This content is not included in your SAE MOBILUS subscription, or you are not logged in.
The Effect of Induced Swirl Pattern on TDC Flow Field in a HSDI Diesel Engine
ISSN: 0148-7191, e-ISSN: 2688-3627
Published October 23, 2005 by The Automotive Research Association of India in India
Annotation ability available
Event: International Mobility Engineering Congress & Exposition 2005 - SAE India Technology for Emerging Markets
The present work studies the effect of cylinder swirl patterns along the cylinder axis obtained during early compression, on bowl flow velocities and generated turbulent kinetic energy at TDC. In-cylinder velocity field is simulated during induction and compression strokes using multidimensional fluid dynamics theory. The operating speed for the simulation is fixed at 900 rpm, which is typical of idling speeds. For a fixed averaged cylinder swirl ratio, axial stratification of swirl with higher magnitude located near the piston surface at early compression (55° BTDC) results in high magnitude of swirl and turbulent kinetic energy inside the piston bowl near compression TDC.
- S Alfred Herman - Internal Combustion Engines Laboratory, Department of Mechanical Engineering, Indian Institute of Technology Madras, Chennai 600 036, India
- V Ganesan - Internal Combustion Engines Laboratory, Department of Mechanical Engineering, Indian Institute of Technology Madras, Chennai 600 036, India
CitationHerman, S. and Ganesan, V., "The Effect of Induced Swirl Pattern on TDC Flow Field in a HSDI Diesel Engine," SAE Technical Paper 2005-26-319, 2005, https://doi.org/10.4271/2005-26-319.
- Arcoumanis. C. Whitelaw. J. H. Hentschel. W. Schindler. K-P. 1994 “Flow and Combustion in a Transparent 1.9 Litre Direct Injection Diesel Engine” Proc. Instn. Mech. Engrs. Vol. 208 pp. 191 205
- Cipolla. G. Puglisi. A. Vafidis. C. 1987 “In-cylinder Velocity Field Measurements in a Motored Diesel Engine” SAE Paper No. 870373
- Fansler T. D. French. D. T. 1987 “Swirl, Squish and Turbulence in Stratified- Charge Engines: Laser Velocimetry Measurements and Implications for Combustion” SAE Paper No. 870371
- Gosman. A. D. 1985 “Multidimensional Modelling of Cold Flows and Turbulence in Reciprocating Engines” SAE Paper No. 850344
- Lin Lu Shulin Duan Jin Xiao Jinxiang Wu Xiaohong Gao 2000 “Effects of combustion chamber geometry on in-cylinder air motion and performance in DI diesel engine” SAE Paper No. 2000-01-0510
- Miles. P. C. 2000 “Combustion of an Ethanol / Diesel Fuel Blend in an HSDI Diesel Engine” The THIESEL 2000 Conference Sept. 2000
- Miles Paul Megerle Marcus Sick Volger Richards Keith Nagel Zac Reitz Rolf 2001 “The Evolution of Flow Structures and Turbulence in a Fired HSDI Diesel Engine” SAE Paper No. 2001-01-3501
- Payri. F. Desantes. J. M. Pastor. J. V. 1996 “LDV measurements of the flow inside the combustion chamber of a 4-valve DI diesel engine with axisymmetric piston-bowls” Expts. In Fluids Vol. 22 No. 2 Dec 1996
- Schäpertöns. H. Thiele. F. 1986 “Three Dimensional Computations for Flow Fields in DI Piston Bowls” SAE Paper No. 860463
- Stephenson. P. W. Rutland. C. J. 1995 “Modeling the Effects of Valve Lift Profile on Intake Flow and Emissions Behaviour in a DI diesel engine” SAE Paper No. 952430
- Uchida. N. Shimokawa, K. Kudo. Y. Shimoda. M. 1998 “Combustion Optimisation by means of Common Rail Injection System for Heavy-Duty Diesel Engines” SAE Paper No. 982679
- Wakisaka. T. Shimamoto. Y. Isshiki. Y. 1986 “Three Dimensional Numerical Analysis of In-cylinder Flows in Reciprocating Engines” SAE Paper No. 860464
- Yakhot. V. Orszag. S. A. 1986 “Renormalization Group Analysis of Turbulence - I: Basic Theory” J. Scientific Computing Vol. 1 pp. 1 51
- Yakhot. V. Orszag. S. A. Thangam. S. Gatski. T. B. Speziale. C. G. 1992 “Development of Turbulence Models for Shear Flows by a Double Expansion Technique” Phy. Fluids Vol. A4 No. 7 pp. 1510 1520