This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Reproducibility and Repeatability of the SAE J4002 and J826 H-point Machines
Technical Paper
2005-01-1010
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
A study of repeatability and reproducibility of the SAE J4002 and SAE J826 H-point machines (HPMs) was conducted using 15 operators, five of each type of HPM, and four different vehicle seats. Each operator performed 24 installations over two days. Across the 24 measurements, operators used 3-4 of each type of manikin in 2-4 of the seats. For each operator, some trials were repeated three times to generate measures of within-operator repeatability. Operators measured H-point x and z location, and torso angle. Variance decomposition showed that for H-point measurements, the J4002 manikin has better reproducibility (between-operator variance) but the J826 manikin has better repeatability (within-operator variance). For torso angle, both reproducibility and repeatability are better for the newer manikin. In addition, different manikins of one type produced negligible additional variability. Thus, different manikins of one type can be considered virtually identical, while the variance in measurements is attributed to operators.
Recommended Content
Authors
Citation
Flannagan, C., "Reproducibility and Repeatability of the SAE J4002 and J826 H-point Machines," SAE Technical Paper 2005-01-1010, 2005, https://doi.org/10.4271/2005-01-1010.Also In
Human Factors in Driving, Telematics and Seating Comfort 2005
Number: SP-1934; Published: 2005-04-11
Number: SP-1934; Published: 2005-04-11
SAE 2005 Transactions Journal of Passenger Cars: Mechanical Systems
Number: V114-6; Published: 2006-02-01
Number: V114-6; Published: 2006-02-01
References
- Roe, R.W. Reed, M.P. Schneider, L.W. ASPECT manikin applications and measurements for design, audit, and benchmarking 1999 Technical Paper 990965 Warrendale, PA Society of Automotive Engineers, Inc.
- Reed, M.P. Roe, R.W. Schneider, L.W. 1999 Design and development of the ASPECT manikin Technical Paper 990963 Warrendale, PA Society of Automotive Engineers, Inc.
- Manary, M.A. Schneider, L.W. Flannagan, C.C. Eby, B.H. 1994 ASPECT manikin applications and measurements for design, audit, and benchmarking Technical Paper 941048 Warrendale, PA Society of Automotive Engineers, Inc.
- Montgomery, D.C. 1991 Statistical Quality Control ( 2nd ed.) New York Wiley & Sons.
- Society of Automotive Engineers 2004 Automotive Engineering Handbook Warrendale, PA Society of Automotive Engineers, Inc.
- Verbeke, G. Molenberghs, G. 1997 Linear Mixed Models in Practice: A SAS-Oriented Approach New York Springer-Verlag