This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
A Modeling Investigation of Combustion Control Variables During DI-Diesel HCCI Engine Transients
Technical Paper
2006-01-1084
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
A comprehensive system level modeling approach is used to understand the effects of the various physical actuators during diesel HCCI transients. Control concepts during transient operations are simulated using a set of actuators suitable for combustion control in diesel HCCI engines (intake valve actuation, injection timing, cooled EGR, intake boost pressure and droplet size). The impact of these actuating techniques on the overall engine performance is quantified by investigating the amount of actuation required, timing of actuation and the use of a combination of actuators. Combined actuation improved actuation space that can be used to phase combustion timing better and in extending the operating range. The results from transient simulations indicate that diesel HCCI operation would benefit from the combined actuation of intake valve closure, injection timing, boost and cooled EGR. While IVC actuation and cooled EGR provide ways to improve combustion phasing, variations in intake boost pressure and injection timing help to reduce wall wetting, improve fuel economy, increase homogeneity and maintain combustion stability. An example of a mode transition between conventional diesel and HCCI combustion regimes is also demonstrated by altering the charge preparation (spray characteristics) and using a combination of control variables. The study shows that diesel-HCCI-diesel mode transitions can be achieved with minimal effects from cycle-to-cycle coupling by trapping the least amount of hot residuals from previous engine cycles.
Recommended Content
Authors
Topic
Citation
Narayanaswamy, K. and Rutland, C., "A Modeling Investigation of Combustion Control Variables During DI-Diesel HCCI Engine Transients," SAE Technical Paper 2006-01-1084, 2006, https://doi.org/10.4271/2006-01-1084.Also In
Homogeneous Charge Compression Ignition (HCCI) Combustion 2006
Number: SP-2005; Published: 2006-04-03
Number: SP-2005; Published: 2006-04-03
References
- Zhao, F. Asmus, T. Assanis, D. Dec, J. Eng, J. Najt, P. “Homogeneous Charge Compression Ignition Engines - Key Research and Development Issues,” SAE International 0-7680-1123-X
- Olsson, J.O. Tunestal, P. Johansson, B. “Closed - Loop Control of an HCCI Engine,” SAE Paper No. 2001-01-1031 2001
- Strandh, P. Bengtsson, J. Johansson, R. Tunestal, P. Johansson, B. “Cycle-to-Cycle Control of a Dual-Fuel HCCI Engine,” SAE Paper No. 2004-01-0941 2004
- Harraldson, G. Tunestal, P. Johansson, B. Hyvonen, J. “HCCI combustion phasing with closed-loop combustion control using variable compression ratio in a multi-cylinder engine,” SAE Paper No. 2003-01-1830 2003
- Harraldson, G. Tunestal, P. Johansson, B. Hyvonen, J. “HCCI Closed-Loop Combustion Control Using Fast Thermal Management,” SAE Paper No. 2004-01-0943 2004
- Agrell, F. Ångström, H.-E Eriksson, B. Wikander, J. Linderyd, J. “Integrated Simulation and Engine Test of Closed Loop HCCI Control by Aid of Variable Valve Timings SAE Paper No. 2003-01-0748 2003
- Agrell, F. Ångström, H.-E Eriksson, B. Wikander, J. Linderyd, J. “Transient control of HCCI through combined intake and exhaust valve actuation,” SAE Paper No. 2003-01-3172 2003
- Shaver, G.M. Gerdes, J.C. Roelle, M. “Physics Based Close-Loop Control of Phasing, Peak Pressure and Work Output in HCCI Engines Utilizing Variable Valve Actuation,” American Controls Conference 150 155 2004
