This content is not included in your SAE MOBILUS subscription, or you are not logged in.
Occupant Protection from Cargo in Armored Vehicles
ISSN: 0148-7191, e-ISSN: 2688-3627
Published April 11, 2005 by SAE International in United States
Annotation ability available
Inadequately restrained cargo is a problem in a wide range of vehicles, from passenger cars to heavy trucks. In a crash, the force needed to restrain the cargo is many times the weight of the cargo itself. In a passenger vehicle this means that the barrier between the cargo and the occupants must be capable of preventing the cargo from entering the passenger compartment. In heavy trucks, cargo restraints are generally used to prevent the shifting of cargo that could affect the stability of the truck and to keep the cargo on, or in, the truck during normal driving maneuvers.
A somewhat unique problem occurs in the armored security vehicle. These vehicles are often used to transport very heavy, dense, valuable cargo. More specifically, this cargo is often coin and/or boxes containing paper currency. In many cases this cargo, which may exceed 2268 kilograms (5000 pounds), is carried in the same compartment as personnel. Without a restraint or barrier capable of withstanding the loads generated by this cargo, occupants are placed at risk of serious injury from this shifting payload, especially during crash events. In order to protect these occupants, the cargo restraint or barrier must be able to prevent the cargo from entering the occupant's space and not allow the components of the vehicle or the barrier itself from loading the occupant during foreseeable crash events.
The capability of one type of cargo restraint used in these vehicles was analyzed and tested in a 30 mph frontal barrier test and found to be inadequate to prevent cargo from moving into the occupant's space. Alternative cargo restraints and barriers were considered and analyzed. One design was selected and a prototype was fabricated and tested in a simulated frontal 30 mph crash on a horizontal accelerator (sled) with the same cargo as was used in the first test. This improved design remained in place and kept the cargo away from the occupant's space and thereby would have prevented any injury to the occupant from the cargo. This program demonstrates the type of cargo barrier needed to restrain dense cargos, such as coins, and protect personnel from injury due to shifting cargo. These concepts have application in all types of vehicles.
CitationYannaccone, J., Cantor, A., Eisentraut, D., Denham, W. et al., "Occupant Protection from Cargo in Armored Vehicles," SAE Technical Paper 2005-01-0879, 2005, https://doi.org/10.4271/2005-01-0879.
SAE 2005 Transactions Journal of Commercial Vehicles
Number: V114-2 ; Published: 2006-02-01
Number: V114-2 ; Published: 2006-02-01
- Schaper, D. and Zech, G., Cargo Retention in Passenger Cars Under Accident Conditions, Society of Automotive Engineers, Paper Number 860206, Warendale, PA 1986.
- Byard, R.W, Bourne, A.J. and James, R., Childhood Deaths and Cargo Barriers in Cars, J. Pediatric Child Health (1999) 35, 409-410.
- Bacon, D.G.C. and Gazeley, I., Load Restraint for the Protection of Occupants in Light Vans Including Car Derivatives, Tenth International Technical Conference on Experimental Safety Vehicles, Oxford, England, July, 1985.
- E/ECE/324 & E/ECE/TRANS/505 Rev. 1/Add. 16/Rev.4 Regulation 17 Annex 9.
- Swedish Standard 2562, September 15, 1983, Issued by Swedish Standards Institute, Stockholm, Sweden.
- Code of Federal Regulations, 49 CFR, Part 392, October 2003.
- Code of Federal Regulations, 49 CFR, Part 393, October 2003.
- Avallone, E. A., and Baumeister, T., III, Marks' Standard Handbook for Mechanical Engineers, Ninth Edition McGraw-Hill Book Company, 1987
- Eiband, A.M. Human Tolerance to Rapidly Applied Acceleration, (NASA Memo No. 5-19-59E). Washington, DC., 1959.