This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
A Novel Approach for Brake Squeal Control Using Shunted Piezoceramics
Technical Paper
2006-01-3198
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Despite significant efforts, the phenomenon of brake squeal still remains unpredictable. Recently, piezoelectric shunt damping is proposed as an alternative approach to suppress squealing. It features a piezoceramics which is embedded into the brake model. At the electrodes an electrical network is connected with the aim to generate a dynamical behavior of the piezoceramics which counteracts the mechanical vibration.
In this paper, resonant networks featuring a negative capacitance and a switching shunt are discussed separately. An electromechanical multibody system of the brake with shunted piezoceramic is presented and stability analyses are carried out. The results are verified on a test rig with a modified brake prototype.
Recommended Content
Technical Paper | A Systematic Approach to Preparing Drive Files for Squeak and Rattle Evaluations of Subsystems or Components |
Technical Paper | Improving SEA Predictions with Experimental Data |
Technical Paper | Acoustical Analysis of Composite Materials |
Authors
Topic
Citation
Neubauer, M., Niederberger, D., and Morari, M., "A Novel Approach for Brake Squeal Control Using Shunted Piezoceramics," SAE Technical Paper 2006-01-3198, 2006, https://doi.org/10.4271/2006-01-3198.Also In
References
- Rudolph, M. Popp, K. “Brake Squeal” Detection, Utilization and Avoidance of Nonlinear Dynamical Effects in Engineering Applications 197 225 2001
- von Wagner, U. Hochlenert, D. Jearsiripongkul, T. Hagedorn, P. „Active control of brake squeal via, smart pads' Transactions Journal of Passenger Cars - Mechanical Systems SAE International Troy, USA 1186 1192 2005
- Neubauer, M. Oleskiewicz, R. “Brake Squeal Suppression with shunted Piezoceramics - A Control Formalism” Mechatronics 2006 Heidelberg
- Tang J. Wang, K. W. „Active-passive hybrid piezoelectric networks for vibration control: comparisons and improvement” Smart Materials and Structures 10 794 806 2001
- Neubauer, M. Oleskiewicz, R. Popp, K. Krzyzynski, T. “Optimization of damping and absorbing performance of shunted piezoelements utilizing negative capacitance” Journal of Sound and Vibration
- Hollkamp, J. J. “Multimodal passive vibration a suppression with piezoelectric materials and resonant shunts” Journal of Intelligent Materials and Systems and Structures 5 49 57 1994
- Niederberger, D. Fleming, A. Moheimani, S.O.R. Morari, M. “Adaptive Multi-mode Resonant Piezoelectric Shunt Damping” Journal of Smart Materials and Structures 13 1025 1035 Sept. 2004
- Neubauer, M. Oleskiewicz, R. “Suppression of Brake Squeal Using Shunted Piezoceramics” ASME Conference on Engineering Systems Design and Analysis Turin 2006 0-7918-3779-3
- Hagedorn, P. “Modeling disk brakes with respect to squeal” COBEM 2003
- Corr, L. R. Clark, W. W. “Comparison of Low Frequency Piezoceramic Switching Shunt Techniques for Structural Damping” Smart Materials and Structures 11 370 376 2002
- Niederberger, D. “Smart damping materials using shunt control” Swiss Federal Institute of Technology Zurich 2005
- Oleskiewicz, R. Neubauer, M. Krzyzynski, T. “Vibration Control with Shunted Piezoceramics - The Energy Balance” Mechatronics 2006 Heidelberg
- Oleskiewicz, R. Neubauer, M. Krzyzynski, T. “Losses in Negative Capacitance Circuit for Piezo Vibration Control” GAMM 2006 conference Berlin
- Niederberger, D. Morari, M. “An autonomous shunt circuit for vibration damping” Smart Materials and Structures 15 359 364 2006