This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Development of a Two-Cylinders-Two-Stroke Gasoline-Direct-Injected Engine
Technical Paper
2004-32-0042
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Recently, emission regulations formerly concentrated on the acknowledged major polluters, such as motor vehicle engine, have been extended to the smaller engines.
This forced the two-stroke engines manufacturers to search for environmentally cleaner solutions. In this respect the most promising technology seems to be the adoption of direct-injection and the challenge is not to complicate excessively a power system which has in simplicity and low cost its best advantages.
The paper reports on a two-stroke gasoline direct-injection engine prototype which even if equipped with a low-pressure fuel pump, provides high injection pressure values thanks to a Water-Hammer effect.
The engine is a two-cylinders-water-cooled type and its design follows previous experiences on single-cylinder engines prototype.
Once described the basic working principles of the proposed concept the engine realization phases and its running results on a test bed are presented.
Recommended Content
Authors
Topic
Citation
Bartolini, C., Caresana, F., and Pelagalli, L., "Development of a Two-Cylinders-Two-Stroke Gasoline-Direct-Injected Engine," SAE Technical Paper 2004-32-0042, 2004, https://doi.org/10.4271/2004-32-0042.Also In
References
- Bartolini C. M. Caresana F. Vincenzi G. 1996 “Direct Injection in Two-Stroke Spark-Ignition Engines: Some Proposals and Researches” SAE paper n. 961710 - Powerplants of the Future (SP-1187) 47 55 1996
- Bartolini C. M. Caresana F. Vincenzi G. 1998 “Experimental analysis of a New Water Hammer Gasoline Direct Injection System (WH-GDIS)” SAE paper n. 981936 , SP-1376, 1998 SAE FTT Future Transportation Technology Conference and Exposition Costa Mesa, California, USA August 11-13 1998
- Bartolini C. M. Caresana F. Vincenzi G. 1999 “A Two-Stroke Engine Prototype Equipped with the Water-Hammer Gasoline Direct-Injection System (WH-GDIS) ASME - ICE Technical Conference Fall 1999 Ann Arbor, Michigan October 16-20 1999
- Bartolini C. M. Caresana F. Vincenzi G. 2001 “Experimental Analysis of a Two-Stroke Injection Engine Prototype” Small Engine Technology Conference and Exhibition I 551 556 Pisa 28-30 November 2001
- Bartolini C. M. Caresana F. Pelagalli L. 2003 “Experimental Results from a Two-Stroke Gasoline Direct-Injected Engine Prototype” Paper n. ICES2003-557 - ASME Internal Combustion Engine Division - 2003 Spring Technical Conference Salzburg, Austria May 11-14 2003
- Kuentsher V. Olbrich C. Baumgaertel C. 1980 “A Two Stroke Engine with Charge Stratification and Electronically Controlled Pressure Impact Injection” Proceedings “Conference on stratified charge automotive engines” 2 77 81 The Institution of Mechanical Engineers London 25th 26th Sept. 1980
- Kuentsher V. 1983 “Charge Stratification and Lean Mixture Combustion in Two-Stroke Otto Cycle Engines by means of Electronically Controlled Pressure Impact Injection” ISATA Proceedings 1983 1 225 244
- Kuentsher V. 1986 “Application of Charge Stratification, Lean Burn Combustion Systems and Anti-Knock control Devices in Small Two-Stroke Cycle Gasoline Engines” SAE Paper 860171 International Congress and Exposition Detroit, Michigan February 1986
- Stan C. 1993 “Concepts for the Development of Two-Stroke Engines” Proceedings of the “Small Engine Technology Conference” 1 61 69 Pisa 1st 3rd December 1993
- Stan C. Stanciu A. Guenther S. Martorano L. Tarantino C. Antonelli M. 2001 “Direct Injection Application on a Four-Stroke Motorcycle Engine” Small Engine Technology Conference and Exhibition, Technical papers I 551 556 Pisa 28-30 November 2001