This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Morphing Upper Torso: A Novel Concept in EVA Suit Design
Technical Paper
2006-01-2142
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The University of Maryland Space Systems Laboratory and ILC Dover LP have developed a novel concept: a soft pressure garment that can be dynamically reconfigured to tailor its shape properties to the wearer and the desired task set. This underlying concept has been applied to the upper torso of a rear entry suit, in which the helmet ring, waist ring and two shoulder rings make up a system of four interconnected parallel manipulators with tensile links. This configuration allows the dynamic control of both the position and orientation of each of the four rings, enabling modification of critical sizing dimensions such as the inter-scye distance, as well as task-specific orientations such as helmet, scye and waist bearing angles.
Half-scale and full-scale experimental models as well as an analytical inverse kinematics model were used to examine the interconnectedness of the plates, the role of external forces generated by pressurized fabric, and the controllability of the system. The kinematics of the system were investigated, and tensile forces in the links were quantified to determine actuator requirements. A third experimental model was developed to eliminate material effects and thereby quantify the loads born by the pressure garment, thus allowing further understanding of the behavior of this highly complex system. This lightweight, resizable, dynamically reconfigurable suit certainly makes the MUT concept appealing as a candidate for a next generation planetary exploration suit.
Authors
Citation
Jacobs, S., Akin, D., Braden, J., and Graziosi, D., "Morphing Upper Torso: A Novel Concept in EVA Suit Design," SAE Technical Paper 2006-01-2142, 2006, https://doi.org/10.4271/2006-01-2142.Also In
References
- Frazer, A.L. et al “Astronaut Performance: Implications for Future Spacesuit Design” IAA Paper IAC-02-G.5.03 2002
- Harris, Gary L. “The Origins and Technology of the Advanced Extravehicular Space Suit” AAS History Series 24 American Astronautical Society 2001
- Thomas, Kenneth S. McMann, Harold J. “US Spacesuits” Springer-Praxis 2006
- Graziosi, D. Ferl, J. Splawn, K. “An Examination of Spacesuit Entry Types and the Effect on Suit Architecture” AIAA Space 2004 Conference Sept. 2004
- Schmidt, P.B. Newman, D.J. Hodgson, E. “Modeling Space Suit Mobility: Applications to Design and Operations” 31 st International Conference on Environmental Systems, SAE Paper 01ICES-115 July 2001
- Stewart, D. “A Platform with Six Degrees of Freedom” Institution of Mechanical Engineers, Proceedings 180 15 371 386 1965
- Fichter, E.F. “A Stewart Platform-Based Manipulator: General Theory and Practical Construction” Int. J. of Robotics and Research 5 2 1986
- Dasgupta, B. Mruthyunjaya, T.S. “The Stewart Platform Manipulator: A Review” Mechanism and Machine Theory 35 1 15 40 2000
- Albus, J. Bostelman, R. Dagalakis, N. “The NIST SPIDER, A Robot Crane” J. of Research NIST 7 3 373 385 1992
- Mroz, G. Notash, L. “Design and Prototype of Parallel, Wire-Actuated Robots with a Constraining Linkage” J. of Robotic Systems 21 12 677 687 2004
- Graziosi, D. Lee, R. “I-Suit Advanced Spacesuit Design Improvements and Performance Testing” 33 rd International Conference on Environmental Systems, SAE Paper 2003-01-2442 July 2003