This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
An Internet-Based System Architecture for Collaborative Product Development
Technical Paper
2006-01-0364
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
This paper proposes an Internet-based solution to facilitate Collaborative Product Development (CPD) in manufacturing enterprises. In the proposed system architecture, an Internet-based collaborative platform provides all participants with basic facilities, including collaboration services and database services. At the middle layer of the architecture, four modules, namely, RCM-based (Result-Chain based Modeling) process management, product structure management, Virtual Reality, and multimedia conference, work together to support collaborations between participating and no-participating users. Detailed implementation issues are addressed and future work is discussed.
Recommended Content
Authors
- Xiaozhen Mi - School of Mechanical Engineering, Dalian Jiaotong University
- Qin Si - School of Mechanical Engineering, Dalian Jiaotong University
- Weiming Shen - Integrated Manufacturing Technologies Institute, National Research Council Canada
- Qi Hao - Integrated Manufacturing Technologies Institute, National Research Council Canada
Topic
Citation
Mi, X., Si, Q., Shen, W., and Hao, Q., "An Internet-Based System Architecture for Collaborative Product Development," SAE Technical Paper 2006-01-0364, 2006, https://doi.org/10.4271/2006-01-0364.Also In
References
- Aziz, H. Gao, J.X. Maropoulos, P.G. Cheung, W.M. 2000 “Advanced tools and technologies for collaborative product development and knowledge management,” Advances Manufacturing Technology XVI-Proceedings of the Eighteenth National Conference on Manufacturing Research 115 120
- Chang, H.C. Lu, W.F. 1999 “WWW-based collaborative system for integrated design and manufacturing,” Concurrent Engineering Research and Applications 7 4 319 334
- Chung, M.J. Kwon, P. Pentland, B. 2000 “MIDAS: A framework for integrated design and manufacturing process,” Proceedings of the SPIE the International Society for Optical Engineering 4192 348 355
- Fruchter, R. Reiner, K.A. Toye, G. Leifer, L. J. 1996 “Collaborative mechatronic system design,” Concurrent Engineering: Research and Applications Technomic Publishing Co. Inc. 4 4 401 412
- Gallagher, S. Monaghan, A. Irgens, C. 1997 “A technique for projecting the product model throughout the organization via a commercially available, feature-based CAD system,” 5th International Conference on Factory 2000 Conference Publication 337 345
- Gao, J.X. Aziz, H. Maropoulos, P.G. Cheung, W.M. 2003 “Application of product data management technologies for enterprise integration,” International Journal of Computer Integrated Manufacturing 16 7-8 491 500
- Hao, Q. Shen, W. Zhang, Z. 2005 “An autonomous agent development environment for engineering applications,” International Journal of Advanced Engineering Informatics 19 2 123 134
- Hao, Q. Shen, W. Wang, S. 2005 “Agent-oriented manufacturing scheduling services for enterprise cooperation,” Proceedings of SAE 2005, Paper Number: 05B-215 Detroit, MI
- Hao, Q. Shen, W. Zhang, Z. Park, S.W. Lee, J.K. 2005 “Agent-based collaborative product design engineering: An industrial case study,” Computers in Industry
- Huang, G.Q. Huang, J. Mak, K.L. 2000 “Agent-based workflow management in collaborative product development on the Internet,” Computer-Aided Design 32 2 133 144
- Lau, H.Y.K. Mak, K.L. Lu, M.T.H. 2003 “A virtual design platform for interactive product design and visualization,” Journal of Materials Processing Technology 139 402 407
- Li, W.D. Fuh, J.Y.H. Wong, Y.S. 2004 “An Internet-enabled integrated system for co-design and concurrent engineering,” Computers in Industry 55 1 87 103
- Liu, X. Mi, X. Zeng, C. 2003 “Research on result-chain based modeling and its application in enterprise analysis and system design,” 7th World Multi-Conference on Systems, Cybernetics and Informatics Proceedings 16 161 166
- McGuire, J.G. Kuokka, D.R. Weber, J.C. Tenenbaum, J.M. Gruber T.R. Olsen, G.R. 1993 “SHADE: Technology for knowledge-based collaborative engineering,” Concurrent Engineering: Research and Applications 1 1 137 146
- Mi, X. 2003 “Research on system analysis and process management technology of digital developing system for complicated product,” Ph. D thesis Dalian University of Technology
- Mi, X. Zhao, W. Huang X. Liu, X. 2004 “Application of DD-RCM technology in complicated product digital development implementing,” Proceedings of 8th International Conference on Computer Supported Cooperative Work in Design 2 62 66
- Mi, X. Shen, W. 2005 “Computer supported collaborative product development: A review” Proceedings of 9th International Conference on Computer Supported Cooperative Work in Design Coventry, UK
- Nahm, Y Ishikawa H. 2004 “Integrated Product and Process Modeling for collaborative design environment,” Integrated Product and Process Modeling 12 1 5 23
- Qiang, L. Zhang, Y.F. Nee, A.Y.C. 2001 “A distributive and collaborative concurrent product design system through the WWW-Internet,” International Journal of Advanced Manufacturing Technology 17 5 315 322
- Roy, U. Bharadwaj, B. Kodkani S.S. Cargian, M. 1997 “Product development in a collaborative design environment,” Concurrent Engineering Research and Applications 5 4 347 365
- Shen, W. Barthès, J.P. 1994 “A distributed architecture for design environment using asynchronous cognitive agents,” Proceedings of SPICIS'94 Singapore B327 334
- Shen, W. Norrie, D.H. Barthes, J.P. 2001 Multi-Agent Systems for Concurrent Intelligent Design and Manufacturing Taylor and Francis London, UK
- Shen, W. Wang, L. 2003 “Web-based and agent-based approaches for collaborative product design: An overview,” International Journal of Computer Applications in Technology 16 2/3 103 112
- Shen, W. Hao, Q. 2004 “A service oriented framework for blow molded automotive parts design and optimization,” Proceedings of SAE 2004 , Paper Number: 04CONG-8 Detroit, MI
- Shyamsundar, N. Gadh, R. 2002 “Collaborative virtual prototyping of product assemblies over the Internet,” Computer-Aided Design 34 755 768
- Tay, F.E.H. Ming, C. 2001 “A shared multimedia design environment for concurrent engineering over the Internet,” Concurrent Engineering; Research and Applications 9 1 55 63
- Wang, Y. Shen, W. Ghenniwa, H. 2003 “WebBlow: a Web/agent-based multidisciplinary design optimization environment,” Computers in Industry 52 1 17 28
- Wilsey, P.A. 1999 “Web-based analysis and distributed IP,” Proceedings of the 1999 Winter Simulation Conference - Simulation: a Bridge to the Future Piscataway, NJ, USA 2 1445 1453
- Wognum, P.M. Concalves, R.J. Graaf, R.D. Lettice, F. Roy, R. 2003 “Analysis on 10 years of ISPE/CEconf community,” Proceedings of the 10th ISPE International Conference on Concurrent Engineering Research and Application: Enhanced Interoperable system 17
- Zha, X.F. Du, H. 2002 “Product Web-based knowledge-intensive support framework for collaborative design of MEMS,” Journal of Micromechanics and Micro-engineering 12 5 512 524
- Zhang, S. Shen, W. Ghenniwa, H. 2005 “A Web based framework for product information sharing and visualization,” International Journal of Agile Manufacturing 8 1 13 26