This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Modelling of a Turbocharged SI Engine with Variable Camshaft Timing for Engine Control Purposes
Technical Paper
2006-01-3264
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
In the whole engine development process, 0D/1D simulation has become a powerful tool, from conception to final calibration. Within the context of control strategy design, a turbocharged spark ignition (SI) engine with variable camshaft timing has been modelled on the AMESim platform. This paper presents the different models and the methodology used to design, calibrate and validate the simulator. The validated engine model is then used for engine control purposes related to downsizing concept. Indeed, the presented control strategy acts on the in-cylinder trapped mass, the in-cylinder burnt gas fraction and the air scavenging from the intake to the exhaust. Consequently, it permits to reduce not only the fuel consumption and pollutant emissions but also to improve the transient response of the turbocharger
Recommended Content
Authors
- F. Le Berr - IFP
- M. Miche - IFP
- G. Le Solliec - IFP
- F-A. Lafossas - IFP
- G. Colin - LME
Topic
Citation
Le Berr, F., Miche, M., Le Solliec, G., Lafossas, F. et al., "Modelling of a Turbocharged SI Engine with Variable Camshaft Timing for Engine Control Purposes," SAE Technical Paper 2006-01-3264, 2006, https://doi.org/10.4271/2006-01-3264.Also In
References
- http://www.amesim.com IMAGINE
- Kamopp D.C. Margolis D.L. Rosenberg R.C. “Systems Dynamics: a Unified Approach” John Wiley & Sons New York, USA 1990
- Menegazzi Pascal Aubret Philippe Vernhes Pierre-Louis “Conventional and Hybrid Vehicle Emission, Fuel Economy and Performance Analysis System Simulation” FISITA 2004 23-27 May Barcelona, Spain
- Lafossas F-A. Colin O. Le Berr F. Menegazzi P. “Application of a new 1D combustion model to gasoline transient engine operation” SAE 2005 Fuels and Lubricants Meeting Exhibition and Congress May 11-13 2005 Rio de Janeiro, Brazil SAE 2005-01-2107
- Lecointe B. Monnier G. “Downsizing of Gasoline Engine Using Turbocharging and Direct Injection” SAE Technical paper 2003-01-0542
- Leduc P. Dubar P. Ranini A. Monnier G. “Downsizing of Gasoline Engine: an Efficient Way to Reduce CO2 Emissions” Oil & Gas Sc. Tech. Journal 58 2003
- Woschni G. “Universally Applicable Equation for the Instantaneous Heat Transfer Coefficient in the Internal Combustion Engine” SAE paper 670931 , SAE Trans 76 1967
- Heywood J.B. “Internal Combustion Engine Fundamentals” McGraw Hill 1988
- Colin O. Benkenida A. “The 3-Zones Extended Coherent Flame Model (ECFM3Z) for computing premixed diffusion combustion” Combust. Sci. and Tech.
- Colin, O. Benkenida, A. Angelberger, C. “A 3D Modeling of Mixing, Ignition and Combustion Phenomena in Highly Stratified Gasoline Engines” Oil and Gas Science and Technology 58 47 62 2003
- Zolver M. Klahr D. Bohbot J. Laget O. Torres A. “Reactive CFD in Engines with a New Unstructured Parallel Solver. Oil & Gas Science and Technology” 58 1 33 46 2003
- Bohbot J. Klahr D. Zolver M. Torres A. “A Three Dimensional Modelling of Combustion in a Direct Injection Diesel Engine using a New Unstructured Parallel Solver” The 2003 International Conference on Computational Science and its Applications, ICCSA May 2003 Montréal, Canada 483 492
- Zolver M. Bohbot J. Klahr D. Torres A. “An Unstructured Parallel Solver for Multi-phase and Reactive Flows in Internal Combustion Engines” Parallel CFD 2003 Mai 2003 Moscow
- Metghalchi M. Keck J.C. “Burning Velocities of Mixtures of Air with Methanol, iso-octane and indolene at High Pressure and Temperature” Combust. Flame 48 191 210 1982
- Bohbot J. Lafossas F-A. Albrecht A. Miche M. Chraibi M. Menegazzi P. “A new coupling approach using a 1D system simulation software and a 3D combustion code applied to transient engine operation” SAE 2004 Powertrain and Fluid System Conference and Exhibition October 25-28 2004 Tampa, Florida, USA SAE 2004-01-3002
- Albrecht A. Corde G. Knop V. Boie H. Castagne M. “Turbocharged Gasoline Direct Injection Engine 1D Simulation for Transient Strategy Optimization” SAE 2005 World Congress April 11-14 2005 Detroit, MI, USA SAE 2005-01-0693
- Colin G. Chamaillard Y. Bloch G. Charlet A. Corde G. “Turbocharged SI engine control - A neural network approach” Journées Automatique et Automobile Bordeaux 2005
- Nelles, O. “Nonlinear System Identification” Springer 2001
- Nørgaard, M Ravn O. Poulsen N.K. Hansen L.K. “Neural Networks for Modelling and Control of Dynamic Systems” Springer 2000
- Corde, G. “Le contrôle moteur” Contrôlecommande de la voiture Gissinger G. Le Fort-Piat N. Hermès, Paris