This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Strain Hardening Behavior of Austempered Ductile Cast Iron (ADI)
Technical Paper
2004-01-0743
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
An investigation was carried out to examine the influence of austempering temperature on strain hardening behavior of austempered ductile cast iron (ADI). Cylindrical tensile specimens of nodular ductile cast iron were austempered by the conventional single-step austempering process at several temperatures. Strain hardening exponent (n values) of all these specimens were determined over the entire plastic deformation regions of the stress-strain curves. Optical microscopy and X-Ray diffraction analysis were performed to examine mechanisms of strain hardening behavior in ADI under tensile loading. Test results show that strain hardening behavior of ADI is influenced by austempering temperature and microstructural variables.
Recommended Content
Authors
Citation
Yang, J. and Putatunda, S., "Strain Hardening Behavior of Austempered Ductile Cast Iron (ADI)," SAE Technical Paper 2004-01-0743, 2004, https://doi.org/10.4271/2004-01-0743.Also In
References
- Dodd J. “High Strength, High Ductility Ductile Irons,” Modern Casting 68 5 60 66 1978
- Gundlach R.B. Janowak J.F. “Development of a Ductile Iron for Commercial Austempering” AFS Transaction 94 377 388 1983
- Harding R.A. Gilbert G.N.J. “Why the Properties of Ductile Irons should Interest Engineers,” British Foundryman 79 489 496 1986
- Schmidt I. Schuchert A. “Unlubricated Wear of Austempered Ductile Cast Iron,” Zeitschriftjbr Metalkunde 78 871 875 1987
- Tanaka, Y. Kage, H. Mater “Development and Application of Austempered Spheroidal Graphite Cast Iron” Trans. JIM June 1992 33 6 543 557 International Journal of Fatigue 15 5 September 1993 446
- Putatunda S.K. et al. “Influence of Microstructure on High Cycle Fatigue Behavior of Austempered Ductile Cast Iron,” Materials Characterization 30 221 234 1993
- Shanmugam P. Rao P.P. Udupa K.R. Venkataraman N. “Effect of Microstructure on the Fatigue Strength of an Austempered Ductile Iron,” J of Materials Science 29 4933 4940 1994
- Bartosiewicz L. Duraiswamy S. Sengupta A. Putatunda S.K. “Near Threshold Fatigue Crack Growth Behavior of Austempered Ductile Cast Iron,” Morris Fine Symposium TMS Detroit 135 138 1991
- Bartosiewicz L. Krause A.R. Sengupta A. Putatunda S.K. “Relationship between Fatigue Threshold and Fatigue Strength in Austempered Ductile Cast Iron,” International Symposium for Testing and Failure Analysis, ISTFA, ASM 16 323 336 1990
- Janowak J.F. Norton P.A. “A Guide to Mechanical Properties Possible by Austempering, 1.5% Ni, 0.3% Mo Iron,” AFS Transaction 88 123 135 1985
- Wilkinson G. Grupke C. “Design Consideration and Product Applications of Casting,” 2 nd International Conference on Ductile Iron Ann Arbor, Michigan 349 358 March 1986
- Panasiewicz J. Grupke C. Huth J. “Chrysler's Experience with Austempered Ductile Iron,” World Conference on Austempered Ductile Iron Bloomingdale, IL 176 194 March 1991
- Okazaki K. Asai H. Tokuyoshi M. Kusonoki H. Sakahara H. “Proceeding World Conference on Austempered Ductile Iron” Bloomingdale, IL 288 299 March 1991
- Kovacs B.V. “Austempered Ductile Iron, Facts and Fiction,” Modern Casting 36 38 41 1990
- Putatunda S. K. Singh I. “Fracture Toughness of Unalloyed Austempered Ductile Cast Iron,” Journal of Testing and Evaluation 23 5 325 332 September 1995
- Doong J. L. Chen C. “Fracture Toughness of Bainitic-Nodular Cast iron,” Fatigue Fracture of Engineering Material and Structure 12 155 165 1989
- Moore D. J. Rouns T.N. Rundamn K.B. “The Effect of Heat Treatment, Mechanical Deformation and Alloying Elements on Rate of Bainitic Formation in Austempered Ductile Cast Iron,” J of Heat Treating 4 1 7 24 June 1985
- Simmons J. W. “Strain Hardening and Plastic Flow properties of Nitrogen-Alloyed Fe-17Cr-(8-10)Mn-5Ni Austenitic Stainless Steel” Acta mater. 45 6 2467 2475 1997
- “Standard Test Method for Tensile Testing of Metallic Materials” Annual Book of ASTM Standards” ASTM 3.01 542 566 1993
- Rao P.P. Putatunda S. K. “Influence of Microstructure on Fracture Toughness of Austempered Ductlie Cast Iron,” Metallurgical and Materials Transaction 28A 7 1457 1470 July 1997
- “Test Method for Tensile Strain-Hardening Exponent (n-values) of Mechanic Sheet Materials” Annual Book of ASTM Standards 03.01 667 1992
- Rundman B. Klug R.C. “AFS Transaction” 90 499 508 1982
- Cullity B. D. “Elements of X-ray Diffraction” Addison - Wesley Reading, MA 411 412 1974
- Roberts C. S. “Transaction of AIME” 197 203 204 1953
- Yuquan Song Jintao Hai Zhiping Guan “Mechanical Analysis of the Strain Hardening Exponent under Tensile Deformation” Science in China (Series E) 44 6 Dec. 2001 647 653
- Sarosiek A. M. Owen W.S. “The Work Hardening of Dual-Phase Steels at Small Plastic Strains” Materials Science and Engineering 66 13 34 1984
- Huang M. Luo J. He B. “Proceeding of the 4 th International Conference on the Mechanical Behavior of Materials” 2 Pergamon Oxford 673 1984
- Fan Zhang Mingzhi Huang DeKe Shi “The Relationship between the Strain-hardening Exponent n and the Microstructure of Metals” Materials Science and Engineering A 122 211 213 1989
- Franetovic Vjekoslav Shea Michael M. Ryntz Edward F. “Transmission Electron Microscopy Study of Austempered Nodular Iron: Influence of Silicon Content, Austenitizing Time and Austempering Temperature” 231 245 1987
- Garin J. L. Mannheim R. L. “Strain-induced martensite in ADI alloys” 21 May 2003
- Zhou Wu-Sheng Zhou Qing-De “Lubricated Sliding and Rolling Wear of Austempered Ductile Cast Iron” Wear 162-164 696 702 1993
- Mayr P. Vetters H. Walla J. “Proceeding 2 nd International Conference on Austempered Ductile Cast Iron” Ann Arbor, Geared Research Institute Naperville, IL 171 178 1986
- Vuorinen J. J. Strain Hardening Mechanisms and Characteristics of Austempered Ductile Iron” AFS Transactions 100 577 587 1986