This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Evaluating the Correlations Between Surface Roughness and Dynamic Friction During Metal Forming
Technical Paper
2006-01-0786
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The influence of surface roughness on the dynamic friction behavior of AA5754-O aluminum was evaluated with single-pull friction experiments in three significantly different surface roughness conditions: polished to a 1.0 μm diamond finish, polished with 8 %, and polished with 16 % uniaxial plastic strain. The surfaces were examined before and after the friction tests with confocal microscopy. The changes observed in the dynamic friction coefficient between the polished and roughened surfaces imply that the influence of surface roughness on the friction may reach a steady state prior to 8 % plastic strain. The friction test also produced distinct changes in: the topographic images; the plots of both the probability density and the 2-point correlation function ensembles determined from the topographic data; and the numeric quantities calculated from the probability density and 2-point correlation data.
Recommended Content
Authors
- M. R. Stoudt - Materials Science & Engineering Laboratory, National Institute of Standards and Technology
- J. B. Hubbard - Materials Science & Engineering Laboratory, National Institute of Standards and Technology
- S. P. Mates - Materials Science & Engineering Laboratory, National Institute of Standards and Technology
- D. J. Pitchure - Materials Science & Engineering Laboratory, National Institute of Standards and Technology
Topic
Citation
Stoudt, M., Hubbard, J., Mates, S., and Pitchure, D., "Evaluating the Correlations Between Surface Roughness and Dynamic Friction During Metal Forming," SAE Technical Paper 2006-01-0786, 2006, https://doi.org/10.4271/2006-01-0786.Also In
References
- Stoudt M.R. Ricker R.E. Metall. Mater. Trans. A 2002 33A 2883 2889
- Saha P.K. Wilson W.R.D. Timsit R.S. Wear 1996 197 123 129
- Wilson W.R.D. J. Manu. Sci. & Engr. 1997 119 695 698
- Lo S.W. Horng T.C. J. Tribology 1999 121 224 233
- Sofuglu H. Gedikli H. Rasty J. Journal of Engineering Materials and Technology-Transactions of the ASME 2001 123 3 338 348
- Stoudt M.R. Hubbard J.B. Mates S.P. Green D.E. SAE SP-1954: Innovations in Modeling and Testing of Steel Structures for Automotive Applications, and Front and Rear Bumper Systems Iyengar R.M. Speer J.G. Shah V.C. Warrendale, PA SAE 2005
- Stoudt M.R. Hubbard J.B. Mates S.P. Green D.E. SAE Trans. J. Mater. & Manu.
- Stoudt M.R. Mates S.P. Hubbard J.B. Pitchure D.J. Numisheet 2005 A Smith L.M. Pourboghrat F. Yoon J.-W. Stoughton T.B. Melville, NY AIP 2005 136 141
- Worthington P.J. Brindley B.J. Phil. Mag. 1969 19 1175 1178
- Robinson J.M. Shaw M.P. Mater. Sci. Engr. A 1994 A174 1 7
- Kubin L.P. Estrin Y. Acta Metall. Mater. 1990 38 5 697 708
- McCormick P.G. Acta Metall. 1971 19 463 471
- Inagaki A. Komatsubara T. Inagaki H. Z. Metallkd. 1999 90 6 427 433
- Aluminum Standards and Data 2003 12 Washington, DC The Aluminum Association 2003
- VanderVoort G.F. Metallography Principles and Practice Materials Park, OH ASM International 1999
- Stoudt M.R. Hubbard J.B. Janet S.A. Liu J. Sixth Global Innovations Symposia on Materials Processing: Trends in Materials and Manufacturing Technologies and Powder Metallurgy R&D in the Transportation Industries Bieler T. R. Carsley J. E. Fraser H. L. Smugeresky J.E. Warrendale, PA TMS 2005 89 94
- Ashby M.F. Phil. Mag. 1970 21 399 424
- Becker R. Acta Mater. 1998 46 4 1385 1401
- Dai Y.Z. Chiang F.P. J. Eng. Mat. Tech. 1992 114 Oct 432 438
- Osakada K. Oyane M. Bull. JSME 1971 14 68 171 177
- Stoudt M.R. Hubbard J.B. Banovic S.W. SAE Trans. J. Mater. & Manu. 2005 5 50 58
- Feller W. An Introduction to Probability Theory and its Applications 2 2nd NY, NY J. Wiley & Sons 1971
- Stoudt M.R. Hubbard J.B. Acta Mater. 2005 53 16 4293 4304
- Longuet-Higgins M.S. Philos. Trans. R. Soc. (London) A 1957 250 157 174
- Thomas T.R. Rough Surfaces 2nd London Imperial College Press 1999
- Black A.J. Kopalinsky E.M. Oxley P.L.B. J. Mech. Engr. Sci. 1993 207 5 335 353
- Tayebi N. Polycarpou A.A. Tribol. Int. 2004 37 491 505
- Whitehouse D.J. Archard J.F. Proceedings of the Royal Society (London) 1970 A316 97 121
- Berne B.J. Pecora R. Dynamic Light Scattering NY, NY J. Wiley & Sons 1976
- Taylor B.N. Kuyatt C.E. “Guidelines for Evaluating and Expressing the Uncertainty of NIST Measurement Results,” NIST Technical Note 1297 1994 NIST 1994