This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Constant Power Load Characteristics in Multi-Converter Automotive Power Electronic Intensive Systems
Technical Paper
2005-01-3451
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Intensifying demands for higher fuel economy from one hand and environmental concerns from the other are driving advanced automotive power systems to be more electric. As a result, automotive electrical systems with higher capacity and more complexity are needed to cope with this expanding electrification trend. As different electrical applications and loads are being introduced in automobiles, multi-converter intensive power electronic systems are emerging as the next generation of the advanced automotive electrical systems. In fact, power electronic converters and electric motor drives are inevitable parts of more electric automotive power systems. When power electronic converters and electric motor drives are tightly regulated to improve system performance and efficiency, they present negative impedance characteristics of constant power loads to the entire automotive electrical system. This destabilizing effect may cause system instability. In view of this emerging challenge, this paper aims at presenting a comprehensive review of the possible solutions and projected future research and development work to address constant power load characteristics in advanced automotive electrical systems.
Recommended Content
Authors
Citation
Khaligh, A., Emadi, A., Williamson, G., and Rivetta, C., "Constant Power Load Characteristics in Multi-Converter Automotive Power Electronic Intensive Systems," SAE Technical Paper 2005-01-3451, 2005, https://doi.org/10.4271/2005-01-3451.Also In
References
- Emadi A. Ehsani M. Miller J. M. Vehicular Electric Power Systems: Land, Sea, Air, and Space Vehicles New York Marcel Dekker Dec. 2003
- Ehsani M. Gao Y. Gay S. E. Emadi A. Modern Electric, Hybrid Electric, and Fuel Cell Vehicles: Fundamentals, Theory, and Design Boca Raton, FL CRC Press Dec. 2004
- Chan C. C. Wong Y. S. “Electric vehicles charge forward,” IEEE Power and Energy Magazine 2 Nov.-Dec. 2004 24 33
- Ehsani M. Emadi A. “Multi-converter power systems and their applications,” Journal of Electric Power Components and Systems 29 Oct. 2001 949 963
- Chan C. C. “The state of the art of electric and hybrid vehicles,” Proc. IEEE 90 245 246 Feb. 2002
- Nicastri P. Huang H. “42V PowerNet: Providing the vehicle electrical power for the 21 st century,” Proc. SAE Future Transportation Technology Conf. and Expo. Costa Mesa, CA Paper No. 2000-01-3050 Aug. 2000
- Chan C. C. Wong Y. S. “The state of the art of electric vehicles technology,” Proc. IEEE 4 th Power Electronics and Motion Control Conf. (IPEMC) 1 Aug. 2004 46 57
- Kassakian J. G. Wolf H. Miller J. M. Hurton C. J. “The future of automotive electrical systems,” Proc. IEEE Workshop on Power Electronics in Transportation Dearborn Oct. 1996
- Kassakian J. G. Wolf H. C. Miller J. M. Hurton C. J. “Automotive electrical systems-circa 2005,” IEEE Spectrum Aug. 1996 22 27
- Chan C. C. Chau K. T. “An overview of electric vehicles-challenges and opportunities,” Proc. IEEE 22 nd Industrial Electronics, Control, and Instrumentation Conf. (IECON) 1 Aug. 1996 1 6
- Miller J. M. Nicastri P. R. “The next generation automotive electrical power system architecture: Issues and challenges,” 1 st Digital Avionics Systems Conference on Air, Space, and Ground Vehicle Electronic Systems Bellevue, WA Oct. Nov. 1998
- Emadi A. Fahimi B. Ehsani M. “On the concept of negative impedance instability in advanced aircraft power systems with constant power loads,” Society of Automotive Engineers (SAE) Journal , Paper No. 1999-01-2545 Proc. 34 th Intersociety Energy Conversion Engineering Conference Vancouver, British Columbia, Canada Aug. 1999
- Grigore V. Hatonen J. Kyyra J. Suntio T. “Dynamics of a Buck converter with constant power load,” Proc. IEEE 29 th Power Electronics Specialist Conf. Fukuoka, Japan May 1998 72 78
- Belkhayat M. Cooley R. Witulski A. “Large signal stability criteria for distributed systems with constant power loads,” Proc. IEEE 26 th Power Electronics Specialist Conf. Atlanta, Georgia June 1995 1333 1338
- Glover S. F. Sudhoff S. D. “An experimentally validated nonlinear stabilizing control for power electronics based power systems,” SAE 981255
- Ciezki J. G. Ashton R. W. “The design of stabilizing controls for shipboard DC-to-DC Buck choppers using feedback linearization techniques,” Proc. IEEE 29 th Power Electronics Specialist Conf. Fukuoka, Japan May 1998 335 341
- Mahdavi J. Emadi A. “Sliding-mode control of PWM Cuk converter,” Proc. IEE Power Electronics and Variable Speed Drives Conf. Nottingham, UK Sep. 1996 372 377
- Sudhoff S. D. Glover S. F. Zak S. H. Pekarek S. D. Zivi E. J. Delisle D. E. Clayton D. “Stability analysis methodologies for DC power distribution systems,” Presented at the 13 th International Ship Control Systems Symposium (SCSS) Orlando, Florida April 2003
- Middlebrook R. D. Cuk S. “A general unified approach to modeling switching converter power stages,” Proc. IEEE, Power Electronics Specialist Conf. 1976 18 34
- Krein P. T. Betsman J. Bass R. M. Lesieutre B. L. “On the use of averaging for the analysis of the power electronic systems,” IEEE Trans. on Power Electronics 5 2 April 1990
- Choi B. Cho B. Hong S. “Dynamics and control of DC-to-DC converters driving other converters downstream,” IEEE Trans. on Circuits and Systems I 46 10 1240 1247 Oct. 1999
- Sudhoff S. D. Glover S. F. “Three-dimensional stability analysis of DC power electronics based systems,” Proc. IEEE 31 st Annual Power Electronics Specialists Conference 101 106
- Rivetta C. Williamson G. A. “Large-signal analysis of a DC-DC buck power converter operating with constant power load,” Proc. IEEE Indust. Electronics Conf. Roanoke, VA Nov. 2003 72 78
- Rivetta C. Williamson G. A. “Global behavior analysis of a DC-DC boost power converter operating with constant power load,” Proc. IEEE International Symposium on Circuits and Systems (ISCAS) 5 May 2004 956 959
- Rivetta C. Williamson G. A. “Large-signal analysis and control of buck converters loaded by DC-DC converters,” Proc. IEEE 35 th Power Electronics Specialists Conference (PESC) 5 June 2004 3675 3680
- Rivetta C. Emadi A. Williamson G. A. Jayabalan R. Fahimi B. “Analysis and control of a buck DC-DC converter operating with constant power load in sea and undersea vehicles,” Proc. IEEE 39 th Industry Application Society Annual Meeting Seattle, WA Oct. 2004