This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Corner Design in Deep Drawn Rectangular Parts
Annotation ability available
Sector:
Language:
English
Abstract
The influence of die corner geometry on the attainable draw depth of rectangular parts was investigated using 3-D FEM and optimum rectangular blanks. Axisymmetric cup analysis was not adequate because a corner assist effect promotes corner draw. Guidelines for selecting corner radius were developed and the sensitivities of the maximum part depth to other process variables, such as drawbead restraint force; die clearance gap; friction coefficient; strain rate sensitivity; material anisotropy; and strain hardening exponent, were simulated. The results are much more conservative than handbook rules, which to not to take into account the details of blank size, drawbead restraint, die geometry, material properties, and friction.
Recommended Content
Citation
Wong, C., Wagoner, R., and Wenner, M., "Corner Design in Deep Drawn Rectangular Parts," SAE Technical Paper 970437, 1997, https://doi.org/10.4271/970437.Also In
References
- Fratini, L. Lo Casto, S. Micari, F. 1995 “Deep drawing of square boxes: Analysis of the Influence of Geometrical Parameters by Numerical Simulations and Experimental Tests,” Simulation of Materials Processing: Theory, Methods and Applications Shen Dawson Balkema, Rotterdam 705 709
- Iwata, N. Matsui, M. Gotoh, M. 1992 “An Elastic-plastic FEM Analysis of Square-Cup Drawing Process,” Proceedings of the Third International Conference on Computational Plasticity, Fundamentals and Applications, Part II Owen, D.R.J. Onate, E. Hinton, E. Pineridge Press Swansea 1311 1320
- Belingardi, G. Goglio, L. 1992 “Simulation of Square Box Deep Drawing Using an Explicit Code: Numerical and Experimental Results,” Proceedings of the Third International Conference on Computational Plasticity, Fundamentals and Applications, Part II Owen, D.R.J. Onate, E. Hinton, E. Pineridge Press Swansea 1321 1332
- Makinouchi, A. Nakamachi, E. Onate, E. Wagoner, R.H. 1993 Proceedings of The 2nd International Conference, NUMISHEET '93, Numerical Simulation of 3-D Sheet Metal Forming Processes Isehara, Japan
- Cope, S.R. 1953 “You Can Draw Rectangular Shells by Following Certain Rules,” American Machinist 97 156 159
- Die Design Handbook, Third Edition 1990 Smith, D.A. Society of Manufacturing Engineers
- Eary, D.F. Reed, E.A. 1974 Techniques of Pressworking Sheet Metal Prentice-Hall New Jersey
- Gopinathan, V. 1977 “Optimum Blank Profile Determination for Rectangular Deep Drawing,” Indian Journal of Technology 330 333
- Waller, J.A. 1978 Press Tools and Presswork Portcullis Press
- Doege, I.E. 1985 “Prediction of Failure in Deep Drawing,” Computer Modeling of Sheet Metal Forming Process: Theory, Verification and Application Wang, N.M. Tang, S.C. AIME Press 209 224
- Hsu, T.C. Lee, S.Y. 1976 “A Definition of Drawability and Its Relation to Deformation in the Drawing of Square Cups,” Journal of Testing and Evaluation, JTEVA 4 5 340 346
- Hsu, T.C. Lee, S.Y. 1977 “On the Drawability of Sheet Metal in Noncircular Cups,” Journal of Engineering for Industry 615 619
- Thomson, T. R. 1975 “Influence of Material Properties in the Forming of Square Shells,” Journal of the Australian Institute of Metals 20 2 106 113
- El-Wakil, S.D. Kamal, M.N.E.M. Darwish, A.H. 1980 “Mechanics of the Square Box Drawing Operation of Aluminum Blanks,” Sheet Metal Industries 679 689 759
- Majlessi, S.A. Lee, D. 1993 “Deep Drawing of Square-Shaped Sheet Metal Parts, Part 2: Experimental Study,” Journal of Engineering for Industry 115 110 117
