This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Influence of Spot Weld Modeling on Finite Elements Results for Normal Modes Vibration Modes of a Trimmed Vehicle Body
Technical Paper
2004-01-3358
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Simulation tools usage in the automotive industry has faced a significant increase in the last decade, due to the significant advantages of time and cost reduction opportunities it can potentially provide. Therefore new modeling techniques are constantly developed in order to increase the correlation between simulated and physical test results. In particular, modeling of spot welds plays a very important role in defining the accuracy of a finite element model, mainly with large models, such as a complete trimmed body, have to be dealt with. The properties of a welded set depends on a significant number of variables, such as the temperature during welding, the compression load created by the welding probe and geometric variation of the nugget position. Although it is not possible to take all those variables into account in a finite elements model, a good modeling strategy should produce acceptable results even when those are neglected or only modeled in an approximate way. This work compares three spot welds modeling strategy with respect to their performance on a normal vibration modes analysis. The first strategy consists of representing the spot-weld as a common node between the bonded shells; the second one uses rigid elements as connection and in the third one the weld nugget is modeled as a solid element. The results for the three techniques are discussed and compared with physical testing in order to identify the more accurate one for normal modes analysis.
Recommended Content
Citation
Silva, I. and Magalhães, M., "Influence of Spot Weld Modeling on Finite Elements Results for Normal Modes Vibration Modes of a Trimmed Vehicle Body," SAE Technical Paper 2004-01-3358, 2004, https://doi.org/10.4271/2004-01-3358.Also In
References
- Ford Corporte Engineering Test Procedure 01.01.-C- 406 Static Stiffness Analysis 2004
- Ford Corporte Engineering Test Procedure 01.00.-C- 400 BIP and Trimmed Body modal Analysis 2004
- Geradin, M. Mechanical Vibrations: Theory and Application to Structural Dynamics 2