This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Influence of Boost Pressure and Injection Pressure on Combustion Process and Exhaust Emissions in a HD Diesel Engine
Technical Paper
2004-01-1842
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The scope of this study is the analysis of the influence of boost pressure and injection pressure on combustion process and pollutant emissions. The influence of these parameters is investigated for different engine speeds. Fuel mass was kept constant for all the tests in order to avoid its influence on the analysis. A single cylinder research diesel engine, equipped with a common rail injection system capable of operating up to a maximum pressure of 150 MPa was used. Special attention was paid to NOx, smoke (which are the most important pollutants for legislation) and brake specific fuel consumption.
Recommended Content
Authors
- Jesús Benajes - Universidad Politécnica de Valencia, CMT-Motores Térmicos
- Santiago Molina - Universidad Politécnica de Valencia, CMT-Motores Térmicos
- Jose M. García - Universidad Politécnica de Valencia, CMT-Motores Térmicos
- Ricardo Novella - Universidad Politécnica de Valencia, CMT-Motores Térmicos
Topic
Citation
Benajes, J., Molina, S., García, J., and Novella, R., "Influence of Boost Pressure and Injection Pressure on Combustion Process and Exhaust Emissions in a HD Diesel Engine," SAE Technical Paper 2004-01-1842, 2004, https://doi.org/10.4271/2004-01-1842.Also In
New Combustion Systems in Si and Diesel Engines, and Combustion and Emission Formation Processes in Diesel Engines
Number: SP-1890; Published: 2004-06-08
Number: SP-1890; Published: 2004-06-08
References
- Hiroyasu H. Arai M “Structures of Fuel Sprays in Diesel Engines” SAE PAPER 900475 1990
- Desantes J. M. Bermúdez V. Molina S. García J.M. “Influence of In-cylinder Gas Density and Injection Pressure on the Combustion Process and Emissions in a Heavy-Duty Diesel Engine” FISITA 2002 World Congress Helsinki 2002
- Gaillard Ph. Hedna M. “Performance Development of the First European Heavy Duty Diesel Engine Equiped with Full Electronic High Injection Pressure Common Rail System” SAE-Paper 2000-01-1821 2000
- Christian R. Knopf F. Jasmek A. Schindler W. “A New Method for the Filter Smoke Number Measurement with Improved Sensitivity (in German)” 16 22 1993
- Armas O. “Experimental Diagnostic of Combustion Process in Direct Injection Diesel Engines. Doctoral Thesis (in Spanish)” Universidad Politécnica de Valencia Spain 1998
- Lapuerta M. Armas O. Hernández J.J. “Diagnostic of D.I. Diesel Combustion from In-Cylinder Pressure Signal by Estimation of Mean Thermodynamic Properties of the Gas” Applied Thermal Engineering 5 513 519 1999
- Lapuerta M. Armas O. Bermúdez V. “Sensitivity of Diesel Engine Thermodynamic Cycle Calculation to Measurement Errors and Estimated Parameters” Applied Thermal Engineering 20 9 843 861 2000
- Ishida M. Ueki H. Matsumura N. Yamaguchi M. Luo G.F. “Diesel Combustion Analysis Based on Two Zone Model (Comparison Between Model Analysis and Experiment)” JSME Int. Journal, Series B 39 1 185 192 1996
- García J. Gil A Estellés V. “Theoretical and Experimental Model for the Burnt Products of Combustion Temperature Calculating on Direct Injection Diesel Engines (in Spanish)” XIV Congreso Nacional de Ingeniería Mecánica 2 2023 2028 Leganes Dic. 2000
- Heywood J.B. “Internal Combustion Engine Fundamentals” Ed McGraw-Hill International Editions Automotive Technology Series
- Kobory S. Kamimoto T. Aradi A. A. “A Study of Ignition Delay of Diesel Fuel Sprays” Int J. Engine Research 1 1 29 39 2000
- Rosseel E. Sierens R “The Physical an the Chemical Part of the Ignition Delay in Diesel Engines” SAE PAPER 961123 1996
- Ryan T. W. III Shahed S. M. “Injection Pressure and Intake Air Density Effects on Ignition and Combustion in a 4-Valve Diesel Engine” SAE PAPER 941919 1994
- Arrégle J. Pastor J. V. Ruiz S. “The influence of Injection Parameters on Diesel Spray Characteristics” SAE PAPER 1999-01-0200 1999
- Bae C. Yu J. Kang J. Kong J. Cuenca R. Lee K.O. “The Influence of Injector Parameters on Diesel Spray” Conference THIESEL 2002 55 66
- Schihl P. Atreya A. Bryzik W. “Development of a Shear Layer Ignition Model for Application to Direct-Injection Diesel Engines” Combustion and flame 121 453 470 2000 Elsevier Sciencie Inc.
- Uludogan A. Foster D.E. Reitz R. D. “Modelling the Effect of Engine Speed on the Combustion Process and Emissions in a DI Diesel Engine” SAE PAPER 962056 1996
- Mehta P. S. Tamma B “Effect of Swirl and Fuel Injection Characteristics on Premixed Phase of Diesel Combustion” SAE PAPER 980534 1998
- Timoney D. J. Smith W. J. “Influences of Fuel Injection and Air Motion Energy Sources on Fuel-Air Mixing Rates in a D.I. Diesel Combustion System” SAE PAPER 960035 1996
- Flynn P. F. Durret R. P. Hunter G. L. zur Loye A. O. Akinyemi O.C. Dec J. E. Westbrook C. K. “Diesel Combustion: An Integrated View Combining Laser Diagnostics, Chemical Kinetics, And Empirical Validation” SAE PAPER 1999-01-0509 1999
- Dec J. E. Coy E. B. “OH Radical Imaging in a DI Diesel Engine and the Structure of the Early Diffusion Flame” SAE PAPER 960831 1996
- Zhang L Takatsuki T. Yokota K. “An Observation and Analysis of the Combustion Under Supercharging on a DI Diesel Engine” SAE PAPER 940844 1994
- Easley W. L. Mellor A. M. Plee S. L. “Formation and Decomposition Models for DI Diesel Engines” SAE PAPER 2000-01-0582 2000
- Dec J.E. Canaan R.E “PLIF Imaging of NO Formation in a DI Diesel Engine” SAE PAPER 980147 1998
- Chikahisa T. Konno M. Murayama T. “Analysis of NO Formation Characteristics and Control Concepts in Diesel Engines from NO Reaction-Kinetic Considerations” SAE PAPER 950215 1995
- Li X. Wallace J. S. “A phenomenological Model for Soot Formation and Oxidation in Direct-Injection Diesel Engines” SAE PAPER 952428
- Tanin K. V. Wickman D. D. Montgomery D. T. Das S. Reitz R. D. “The Influence of Boost Pressure on Emissions and Fuel Consumption of a Heavy-Duty Single-Cylinder D.I. Diesel Engine” SAE PAPER 1999-01-0840
- Themel T. Jansons M. Campbell S. Rhee K. T. “Diesel Engine Response to High Fuel-Injection Pressures” SAE PAPER 982683 1998
- Desantes J.M. Pastor J.V. Molina S. “Analysis of the Combustion Process in a Heavy Duty D.I. Diesel Engine Through In-Cylinder Visualisation” 32-2 1999 Spring Technical Conference ASME 1999