This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Fundamental Study on Thermal Behavior of Brake Discs
Technical Paper
2006-01-3203
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
We describe our practical procedure of designing thermally robust brake discs using conventional CAE. First, we review the literature describing brake judder, measurement technologies, and CAE focusing on brake discs. Second, we present some experimental results confirming what effect the basic configurations of brake discs have on thermal behaviors and the correlation between CAE simulation and physical test results. Finally, we propose a design strategy for developing thermally stable brake discs with an outer-hat configuration. We carried out a series of CAE experiments based on the Taguchi Method and determined the critical parameters for reducing the amount of coning. We also present some simplified models using classical theory regarding the strength of materials to discuss what effect the dimensional parameters have on the discs' thermal deformation.
Recommended Content
Citation
Okamura, T. and Yumoto, H., "Fundamental Study on Thermal Behavior of Brake Discs," SAE Technical Paper 2006-01-3203, 2006, https://doi.org/10.4271/2006-01-3203.Also In
SAE 2006 Transactions Journal of Passenger Cars: Mechanical Systems
Number: V115-6; Published: 2007-03-30
Number: V115-6; Published: 2007-03-30
References
- Okamura, Toshikazu Hasegawa Kiyoshi Herai Junji “High-Precision Brake Discs to Reduce Judder” SAE 2005-01-3924
- Liu, Weiming Pfeifer Jerome L. “Introduction to Brake Noise & Vibration” 2002 SAE Annual Brake Colloquium & Exhibition Tutorial
- Leslie, Andrew C. “Mathematical Model of Brake Caliper to Determine Brake Torque Variation Associated with Disc Thickness Variation (DTV) Input” SAE 2004-01-2777
- Tamasho, Tadashi Doi Kazuhiro Hamabe Tsutomu Koshimizu Naganori Suzuki Shinji “Technique for Reducing Drag Torque of Brakes in the Non-braking Mode” JSAE 9839425 (in Japanese)
- Fieldhouse, John D. Beveridge Carl “Experimental Observations of Hot Judder” SAE 2001-01-3135
- Stringham, Walter Jank Peter Pfeifer Jerry Wang Alex “Brake Roughness - Disc Brake Torque Variation, Rotor Distortion and Vehicle Response” SAE 930803
- Nakai, Koji Saito Noriyuki Nobata Yasuhiro “Development of a Disc for Reducing Brake Judder” JSAE 20045660 (in Japanese)
- Kubota, Masahiro Suenaga Tomihiro Doi Kazuhiro “A Study of the Mechanism Causing High-Speed Brake Judder” SAE 980594
- Little, Edward J. Kao Tseng-Kuan Ferdani Philip Hodges Timothy “A Dynamometer Investigation of Thermal Judder” SAE 982252
- Swartzfager, Dennis G. Seingo Roger Parker Euan “Relationship of the Transfer Film Formed under Low Pressure Drag Conditions and Torque Variation” SAE 982255
- Gonzalez, Manuel Cañibano Esteban Díez Raúl “Comparative Analysis of Vented Brake Discs in Groan Noise Test on Dynamometer” SAE 2004-01-2789
- Eisengräber, Reinhard Grochowicz Jaroslaw Schuster Matthias Augsburg Klaus Koch Lars “Comparison of Different Methods for the Determination of the Friction Temperature of Disc Brakes” SAE 1999-01-0138
- Hartsock, Dale Fash James Dalka Tom Smith Greg Yi Yun-Bo Hecht Rena Dinwiddie Ralph “High Speed Infrared Temperature Mapping of a Rotating Target (Automotive Brake Rotor)” http://www.ntrc.gov/pdfs/showcase020506/DaleHartsock.pdf
- Barigozzi, Giovanna Cossali Gianpietro E. Perdichizzi Antonio Lorenzo Silvio Pacchiana Paolo “Experimental Investigation of the Aero-Thermal Characteristics at the Exit of an Automotive Vented Brake Disc” SAE 2003-01-3338
- Barigozzi, Giovanna Perdichizzi Antonio Pacchiana Paolo Goller Ralf “Aero-Thermal Characteristics of an Automotive CCM Vented Brake Disc”
- Valvano, Thomas Lee Kwangjin “An Analytical Method to Predict Thermal Distortion of a Brake Rotor” SAE 2000-01-0445
- Jerhamre, Anders Bergstrom C. “Numerical Study of Brake Disc Cooling Accounting for Both Aerodynamic Drag Force and Cooling Efficiency” SAE 2001-01-0948
- Shen, Fred Z. Mukutmoni Devadatta Thorington Kurt Whaite John “Computational Flow Analysis of Brake Cooling” SAE 971039
- Zhang, Jian J. “A High Aerodynamic Performance Brake Rotor Design Method for Improved Brake Cooling” SAE 973016
- Damodaran, Vijay Cherukuru Radhika Jayasundera Ajith M. “CFD-Based Lumped Parameter Method to Predict the Thermal Performance of Brake Rotors in Vehicle” SAE 2003-01-0601
- Sun, Hongguang “Sensitivity Study on Brake Cooling Performance” SAE 2006-01-0694
- Sakamoto, Shigeru Shimizu Hidetoshi Shimazu Takashi Katagiri Haruo Shinoda Toru “Development of High Cooling Performance A New Brake Rotor” TOYOTA Technical Review (in Japanese) 44 1 90 95 May 1994
- Shimazu, Takashi Katagiri Haruo Sakamoto Shigeru Shimizu Hidetoshi Shinoda Toru “Development of a New Brake Rotor with Improved Cooling Capacity” JSAE 9435496 (in Japanese)
- Kondyles, Dino Nick Phan David “Rotor Design and Analysis; a Technique Using Computational Fluid Dynamics (CFD) and Heat Transfer Analysis” SAE 2003-01-3303
- Huang, Yuan Mao Chen Shi-Han “Analytical Study of Design Parameters on Cooling Performance of a Brake Disk” SAE 2006-01-0692
- Gibbens, Peter Kerslake “Cast Brake Disc” World Intellectual Property Organization
- Yumoto, Hiroyuki Okamura Toshikazu “Integrated Brake Disc Design System” SAE 2006-01-0693
- Stuart, Birch “Continental Flying Spur” Automotive Engineering International 113 8 48 51 August 2005
- Fukano, Akira Matsui Hiromichi “Development of Disc-Brake Design Method Using Computer Simulation of Heat Phenomena” SAE 860634
- Brecht, Jorg Egner-Walter Achim “Influence of Material Selection on Stresses in Ventilated Brake Discs” SAE 980595
- Eppler, Steffen Klenk Thomas Wiedemann Jochen “Thermal Simulation within the Brake System Design Process” SAE 2002-01-2587