lucka, K. Köhne, H. Auslegungskriterien für die Gemischbildung flüssiger Brennstoffe durch Kalte Flammen 4. Aachener Kolloquium - Heizwärme aus Ölverbrennung Aachen Shaker Verlag 2003 3-8322-1864-5
- Mengel, C. Untersuchung zur Stabilität der Gemischbildung flüssiger Brennstoffe mit Luft unter den Bedingungen druckaufgeladener Brennstoffzellen-prozesse RWTH 2003 3-8322-2636-2
- Predelli, O. Kracke, T. Schmidt, W. Meyer, S. FI2RE, Neues Steuermodul für Piezoinjektoren (FI2RE, New control module for piezo injectors) In MTZ 65 2004 1 36 42
- Kahrstedt, J. Buschmann, G. Predelli, O. Kirsten, K. Homogeneous Diesel combustion process for EURO5 and TIER2/LEV2 - Realizing modified process control using innovative hardware and control concepts Vienna Engine Symposium 2004
- Fieweger, Klaus Selbstzündung von Kohlenwasserstoff/Luft-Gemischen unter motorischen Randbedingungen Shaker Verlag 1996 3-8265-1869-1