This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Numerical and Experimental Study of Fuel and Air Flow in Carburetors for Small Engines
Technical Paper
2004-32-0053
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
This work presents a complete model of the carburetor for small engines. It extends the previously published models by incorporating a detailed review of two-phase flow pressure drop, the effect of the fuel well on the control of airbleed flow, and unsteady flow. The homogenous two-phase flow model, which is commonly used in carburetor modeling, was compared with an empirical correlation derived from experiments in small pipes and found to be in poor agreement. In order to assess unsteady flow conditions, the model was extended by solving instantaneous one-dimensional Navier-Stokes equations in single-phase pipes. This strategy proved successful in explaining the mixture enrichment seen under pulsating flow conditions. The model was also used to derive a sensitivity analysis of geometries and physical properties of air and fuel.
Recommended Content
Technical Paper | CFD Analysis of Flow Field and Pressure Losses in Carburetor Venturi |
Technical Paper | Analysis and Digital Simulation of Carburetor Metering |
Technical Paper | An Approach to Altitude Compensation of the Carburetor |
Authors
Citation
Arias, D. and Shedd, T., "Numerical and Experimental Study of Fuel and Air Flow in Carburetors for Small Engines," SAE Technical Paper 2004-32-0053, 2004, https://doi.org/10.4271/2004-32-0053.Also In
References
- Heywood, John Internal combustion engine fundamentals McGraw-Hill Inc. New York 1990
- Harrington, D. L. Bolt, J. A. Analysis and digital simulation of carburetor metering SAE 700082 1970
- Szczecinsky, J. Rychter, T.J. Theoretical analysis of mixture stoichiometry in engine carburetor Warsaw University of Technology Warsaw, Poland SAE 910078 1991
- Sendyka, B. Filipczyk Simulation of the characteristic on a carburetor of an internal combustion engine SAE 950987 1995
- Benson, R. S. Baruah, P. C. Sierens, R. Steady and non-steady flow in a simple carburettor Proc. of the Institution of Mechanical Engineers 188 53 537 548 1974
- Bajema, D. L. Gatecliff, G. L. Prediction and measurement of fluid flow in single cylinder engine carburetors SAE 780285 1978
- Gamma Technologies GT-Power: User's manual and tutorial 2001
- Wu, B. Feng, Y. Liu, J. Numerical simulation of gas-liquid two-phase flow in motorcycle carburetor Proceedings of the International Symposium on Multiphase Flow ISMF 1997 Beijing, China
- Van Werven, M. Van Maanen, H. R. E. Ooms, G. Azzopardi, B. J. Modeling wet-gas annular/dispersed flow through a venturi AIChE Journal 49 6 1383 1391 2003
- Lenz, H. D. Mixture formation in spark-ignition engines Springer-Verlag 1990
- Woods, W. A. Goh, G. K. Compressible flow through a butterfly throttle valve in a pipe Proc. Institution of Mechanical Engineers 193 237 244 1979
- Ehara, M. Kinabara, Y. Shinoda, K. Meguro, T. Ishihara, T. A study of carburetor design SAE 805142 1980
- Bolt, J. A. Boerma, M. The influence of inlet air conditions on carburetor metering SAE 660119 1966
- Brereton, G. J. De Araujo, A. Bertrand, E. Effects of ambient conditions on the emissions of a small carbureted four-stroke engine SAE 961739 1996
- Asano, Y. Chuma, T. Haga, H. Mochida, T. Effects of air-bleed systems on carburetor performance Bulletin of JSME 11 46 691 698 1968
- Shinoda, K. Koide, H. Yii, A. Analysis and experiments on carburetor metering at the transition region to the main system SAE 710206 1971
- Furuyama, M. Fuel supply characteristics in the transition region of fixed-venturi type carburetor Bulletin of JSME 24 191 842 848 1981
- Moss, P. J. Pulsation enrichment in carburettors Automotive Engineer 5 4 53 56 1980
- Bolt, J. A. Derezinski, S. J. Harrington, D. L. Influence of fuel properties on metering in carburetors SAE 710207 1971
- Wallis, G. B. One-dimensional two-phase flow McGraw Hill 1969
- Oya, T. Upward liquid flow in small tube into which air streams (1 st report, experimental apparatus and flow patterns) Bulletin of JSME 14 78 1320 1329 1971
- Oya, T. Upward liquid flow in small tube into which air streams (2 nd report, empirical correlation) Bulletin of JSME 14 78 1330 1339 1971
- Hosho, Y. Flow quantities of air introduced through air bleeds into carburetors and pulsation fuel jet phenomena Hitachi Review 16 4 173 178 1967
- White, F. M. Fluid Mechanics McGraw Hill 1999
- Harrington, D. L. Analysis and digital simulation of carburetor metering Ph.D. Thesis University of Michigan 1968
- Klein, S. A. Development and integration of an equation-solving program for engineering thermodynamic courses Computer Applications in Engineering Education 1 3 265 275 1993
- Warnatz, J. Mass, U. Dibble, R. W. Combustion Springer 2nd 1999