This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
3D-Durability Analysis of Crankshafts via Coupled Dynamic Simulation including Modal Reduction
Technical Paper
2006-01-0823
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The combination of multi purpose software with powertrain specific application codes allows highly flexible simulation models, which are independent on the specific engine concept. Related to the requests those models may be refined or simplified during the simulation process. Finally a fully coupled 3D dynamic simulation including flexible components is performed to assess the engine crankshaft's durability. To take into account the stiffness of the cranktrain components and the cylinder block at first a linear Finite Element Analysis (FEA) simulation is performed. Via modal reduction the complete deformation order information of the FEA simulation are reduced to the necessary information for the dynamic Multi Body System (MBS) simulation [1, 2]. All main boundary conditions of the system, e. g. gas forces, oil temperature or driveline application are taken into account. To cover the engine's complete rpm range, a set of steady state analyses is performed to evaluate possible resonances, the minimum safety factor, the rpm at which it occurs and its physical location. For selected rpm values the 3D distribution of the safety factors with local high resolution, the maximum mean and amplitude stresses and the deformations are investigated. The dynamic result evaluation supports the understanding of loading mechanism and the occurrence of safety factors.
Recommended Content
Authors
Citation
Ortjohann, T., Rebbert, M., Maassen, F., and Robers, M., "3D-Durability Analysis of Crankshafts via Coupled Dynamic Simulation including Modal Reduction," SAE Technical Paper 2006-01-0823, 2006, https://doi.org/10.4271/2006-01-0823.Also In
References
- Raub J. Jones J. D. Kley P. Rebbert M. Analytical Investigation of Crankshaft Dynamics as a Virtual Engine Module SAE-Paper 1999-01-1750 1999
- ADAMS/Engine Advanced Cranktrain Tutorial, MSC.Software 2005
- Hafner K. E. Maass H. Die Verbrennungskraftmaschine, Neue Folge Band 4 Torsionsschwingungen in der Verbrennungskraftmaschine Springer Verlag Wien 1985
- Thomas S. Maassen F. A New Transient Elastohydrodynamic (EHD) Bearing Model Linkable to ADAMS SAE-Paper 2001-01-1075 2001
- Thomas S. Analyse des Betriebsverhaltens von Kurbelwellengleitlagern mittels TEHD-Berechnungen Aachen 2003
- Duesmann M. Maaßen F. Rebbert M. Haubner F. Dohmen J. Orlowsky K. Ortjohann T. Anforderungen an das System Kurbeltrieb VDI Tagung München 16 17 9 2003 VDI 2003
- MSC/Fatigue User manual and theory 2005
- FEMFAT 4.5 Basic / Max Benutzerhandbuch Magna Steyr 2005
- Conradt, G. Wärmebehandlungskriterien bei der Werkstoffauswahl für Kurbelwellen BMW Group, MTZ 2 2003 Jahrgang 64 2003