This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
In-cylinder Studies of Multiple Diesel Fuel Injection in a Single Cylinder Optical Engine
Technical Paper
2005-01-0915
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
An experimental study has been carried out on the multiple fuel injection process and its effect on the mixing and combustion in a single cylinder diesel engine with optical access. The engine is equipped with a production type cylinder head and a high pressure common rail fuel system which comprises a directly driven high pressure fuel pump and a control system capable of 8 injections per stroke. The single cylinder optical engine could be operated lubrication-free for up to 5 minutes due to the application of special coating on the piston liner and careful design of the piston and extended cylinder block. The in-cylinder spray and combustion were visualized at 10,000 fps by a high-speed colour video camera and a copper vapour laser. The high-speed video recordings and in-cylinder pressure and heat release analysis for up to four fuel injections will be presented and discussed.
Recommended Content
Authors
Topic
Citation
Gill, K., Marriner, C., Sison, K., and Zhao, H., "In-cylinder Studies of Multiple Diesel Fuel Injection in a Single Cylinder Optical Engine," SAE Technical Paper 2005-01-0915, 2005, https://doi.org/10.4271/2005-01-0915.Also In
References
- Werlberger P. Cartellieri W.P. “Fuel Injection and Combustion Phenomena in a High Speed DI Diesel Engine Observed by Means of Endoscopic High Speed Photography” SAE Paper 870097
- Zambare V.V. Winterbone D.E. “A Photographic Investigation of Multi-Stage Fuel Injection in a Single Cylinder DI Diesel Engine” SAE Paper 1999-01-1501
- Nehmer D.A. Reitz R.D. “Measurement of the Effect of Injection Rate and Split Injections on Diesel Engine Soot and NOx Emissions” SAE Paper 940668
- Tow T.C. Pierpont D.A. Reitz R.D. “Reducing Particulate and NOx Emissions by using Multiple Injections in a Heavy Duty DI Diesel Engine” SAE Paper 940897
- Takeda Y. Niimura K. “Characteristics of Diesel Combustion and Emissions with a Multi-Injector System” SAE Paper 952511
- Han Z. Uludogan A. Hampson G. Reitz R.D. “Mechanism of Soot and NOx Emission Reduction Using Multiple-Injection in a Diesel Engine” SAE Paper 960633
- Pierpont D.A. Reitz R.D. “Effects of Injection Pressure and Nozzle Geometry on DI Diesel Emissions and Performance” SAE Paper 950604
- Wang T.C. Han J.S. Xie X. Lai M.C. Henein N.A. Schwarz E. Bryzik W. “Direct Visualization of High Pressure Diesel Spray and Engine Combustion” SAE Paper 1999-01-3496
- Shiozaki T. Nakajima H. Yokota H. Miyashita A. “The Visualization and Its Analysis of Combustion Flame in a DI Diesel Engine” SAE Paper 980141
- Corcione F.E. Vaglieco B.M. Corcione G.E. Lavorgna M. “Potential of Multiple Injection Strategy for Low Emission Diesel Engines” SAE Paper 2002-01-1150
- Corcione F.E. Vaglieco B.M. Corcione G.E. Vitale G. Carpentieri F. “Multiple Injection Strategies for Low Emissions of a New Small Common Rail DI Diesel Engine”
- Pierpont D.A. Montgomery D.T. Reitz R.D. “Reducing Particulate and NOx Using Multiple Injections and EGR in a DI Diesel” SAE Paper 950217
- Montgomery D.T. Reitz R.D. “Effects of Multiple Injections and Flexible Control of Boost and EGR on Emissions and Fuel Consumption of a Heavy-Duty Diesel Engine” SAE Paper 2001-01-0195
- Dürnholz M. Endres H. Frisse P. “Preinjection: A Measure to Optimize the Emission Behaviour of DI-Diesel Engines” SAE Paper 940674
- Badami M. Mallamo F. Millo F. Rossi E.E. “Influence of Multiple Injection Strategies on Emissions, Combustion Noise and BSFC of a DI Common Rail Diesel Engine” SAE Paper 2002-01-0503
- Heywood J.B. ‘Internal Combustion Engine Fundamentals’ McGraw-Hill 1988