This content is not included in your SAE MOBILUS subscription, or you are not logged in.
Three-Dimensional Operational Deflection Shape Analysis of Squealing Disc Brakes
ISSN: 0148-7191, e-ISSN: 2688-3627
Published October 10, 2004 by SAE International in United States
Annotation ability available
In the development of noiseless brakes, investigation of actual vibration and knowledge of the operational deflection shape (ODS) is necessary in order to work out countermeasures methodically. Whereas great progress has been achieved in computer-aided simulation of brake noise, the measurement of the ODS is still problematic. The optical techniques usually employed for identifying the ODS have limitations in measuring all three spatial dimensions and are restricted to visible areas which must not be shaded or hidden inside.
This paper presents an alternative method for measuring the ODS which uses miniature accelerometers placed in the cooling ducts of the disc and rotating with it. Together with a special evaluation procedure, this permits three-dimensional investigation and definite identification of both out-of-plane and in-plane vibration. Especially important is the part of the ODS in the region of the contact disc/pad, which was as yet inaccessible to other techniques. In addition, the method results in a number of other findings which are also discussed (e.g. detection of traveling/stationary waves, quantification of amplitude and frequency fluctuations per revolution). Along with presenting the method based on selected examples, the potentials and problems are discussed and the future prospect of the method is appraised.
|Journal Article||Study of the Mechanism of Accessory Drive Belt Noise|
|Technical Paper||Gear Fault Diagnosis Based on Optimal Morlet Wavelet Filter and Autocorrelation Enhancement|
|Technical Paper||Automatic Detection of Buzz, Squeak and Rattle Events|
CitationMarschner, H. and Rischbieter, F., "Three-Dimensional Operational Deflection Shape Analysis of Squealing Disc Brakes," SAE Technical Paper 2004-01-2796, 2004, https://doi.org/10.4271/2004-01-2796.
SAE 2004 Transactions Journal of Passenger Cars: Mechanical Systems
Number: V113-6; Published: 2005-07-05
Number: V113-6; Published: 2005-07-05
- Kung S.-W. Stelzer G. Belsky V. Bajer A. “Brake Squeal Analysis Incorporating Contact Conditions and Other Nonlinear Effects” SAE Paper 2003-01-3343 , Proceedings of the 21st Annual Brake Colloquium Hollywood, Florida, USA 2003
- Saka H. Wada T. “Study of Brake Squeal - Classification for Vibration Modes of Mounting Bracket” SAE Paper 2003-01-3344 , Proceedings of the 21st Annual Brake Colloquium Hollywood, Florida, USA 2003
- Zhang L. Wang A. Mayer M. Blaschke P. “Component Contribution and Eigenvalue Sensitivity Analysis for Brake Squeal” SAE Paper 2003-01-3346 , Proceedings of the 21st Annual Brake Colloquium Hollywood, Florida, USA 2003
- Ioannidis P. Brooks P. C. Barton D. C. “Drum Brake Contact Analysis and its Influence on Squeal Noise Prediction” SAE Paper 2003-01-3348 , Proceedings of the 21st Annual Brake Colloquium Hollywood, Florida, USA 2003
- Bajer A. Belsky V. Zeng L.-J. “Combining a Nonlinear Static Analysis and Complex Eigenvalue Extraction in Brake Squeal Simulation” SAE Paper 2003-01-3349 , Proceedings of the 21st Annual Brake Colloquium Hollywood, Florida, USA 2003
- Lee L. Lou G. Xu K. Matsuzaki M. Malott B. “Direct finite element analysis on disc brake squeal using the ABLE algorithm” SAE Paper 2003-01-3350 , Proceedings of the 21st Annual Brake Colloquium Hollywood, Florida, USA 2003
- Talbot C. Fieldhouse J. D. “Investigations of In-Plane Disc Vibration Using Laser Holography” SAE Paper 2002-01-2607 , Proceedings of the 20th Annual Brake Colloquium Phoenix, Arizona, USA 2002
- Moser F. Fischer M. Rumold W. “Dreidimensionale Messung von Betriebs-schwingformen quietschender Scheibenbremsen” VDI-Berichte 1736, Reibung und Schwingungen in Fahrzeugen, Maschinen und Anlagen Tagung Hannover, Deutschland 2002
- Krupka R. Walz T. Ettemeyer A. “New Techniques and Applications for 3D-Brake Vibration Analysis” SAE Paper 2000-01-2772 , Proceedings of the 18th Annual Brake Colloquium San Diego, California, USA 2000