This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
CVD Diamond Films on WC-Co with a Vanadium Carbide Thermal Diffusion Layer
Technical Paper
2004-01-3295
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
CVD diamond film deposition on WC-Co substrate is the most likely application of diamond CVD technology towards large scale production, due to its suitability to aluminium alloys machining in the automotive and aerospace industry. Several film-substrate interfaces and surface modifications have been developed aiming higher levels of simultaneous diamond film-substrate adherence and substrate surface toughness, however the results are still far bellow industry requirements for widen scale application.
In this work a new interface is introduced in the CVD diamond films technology, which consists of a thermo-reactive deposited and diffused vanadium carbide layer, highly adequate to diamond films deposition on cemented carbide cutting and forming tools. This interface presents good diamond growth characteristics, thermal expansion coefficient similar to the substrate and, in addition, high hardness and mechanical strength. Diamond films quality and interface characteristics are evaluated by SEM images and linescan technique, X ray diffraction and Raman spectroscopy. A typical Raman shift of 4,1 cm−1 is obtained observed, corresponding to a compressive residual stresses of 1,4 GPa applied from the substrate to the CVD diamond film through vanadium carbide interface.
Citation
Barquete, D., Corat, E., and de Moura Neto, C., "CVD Diamond Films on WC-Co with a Vanadium Carbide Thermal Diffusion Layer," SAE Technical Paper 2004-01-3295, 2004, https://doi.org/10.4271/2004-01-3295.Also In
References
- Trava-Airoldi, V.J. Corat, E.J. Baranauskas, V. Low I. M. Advanced Ceramics Tools for Machining Application III Trans Tech Publications Uetikon-Zuerich, Switzerland 1997 195
- Seal, M. Spear, K.E. Dismukes J.P Synthetic Diamond: Emerging CVD Science and Technology John Wiley & Sons, Inc. New York 1994 507
- Polini, R. D’Antonio, P. Casto, S. Lo Ruisi, V.F. Traversa, E. Surf. Coat. Technol 123 2000 78
- Grannen, K.J. Chang, R.P.H. J. Mater. Res 9 1994 2154
- Ilias, S. Campillo, C. Borges, C.F.M. Moisan, M. Diamond Relat. Mater 9 2000 1120
- Lopez, J. Babaev, V.G. Khvostov, V.V. Albella, J.M. J. Mat. Res 13 1998 284
- Fujita, H. Arai, T. Proceedings of 4th International Congress on Heat Treatment of Materials II International Federation for the Heat Treatment of Materials Berlin 1985 1109
- Arai, T. Harper, S. ASM Handbook 4 Heat Treating ASM International USA 1991 448
- Arai, T. Fujita, H. Sugimoto, Y. Ohta, Y. Heat Treatment and Surface Engineering: New Technology and Practical Applications Proc. Conf. ASM International USA 1988 49
- Chicco, B. Borbidge, W.E. Summerville, E. Mater. Sci. and Engineering A266 1999 62
- Krajewski, A. D’Alessio, L. De Maria, G. Cryst. Res. Technol 33 1998 341
- Ferreira, N.G. Abramof, E. Leite, N.F. Corat, E.J TRAVA-AIROLDI, V.J. Diamond Relat. Mater 10 2001 750