- Yoshida, K. Yoshii, K. Komorida H. Miyauchi K. 1978 “Fracture Behaviour, Forming Severity and Metal Flow in Deep Drawing of Irregular Shape Shells,” Sci. Papers of the Inst. of Phys. and Chem. Res. 72 3 115 124
- Kawai, N. Mori, T. Hayashi, H. Kondoh, F. 1987 “Effects of Punch Cross-Section on Deep-Drawability of Square Shell of Aluminum Sheet,” Journal of Engineering for Industry 109 355 361
- Mori, T. Marumo, Y. 1990 “A Systematic Approach to Improving Square Shell Drawability,” Advanced Technology of Plasticity 1990 3 1179 1184
- Kobayashi, S. 1985 “Deformation Analysis and Blank Design in Square Cup Drawing,” Advanced Systems for Manufacturing SME 285 294
- Kim, N. Kobayashi, S. 1986 “Blank Design in Rectangular Cup Drawing by an Approximate Method,” Int. J. Mach. Tool Res. Des. 26 125 135
- Assempoor, A. Karima, M. 1992 “Interaction of Part Geometry and Material Properties with Forming Severity and Tooling Design for Box-Shaped Stampings” SAE Paper 920438 Autobody Stamping Applications and Analysis 105 113
- Gloekl, H. Lange, K. 1983 “Computer Aided Design of Blanks for Deep Drawing Irregular Shaped Components,” Proceedings of 11th NAMRC SME 243 251
- Vogel, J.H. Lee, D. 1990 “An Analysis Method for Deep Drawing Process Design,” International Journal of Mechanical Sciences 32 891 907
- Majlessi, S.A. Lee. D. 1993 “Deep Drawing of Square-Shaped Sheet Metal Parts, Part 1: Finite Element Analysis,” Journal of Engineering for Industry 115 102 109
- Doege, I.E. Schulte, S. 1992 “Design of Deep Drawn Components with Elementary Calculation Methods,” Journal of Materials Processing Technology 34 439 447
- Doege, I.E. Boinski, F. 1994 “Computer-aided Design and Calculation of Deep Drawn Components,” Journal of Materials Processing Technology 46 321 331
- Walker, T. Kolodziejski, J. Karima, M. 1992 “Using Axisymmetric Solutions to Estimate the Forming Severity of Three Dimensional Metal Stampings,” SAE Paper 920636 Autobody Stamping Applications and Analysis 161 172
- Germain, Y. Chung, K. Wagoner, R.H. 1989 “A Rigid Visco-Plastic Finite Element Program for Sheet Metal Analysis,” International Journal of Mechanical Sciences 31 1 24
- Keum, Y.T. Nakamachi, E. Wagoner, R.H. Lee, J.K. 1990 “Compatible Description of Tool Surfaces and FEM Meshes for Analyzing Sheet Forming Operations,” International Journal of Numerical Methods in Engineering 30 1471 1502
- Zhou, D. Wagoner R.H. 1993 “Development and Application of Sheet Forming Simulation” NUMISHEET '93 eds Makinouchi A. Nakamachi E. Onate E. Wagoner R.H. The Institute of Physical and Chemical Research 3 18
- Zhou, D. Wagoner R.H. 1994 “An N-CFS Algorithm for Sheet Forming FE Modelling” Metal Forming Process Simulation Industry Vol II Druckerei GmbH Monchengladbach, Germany 57 74
- Zhou, D. Wagoner R.H. 1995 “Development and Application of Sheet Forming Simulation” J. Mat. Proc. Technol. 50 1 16
- Saran, M.J. Wagoner, R.H. 1991 “A Consistent Implicit Formulation for Nonlinear Finite Element Modeling with Contact and Friction, Part 1 - Theory,” Journal of Applied Mechanics 58 499 506
- Saran, M.J. Wagoner, R.H. 1991 “A Consistent Implicit Formulation for Nonlinear Finite Element Modeling with Contact and Friction, Part 2 - Numerical Verification and Results,” Journal of Applied Mechanics 58 507 512
- Wagoner, R.H. Chan, K.S. Keeler, S.P. 1989 Forming Limit Diagrams: Concepts, Methods, and Applications TMS Warrendale, Pennsylvania
- Lee, J.K. Kinzel, G.L. Wagoner R.H. 1996 NUMISHEET '96 Ohio State University
- Wenner, M.L. 1992 “Elementary Solutions and Process Sensitivities for Plane-Strain Sheet-Metal Forming,” Journal of Applied Mechanics 59 S23 28