- Agrell, F. Ångström, H.-E Eriksson, B. Wikander, J. Linderyd, J. “Control of HCCI During Engine Transients by Aid of Variable Valve Timings Through the Use of Model-Based, Non-Linear Compensation,” SAE Paper No. 2005-01-0131 2005
- Strandh, P. Bengtsson, J. Johansson, R. Tunestal, P. Johansson, B. “Variable Valve Actuation for Timing Control of a Homogeneous Charge Compression Ignition Engine,” SAE Paper No. 2005-01-0147 2005
- Harraldson, G. Tunestal, P. Johansson, B. Hyvonen, J. “Transient Control of a Multi Cylinder HCCI Engine During a Drive Cycle,” SAE Paper No. 2005-01-0153 2005
- Matthews, J. Santoso, H. Cheng, W.K. “Load Control for an HCCI Engine,” SAE Paper No. 2005-01-0150 2005
- Hyvonen, J. Harraldson, G. Johansson, B. “Balancing Cylinder-to-Cylinder Variations in a Multi-Cylinder VCR-HCCI Engine,” SAE Paper No. 2004-01-0943 2004
- Koopmans, L. Strom, H. Lundgren, S. Backlund, O. “Demonstrating a SI-HCCI-SI Mode Change on a Volvo 5-Cylinder Electronic Valve Control Engine,” SAE Paper No. 2003-01-0753 2003
- Santoso, H. Matthews, J. Cheng, W.K. “Managing SI/HCCI Dual-Mode Engine Operation,” SAE Paper No. 2005-01-0162 2005
- Milovanovic, N. Blundell, D. Gedge, S. Turner J. “SI-HCCI-SI Mode Transition at Differenr Engine Operating Conditions,” SAE Paper No. 2005-01-0156 2005
- Ohyama, Y. “Simultaneous Control of Air/fuel Ratio and Intake, Exhaust Valve Timing for HCCI Operation,” SAE Paper No. 2003-01-1084 2003
- Xu, H. Rudolph, S. Liu, Z. Wallace, S. Richardson, S. Wyszynski, M. Megaritis, A. “An Investigation into the Operating Mode Tranistions of a Homogeneous Charge Compression Ignition Engine Using EGR Trapping,” SAE Paper No. 2004-01-1911 2004
- Livengood J.C. Wu, P.C. “Correlation of Autoignition Phenomena in Internal Combustion Engines and Rapid Compression Machines,” Fifth symposium on Combustion 347 356 1955
- Yanagihara H. “Ignition Timing Control at Toyota “UNIBUS” Combustion System,” Proceedings of the IFP International Congress on a New Generation of Engine Combustion Processes of the Future 34 42 2001
- Kimura S. Aoki, O. Ogawa, H. Muranaka, S. Enomoto, Y. “New Combustion Concept for Ultra-Clean and High Efficiency Small DI Diesel Engines,” SAE Paper No. 99-01-3681 1999
- Narayanaswamy, K. Rutland, C.J. “Cycle Simulation Diesel HCCI Modeling Studies and Control,” SAE Paper No. 2004-01-2997 2004
- Narayanaswamy, K. Hessel, R.P. Rutland, C.J. “A New Approach to Model DI-Diesel HCCI Combustion for Use in Cycle Simulation Studies,” SAE Paper No. 2005-01-3743 2005
- Gamma Technologies GT-Power User's Manual and tutorial, GT-Suite Version 6.0 March 2003
- Kee, R.J. Rupley, F.M. Miller, J. A. “Chemkin - II: A Fortran Chemical Kinetics Package for the Analysis of Gas Phase Chemical Kinetics” Sandia National Laboratory Report 1989
- Golovitchev, V.I. http://www.tfd.chalmers.se/∼valeri/MECH.html Chalmers University of Technology Goteborg, Sweden 2000
- http://www.me.berkeley.edu/gri_mech/
- Ra, Y. Reitz, R. D. “The Use of Variable Geometry Sprays With Low Pressure Injection for Optimization of Diesel HCCI Engine Combustion,” SAE Paper No. 2005-01-0148 2005
- Ra., Y. Reitz, R.D. “The Role of Vaporization in Mixture Preparation for HCCI Engine Combustion,” ILASS AMERICAS, 17 th Annual Conference on Liquid Atomization and Spray Systems Arlington, Virginia May 2004
- Walter, B. Gatellier, B. “Development of the high power NADI concept using dual mode combustion to achieve zero NOx and particulate emissions,” SAE Paper No. 2002-01-1744 2002