This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Electronic Throttle Simulation Using Nonlinear Hammerstein Model
Technical Paper
2006-01-0112
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
In this paper, a nonlinear Hammerstein model was used to represent the dynamic behavior of an electronic throttle body at different operating conditions. The structure of the Hammerstein model was nonlinear in its parameters. It consisted of a static nonlinear function representing the coulomb friction and limp-home return springs in series with dynamic piecewise-linear transfer functions. The mathematical modeling of the throttle body was derived in state-space discrete form. Separable least squares estimation and optimization methods were implemented as a means of simultaneously estimating and identifying both the linear and nonlinear elements to match the results obtained from the simulation of the nonlinear Hammerstein model and the experimental tests. The open- and closed-loop verification were carried out by integrating the nonlinear Hammerstein model and the controller into production electronic control unit software (TargetLink Block) using the rapid prototyping real-time system. The hardware-in-loop implementation and testing of the embedded control software with the nonlinear Hammerstein model and actual throttle body revealed that the open and closed-loop experimental results matched the simulation results.
Recommended Content
Technical Paper | Hardware In the Loop Validation of the PIAGGIO MP3 |
Technical Paper | Hardware-In-the-Loop Testing of Automotive Control Systems |
Journal Article | Application of Auto-Coding for Rapid and Efficient Motor Control Development |
Authors
Topic
Citation
Al-Assadi, S., Breitinger, J., and Traver, M., "Electronic Throttle Simulation Using Nonlinear Hammerstein Model," SAE Technical Paper 2006-01-0112, 2006, https://doi.org/10.4271/2006-01-0112.Also In
SAE 2006 Transactions Journal of Passenger Cars: Electronic and Electrical Systems
Number: V115-7; Published: 2007-03-30
Number: V115-7; Published: 2007-03-30
References
- Eriksson L. Nielsen, “Non-Linear Model-Based Throttle Control” SAE2000 World Congress , 2000-01-0261
- Yang C. “Model Based Analysis and Tuning An Electronic Throttle Controllers” SAE2004 World Congress , 2004-01-0524
- Shao L. Saikalis G. Mccune S. Ridder J. Lin J. “An Electronic Throttle Simulation Model with Automatic Parameter Tuning” SAE2005 World Congress , 2005-01-1441
- Haber R. Unbehauen H. “Structure Identification of Nonlinear Dynamic Systems-A survey on Input/Output Approaches” Automatica 26 651 677 1990
- Pearson R. Pottmann M. “Gray-box Identification of Blocked-oriented Nonlinear Models” J. Process Control 10 301 315 2000
- Kalafatis A. Arifine N. Wang L. Cluett W. “A new approach to the identification of pH processes based on the Wiener model” Chemical Engineering Science 50 23 3693 3701 1995
- Kprenberg M. “Identification of Biological cascades of Linear and Static Nonlinear Systems” 16 th Midwest Symposium on Circuit Theory 2 1 9 1978
- Stapleton J. Bass S. “Adaptive Noise Cancellation for a Class of Nonlinear Dynamic Reference Channels” IEEE Transactions on Circuits and Systems 32 143 150 1985
- Fruzzetti K. Palazogluand A. McDonald K. “Nonlinear Model Predictive Control using Hammerstein Models” J. Process Control 7 31 41 1997
- Garulli A Giarre L Zappa G. “Identification of Approximated Hammerstein Models in a Worst-Case Setting” IEEE Transaction on Automatic Control 47 12 December 2002
- Voros J. “Parameter Identification of Hammerstein Systems with Asymmetric Dead-Zones” Electrical Engineering Journal 55 1 2004
- MathWorks “Identification Toolbox” September 2000
- MathWorks “Nonlinear Control Design Blockset Toolbox” April 1997