This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
An Automated Average-Value Modeling Methodology for Power Electronic Sources and Loads
Technical Paper
2006-01-3036
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Event:
Power Systems Conference
Language:
English
Abstract
In this paper, an automated averaging modeling methodology is set forth applicable to power electronic converters of arbitrary complexity. The user-defined inputs consist of a circuit description similar to the SPICE netlist (network graph and branch parameters), whereupon the input/output impedance-versus-frequency characteristics are automatically and rapidly generated. In addition to eliminating the need for the analytical derivation of average-value models, this methodology readily permits the inclusion of secondary effects such as conduction losses, switching losses, and magnetic nonlinearities, to name a few. This methodology has been successfully applied to characterize the impedance of a one-quadrant dc/dc buck converter, a three-phase diode rectifier source with three different modes of operation, and a space-vector-modulated dc/ac inverter.
Authors
Citation
Wu, N., Wasynczuk, O., and Lamm, P., "An Automated Average-Value Modeling Methodology for Power Electronic Sources and Loads," SAE Technical Paper 2006-01-3036, 2006, https://doi.org/10.4271/2006-01-3036.Also In
References
- Middlebrook R. D. “Input filter considerations in design and application of switching regulators,” IEEE Industry Applications Society Annual Meeting Chicago 1976
- Sudhoff S. D. Glover S. F. Lamm P. T. Schmucker D. H. Delisle D. E. “Admittance space stability analysis of power electronic systems,” IEEE Transactions on Aerospace and Electronic Systems 36 965 973 2000
- Middlebrook R. D. Cuk S. “A general unified approach to modeling switching-converter power stages,” IEEE Power Electronics Specialist Conference Record 18 34 1976
- Sun J. Mitchell D. M. Greuel M. F. Krein P. T. Bass R. M. “Averaged modeling of PWM converters operating in discontinuous conduction mode,” IEEE Transactions on Power Electronics 16 482 492 2001
- Witulski A. F. Erickson R. W. “Extension of state-space averaging to resonant switches and beyond,” IEEE Transactions on Power Electronics 5 98 109 1990
- Sudhoff S. D. Corzine K. A. Hegner H. J. Delisle D. E. “Transient and dynamic average-value modeling of synchronous machine fed load-commutated converters,” IEEE Transactions on Energy Conversion 11 508 514 1996
- Alt J. T. Sudhoff S. D. Ladd B. E. “Analysis and average-value modeling of an inductorless synchronous machine load commutated converter system,” IEEE Transactions on Energy Conversion 14 37 43 1999
- Jatskevich J. Aboul-Seoud T. “Impedance characterization of a six-phase synchronous generator-rectifier system using average-value model,” 2004 Canadian Conference on Electrical and Computer Engineering 2004
- Davoudi A. Jatskevich J. V. DeRybel T. “Numerical Average Value Modeling of PWM DC-DC Converters.”
- Verghese G. C. Elbuluk M. E. Kassakian J. G. “A General Approach to Sampled-Data Modeling for Power Electronic Circuits,” IEEE Transactions on Power Electronics PE-1 76 89 1986
- Rajasekaran V. Sun J. Heck B. S. “Bilinear discrete-time modeling for enhanced stability prediction and digital control design,” IEEE Transactions on Power Electronics 18 381 389 2003
- Chua O. Lin P. M. Computer-aided analysis of electronic circuits: algorithms and computational techniques Englewood Cliffs, N.J. Prentice-Hall 1975
- Gautschi W. Numerical Analysis, An Introduction Birkhauser Boston 1997
- Jatskevich J. Wasynczuk O. Pekarek S. D. Walters E. A. Lucas C. E. Lamm P. T. “Automated Identification of Operational Modes of Switched Electrical Circuits,” SAE Transactions, Journal of Aerospace 1 3 955 961 2000
- Wu N. “Simulation-Based Average-Value Modeling of Power Electronic Converters and Subsystems,” School of Electrical and Computer Engineering West Lafayette Purdue University 2006
- “Simulink: simulation and model-based design,” Using Simulink Version 6 The MathWorks Inc. 2005
- “Advanced Continuous Simulation Language (ACSL),” Reference Manual, Version 11 MGA Software 1995
- Pekarek S. Glover S. Tichenor J. Wooldridge J. Koenig A. Brouwer S. Beccue P. Sudhoff S. Kuhn B. Aliprantis D. Byoun J. Kwon C. Wang H. Sauer J. D. Aston B. Ciezki J. Delisle D. E. “Development of a Testbed for Design and Evaluation of Power Electronic-Based Systems,” SAE2002 Power Systems Conference Coral Springs, Florida 2002
- “LTI Viewer,” Control System Toolbox (for Use with Matlab) User's Guide Version 6 The MathWorks Inc. 2005
- Witzke R. L. Kresser J. V. Dillard J. K. “Influence of A-C reactance on voltage regulation of 6-phase rectifiers,” American Institute of Electrical Engineers - Transactions - Communications and Electronics 72 244 252 1953
- Wasynczuk O. Sudhoff S. D. “Automated state model generation algorithm for power circuits and systems,” IEEE Transactions on Power Systems 11 1951 1956 1996
- Pekarek S. D. Wasynczuk O. Walters E. A. Jatskevich J. V. Lucas C. E. Wu N. Lamm P. T. “An efficient multirate Simulation technique for power-electronic-based systems,” IEEE Transactions on Power Systems 19 399 409 2004
- Krause P. C. Wasynczuk O. Sudhoff S. D. Analysis of Electric Machinery and Drive Systems IEEE Press, Wiley 2002