This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Residual Stresses in Radial and Indentation Forging of Tubes
Technical Paper
2005-01-0510
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Radial forging and indentation forging processes are two processes used for sizing and/or internal profiling of tubes. In this paper, the two processes are simulated using finite element method and their results are compared with Experimental results. The purpose of this paper is to compare the pattern of residual stresses in both processes.
Recommended Content
Aerospace Material Specification | Steel Bars and Rogings Corrosion and Moderate Heat Resistant 12.5cr 1.9ni Annealed |
Technical Paper | Corner Design in Deep Drawn Rectangular Parts |
Technical Paper | Development and Optimization of an Aluminum Forming Process Using Finite Element Analysis as a Tool to Perform Parametric Studies |
Authors
Citation
Bihamta, R., Ameli, A., Movahhedy, M., and Mashregi, A., "Residual Stresses in Radial and Indentation Forging of Tubes," SAE Technical Paper 2005-01-0510, 2005, https://doi.org/10.4271/2005-01-0510.Also In
References
- Jang, D. Y. Liou, J. H. Study of stress development in axi-symmetric products produced by radial forging using a 3D nonlinear finite element method Journal of Materials Processing Technology 74 1998 74 82
- Pugh H.L.D Low, A.H. The hydrostatic extrusion of difficult metals Journal of institute of Metals 93 1964 201 17
- Inoue N. Nishihara M. Hydrostatic extrusion theory and application London Elsevier Applied Science 1985
- Kudo, H. Shinozaki, K. Extrusion of hollow components with additional tension Annals of C.I.R.P 18 1980 327 33
- Alexander J.M. Lengyel B. Hydrostatic extrusion Mills and Boon 1971
- Avitzure, B. Hahn, W.C. Mori. M. Analysis of combined backward-forward extrusion Journal of Engineering for industry 98 1976 438 445
- Chitkara, N.R. Aleem, A. Extrusion of axi-symmetric tubes from hollow and solid circular billets:a generalized slab method of analysis and some experiments International Journal of Mechanical Sciences 43 2001 1661 84
- Thompson E. G. Hamzeh Osama Jackman L. A. Srivatsa S. K. A Quasi-Steady-State Analysis for Radial Forging Journal of Materials Processing Technology 34 1992 1 8
- Lahoti, G. D. Liuzzi, L. Altan, T. Design of Dies for Radial Forging of Rods and Tubes Journal of mechanical working Technology 1 1977 99 109
- Rauschnabel, E. Schmidt, V. Modern application of radial forging and swaging in the automotive industry Journal of Materials Processing Technology 35 1992 371 383
- Male A.T. Cockroft. M.G. A method for the determination of friction of metals under conditions of bulk plastic deformation Journal of the Institution of metals 93 1964/1965 38 45
- Lee, C.H. Altan, T. Influence of flow stress and friction upon metal flow in upset of rings and cylinders Journal of Engineering for Industry 94 1972 775 82
- Lahoti, G. D. Altan, T. Analysis of the radial forging process for manufacturing rods and tubes Journal of Engineering for Industry 98 1976 265 271
- Uhlig A. “deformation energy and tool forces in an idealized radial forging process“” Metal 19 1965 322
- Domblesky, J.P. Shivpuri, R. Painter, B. Application of the finite element method to the radial forging of large diameter tubes Journal of Materials Processing Technology 49 1995 57 74
- Domblesky, J.P. Shivpuri, R. Development and validation of a finite element model for multiple-pass radial forging Journal of Materials Processing Technology 55 1995 432 441