This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Computer Aided Valve Plate Design - An Effective Way to Reduce Noise
Technical Paper
2004-01-2621
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The paper presents a new computer based design method for valve plate design using the simulation program CASPAR and the extension tool AVAS. CASPAR is based on a non-isothermal gap flow model considering time dependent gap heights and surface deformations due to high pressure loads for all connected gaps of swash plate axial piston machines. Among others the program allows the prediction of oscillating forces exerted on machine parts and the calculation of effective flow pulsation on both ports as a function of design and operating parameters. Together with the calculated instantaneous cylinder pressure the flow pulsation and oscillating forces can be taken as criterion to evaluate the effectiveness of design measures for noise reduction during the design phase, i.e. before prototype production. The models used in the program have been verified by different measurements on pumps and motors.
Recommended Content
Authors
Citation
Ivantysynova, M., Huang, C., and Christiansen, S., "Computer Aided Valve Plate Design - An Effective Way to Reduce Noise," SAE Technical Paper 2004-01-2621, 2004, https://doi.org/10.4271/2004-01-2621.Also In
References
- Blackman, L.D. 2001 Detailed Dynamic Model for Variable Displacement Pumps - a new approach with Simulink Proc. Recent Advances in Aerospace Actuation Systems and Components Toulouse, France 33 40
- Becher, D. Helduser, S. 2000 Innovative pump design to reduce pressure pulsations of axial pistons pumps Bath workshop on Power Transmission and Motion Control Bath, UK 127 140
- Edge, K. 1999 Designing quieter hydraulic systems - some recent developments and contributions Proc. of the Fourth JHPS International Symposium on Fluid Power Japan 3 27
- Edge, K.A. Johnston D.N. 1990 The secondary source method for measurement of pump pressure ripple characteristics. Part 1 - Description of method Proc Instn Mech Engrs Vol 204 33 40 Part 2 - Experimental results Proc Instn Mech Engrs 204 41 46
- Edge, K. A. Darling, J. 1986 Cylinder pressure transient in oil hydraulic pumps with sliding plate valves Proc. I Mech E Vol. 200 B1 45 54
- Foster, K. Hannan, D.M. 1977 Fundamental fluidborne and airborne noise generation of axial piston pumps Seminar on quiet oil hydraulic systems IMechE London, UK C257/77 29 40
- Haarhaus, M. Haas, H.J. 1985 Untersuchung neuer Wege zur Geräuschminderung bei Axialkolbeneinheiten O+P ölhydraulik und Pneumatik 29 1985 2 96 103 29 1985 3 218 220
- Harris, R.M. et al 1993 Reduction of piston pump cavitation 5th Bath International Fluid Power Workshop Bath, UK 167 183
- Harrison A.M. 1997 Reduction of axial piston pump pressure ripple University of Bath UK
- Huang, C. Ivantysynova, M. 2003 A new approach to predict the load carrying ability of the gap between valve plate and cylinder block Bath Workshop on Power transmission and Motion Control PTMC 2003 Bath, UK 225 239
- Inoue K. Nakazato M. 1993 A new prediction method of operating moment and cylinder pressure of swash plate type axial piston pump Proc. of the second JHPS International Symposium on Fluid Power Tokyo, Japan 361 366
- Ivantysyn J. Ivantysynova M. 2001 Hydrostatic Pumps and Motors Academic Books International New Dehli 81-85522-16-2
- Ivantysynova, M. 1999 A New Approach to the Design of Sealing and Bearing Gaps of Displacement Machines Fourth JHPS International Symposium on Fluid Power Tokyo, Japan 45 50
- Ivantysynova, M. 2001 Energy Losses of Modern Displacement Machines - a new approach of Modelling Proc. of the seventh Scandinavian International Conference on Fluid Power, SCIFP'01 Linköping, Sweden 377 395
- Ivantysynova, M. Huang, Ch. 2002 Investigation of the gap flow in displacement machines considering the elastohydrodynamic effect 5th JFPS International Symposium on Fluid Power Nara Japan 219 229
- Ivantysynova, M. et al 2002 Prediction of swash plate moment using the simulation tool CASPAR ASME International Mechanical Engineering Congress New Orleans, USA
- Ivantysynova, M. 2003 Prediction of pump and motor performance by computer simulation 1st International Conference on Computational Methods in Fluid Power Technology Melbourne November 2003 Australia 505 522
- Jarchow, M. 1997 Maßnahmen zur Minderung hochdruckseitiger Pulsationen hydrostatischer Schrägscheibeneinheiten RWTH Aachen, Germany
- Johansson, A. Blackman, L. D. 2000 Prediction of Pump Dynamics Utilizing Computer Simulation Model - With Special Reference to Noise Reduction SAE International Off-Highway & Powerplant Milwaukee, USA 129 135
- Johansson, A. et al 2001 Cross Angle - A Design Feature for Reducing Noise and Vibrations in Hydrostatic Pumps Proc. of 5th International Conference on Fluid Power Transmission and Control (ICFP) Hangzhou, China 62 68
- Johansson, A. Palmberg, J.O. 2002 Quieter Hydraulic Systems - Design Considerations 5th JFPS International Symposium on Fluid Power Nara, Japan 799 804
- Johnston, D.N. et al 1993 Experimental and computational study of pumping dynamics and valve operation in a reciprocating pump ASME WAM New Orleans, USA
- Kojima, E. et al 2000 Experimental Determining and Theoretical Predicting of Source flow ripple Generated by Fluid Power Piston Pumps SAE International Off-Highway and Powerplant Congress and Exposition Milwaukee, USA SAE Special Publ. Topics in Hydraulics SP-1554 73 82
- Ngah, Z. Edge, K.A. 1991 The measurement of positive displacement pump and motor noise using sound intensity techniques SAE, International Off-Highway & Powerplant Congress Milwaukee, USA paper 911760
- Palmberg, J.O. 1989 Modelling of flow ripple from fluid power piston pumps 2nd Bath International Workshop University of Bath UK
- Pettersson, M. et al 1992 Reduction of flow ripple from fluid power piston machines by means of a precompression filter volume 10 Aachener Fluidtechnisches Kolloquium Aachen
- Weingarten, F. 2001 Noise reduction in Hydraulic Systems, what the pump can contribute Proc. of the seventh Scandinavian International Conference on Fluid Power, SCIFP'01 Linköping, Sweden 4 20
- Wieczorek, U. Ivantysynova, M. 2000 CASPAR - A Computer Aided Design Tool for Axial Piston Machines Bath Workshop on Power transmission and Motion Control PTMC Bath, UK 113 126
- Wieczorek, U. Ivantysynova, M. 2002 Computer aided optimization of bearing and sealing gaps in hydrostatic machines - the simulation tool CASPAR International Journal of Fluid Power 3 2002 1 7 20
- Wicke, V. et al 1998 Investigation of the effects of swash plate angle and suction timing on the noise generation potential of an axial piston pump ASME IMECE, FPST Division Anaheim, CA, USA
- Zeiger, G. Akers, A. 1985 Torque on Swash plate of an Axial Piston Pump Transaction of the ASME Journal of Dynamic systems, Measurement and Control 107 3 220 226