This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Crash Performances of Advanced High Strength Steels of DP780, TRIP780 and DP980
Technical Paper
2005-01-0354
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Advanced high strength steels (AHSS), such as dual phase (DP) and transformation induced plasticity (TRIP) steels, have been increasingly used in automotive industry. One of the major advantages of AHSS is the excellent crash energy absorption capability. In this study, crash performances were evaluated for four AHSS including DP980, DP780, TRIP780 (780T), and TRIP590 (590T). Axial crush and bending crush tests were performed to evaluate the material crush performance. High strain rate tension test results for those materials were also presented. FEA analyses with parameter sensitivity studies were conducted including strain rate sensitivity effect, part geometry effects, welding models and forming effects. Good correlations between simulation and experimental data were achieved.
Recommended Content
Authors
Citation
Chen, X., Shi, M., Chen, G., Kamura, M. et al., "Crash Performances of Advanced High Strength Steels of DP780, TRIP780 and DP980," SAE Technical Paper 2005-01-0354, 2005, https://doi.org/10.4271/2005-01-0354.Also In
Advances in Modeling and Testing of Materials and Vehicle Structures for Crash Safety Applications
Number: SP-1955; Published: 2005-04-11
Number: SP-1955; Published: 2005-04-11
References
- Kamura Manabu Omiya Yoshinobu Shaw Jody Chen Ming “Formability and Spring Back Characterization of Advanced High Strength Steel” SAE Technical Paper # 2003-01-0522 2003
- Chen X.M. Witmer D.A. Kamura M. Omiya Y. “Metal Forming Characterization and Simulation of Advanced High Strength Steels” SAE Technical Paper # 2004-01-0564
- Chen X.M. Shi M.F. “Applications of High Strength Steels in Hydroforming: Dual Phase vs. HSLA” SAE Technical Paper # 2001-01-1133 2001
- Chen X. M. Drouin J.J. Coopmans D.R. Dell'Osso R. Belanger P.J. “Stamping and Crash Performance of Dual Phase Steel” International Body Engineering Conference (IBEC) 2001, SAE Technical Paper # 2001-01-3074
- Shi M.F. Thomas G.H. Chen X.M. Fekete J.R. “Formability Performance Comparison between Dual Phase and HSLA Steels” Proc. of 43 rd Mechanical Working and Steel Processing Conference 165 174 XXXIX 2001 Iron & Steel Society October 2001
- Fekete J.R. Stibich A.M. Shi M.F. “A Comparison of the Response of HSLA and Dual Phase Sheet Steel in Dynamic Crush” International Body Engineering Conference (IBEC) 2001, SAE Technical Paper # 2001-01-3101
- Konieczny A. “On Formability Assessment of Automotive Dual Phase Steels” International Body Engineering Conference (IBEC) 2001, SAE Technical Paper # 2001-01-3075
- Shaw J.R. Watenabe Chen X.M. “Metal Forming Characterization and Simulation of Advanced High Strength Steels” SAE Technical Paper # 2001-01-1139 2001
- Link Todd “Tensile-Shear Spot Fatigue Behavior of High Strength Steel” 45 th MWSP Conference Proceedings 2003 XLI 45 358
- Chen G. Chen X.M. Shi M.F. Kalpundi G. Wehner T. Yarlagadda R. “Material and Processing Modeling of Dual Phase Steel Front Rails for Crash,” International Conference on Advanced High Strength Sheet Steels for Automotive Applications Proceedings Winter Park, Colorado 2004 161 170
- ULSAB-AVC Advanced Vehicle Concepts Technical Transfer Dispatch #6 - ULSAB-AVC Body Structure Materials 2001
- Abramowicz W. Wierzbicki T. “Axial Crushing of multicorner sheet metal columns” Journal of Applied Mechanics 1989 56 113 20
- Simunovic S. Kumar P. Nukala V.V. Fekete J. Meuleman D. Milititsky M. “Modeling of Strain Rate Effects in Automotive Impact,” SAE paper 2003-01-1383 2003