This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Estimation of the Mean Value Engine Torque Using an Extended Kalman Filter
Technical Paper
2005-01-0063
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Modern ECUs are usually torque orientated. As a consequence, a good estimation of the real mean value output torque of the engine is needed. As torque measurement is mostly too expensive, the ECUs usually include torque estimation algorithms, which, however, are usually quite simple and give a poor estimate of dynamic effects. In this paper we present a simple but effective method to estimate the engine torque based on an extended Kalman filter used in combination with a polynomial engine model and a simple friction model. Using only standard measurements or ECU internal variables, like fuel mass, spark advance for gasoline engines and injection timing for diesel engines, pressure of the intake manifold and speed are enough to get a good estimation value for the mean value torque of the engine. In this paper we also discuss the algorithm of estimating the mean value torque of the engine that is mounted in a vehicle, where usually the load torque is not known. The resulting engine torque is a dynamical torque signal that can be used as base for several control loops that are implemented in the ECU. The method was tested and implemented on a BMW M47D diesel engine mounted on a dynamical test bench.
Recommended Content
| Technical Paper | Indicated Torque Estimation Using a Torsional Behavior Model of the Engine |
| Technical Paper | A High Resolution Real-Time Model of a Diesel Engine |
Authors
Topic
Citation
Grünbacher, E., Kefer, P., and del Re, L., "Estimation of the Mean Value Engine Torque Using an Extended Kalman Filter," SAE Technical Paper 2005-01-0063, 2005, https://doi.org/10.4271/2005-01-0063.Also In
References
- Falcone P. de Gennaro M. C. Fiengo G. Santini S. Glielmo L. Langthaler P. Torque generation model for Diesel Engine 42nd IEEE Conference on Decision and Control December 9-12 2003 Hawaii, USA
- Kiencke U. Nielsen L. Automotive Control Systems for Engine, Drivelin and Vehicle Springer 3-540-66922-1 2000
- Shiao Y. Moskwa J.j: Cylinder pressure and combustion heat release estimation using nonlinear sliding observers IEEE Transactions on Controls System Technology 3 1 1995
- Haskara I. Mianzo L. Real-time cylinder pressure and indicated torque estimation via second order sliding modes Procedings of the American Control Conference Arlington, VA June 25-27 2001
- Gyan P. Ginoux S. Champoussin J.C. Guezennec Y. Crankangle Based Torque Estimation: Mechanistic/Stochastic SAE Technical Paper 2000-01-0559
- Lee B. Rizzoni G. Guenzennec Y. Soliman A. Cavalletti M. Waters J. Engine Control Using Torque Estimation SAE Technical Papers 2001-01-0995
- Ball J. K. Bowe M. J. Stone C. R. McFadden P. D. Torque Estimation and Misfire Detection using Block Angular Acceleration SAE Technical Paper 200-01-0560
- Winsel T. Ayeb M. Lichtenthäler D. Theuerkauf H. J. A Neural Estimator for Eylinder Pressure and Engine Torque SAE Technical Paper 1999-01-1165
- Wei X. del Re L. LPV Identification of a Diesel Engine Torque Model 13th IFAC Symposium of System Identification August 27-29 2003 Rotterdam, Netherlands 1448 1453
- Grünbacher E. Langthaler P. Steinmaurer G. del Re L. Kokal H. Adaptive Inverse Torque Control of a Diesel Engine using Adaptive Mapping Update SAE World Congress 2003 March 3-6 2003 Detroit, Michigan, USA
- Guzella L. Amstutz A. Control of Diesel Engines IEEE Control Systems Magazine 18 53 71 Oct 1998
- Siouris George M. “An engineering approach to optimal control and estimation theory” John Wiley & Sons 0-471-12126-6 1996
- Jensen J.P. Kristensen A.F. Sorenson S.C. Houbak N. Hendricks Mean value modeling of a small turbocharged diesel engine SAE Paper 910070
- Blair G. P. 1999 Design and simulation of four-stroke engines SAE International 0-7680-0440-3
- Fischer G. D. Expertenmodell zur Berechnung der Reibungsverluste von Ottomotoren; Technische Universität Darmstadt - Fachbereich Maschinenbau 3-89825-060-1 2000
- Scillieri J. J. Buckland J. Freudenberg J. S. Use of Feedforward in Idle Speed Control for a Direct Injection Spark Ignition Engine During Lean Burn Proceedings of the American Control Conference 1419 1424 2002