This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Impact of Aging and NOX/Soot Ratio on the Performance of a Catalyzed Particulate Filter for Heavy Duty Diesel Applications
Technical Paper
2005-01-0663
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Particulate filters are currently the method of choice for reducing soot levels in diesel exhaust to the extremely low levels required for meeting future emission standards. For cost effective, reliable and manageable soot regeneration, the Catalytic Diesel Particulate Filter (CDPF) has proven to be one of the most promising solutions for maintaining filter performance. The activity of the CDPF can help lower soot ignition temperature thereby promoting active, oxygen-based filter regeneration. It can also facilitate passive regeneration of a filter at temperatures below 400 °C through formation of NO2 by catalyzing the oxidation of NO.
There are two important factors which affect the passive regeneration of a CDPF. One is the influence of NOX/soot ratio. The other is the deterioration of the catalytic function upon aging. Together they determine the quantity of NO2 available for soot oxidation.
In the first part of this publication the impact of model gas, engine and field aging on the catalytic performance of a state of the art CDPF (A) and newly developed CDPF (B) will be reported. A correlation is developed between aging methods and the thermal durability of these two CDPF technologies.
In the second part of this paper the influence of NOX concentration on the regeneration of diesel particulate filters will be investigated on a heavy duty engine bench. Both coated and uncoated filters in fresh and aged state will be evaluated at temperatures typical of passive NO2 and oxygen-based soot regenerations.
Recommended Content
Authors
Topic
Citation
Soeger, N., Mussmann, L., Sesselmann, R., Leippe, G. et al., "Impact of Aging and NOX/Soot Ratio on the Performance of a Catalyzed Particulate Filter for Heavy Duty Diesel Applications," SAE Technical Paper 2005-01-0663, 2005, https://doi.org/10.4271/2005-01-0663.Also In
Diesel Exhaust Emission Control and Modeling on CD-ROM from the SAE 2005 World Congress
Number: SP-1981CD; Published: 2005-04-11
Number: SP-1981CD; Published: 2005-04-11
References
- Gieshoff J. Pfeifer M. Schäfer-Sindlinger A. Hackbarth U. Teysset O. Colignon C. Rigaudeau C. Salvat O. Krieg H. Wenclawick B. W. “Regeneration of Catalytic Diesel Particulate Filters” SAE paper 2001-01-0907
- Vergeer H.C. Lawson A. Jones W. M. Robinson W. SAE paper 860133
- Johnson T.V. “Diesel Emission control: 2001 in Review” SAE 2002-01-0285
- Kimura K. Alleman T. L. Chatterjee S. Hallstrom Kevin “Long-Term Durability of Passive Diesel Particulate Filters on Heavy-Duty Vehicles SAE 2004-01-0079
- Spurk P. Pfeifer M. Setten B.v. Soeger N. Hohenberg G. Gietzelt C. Garr G. Bailey O. “Examination of Engine Control Parameters for the Regeneration of Catalytic Activated Diesel Particulate Filters in Commercial Vehicles” SAE 2003-3177
- van Setten B. “Development of a Liquid Catalyst for Diesel Soot Oxidation - from Powder to Prototype” Delft University of Technology 2001
- Lee C. Miller Morgan M.D. “Basic Principles of Computed Tomography” Lippincott Williams and Wilkins 1983
- Lamacchia S. Pidria M.F. Faraldi P. Corrias S. “Detection of Ash and Particulate Distribution in Diesel Particulate Filters Through X-ray Computed Tomography” Barcelona, Spain 2004 Paper No.F2004V162
- Ertl G. “Handbook of Heterogeneous Catalysis” 2 Wiley-VCH Weinheim 1997
- Crocoll M. “Modellierung und Simulation der Pt-katalysierten NO-Oxidation in sauerstoffreichen Abgasen” Universität Karlsruhe 2003