This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Diesel Engine Exhaust Thermal and Vibration Mapping
Technical Paper
2004-01-0590
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The characterization of the thermal and vibration environment of the exhaust systems of three modern day diesel engines, with displacements ranging from 1.9 liter to 12.7 liter, was carried out to support the development of exhaust after treatment components. Tri-axial accelerometer and in pipe thermocouple measurements were recorded at several locations along the exhaust systems during vehicle acceleration and steady driving conditions up to 70 mph. The vehicles were loaded to various gross weight configurations to provide a wide range of engine load conditions. Narrow band and octave band vibration power spectral densities are presented and conclusions are drawn as to the spectral content of the exhaust vibration environment and its distribution along the exhaust system. Temperature time histories during vehicle acceleration runs are likewise presented to indicate expected peak exhaust temperatures. An optimization procedure is presented to generate a single axis test specification that meets or exceeds the measured vibration environment in each of the three response axes simultaneously.
Recommended Content
Authors
Topic
Citation
Unruh, J., Till, P., Locker, R., and Sawyer, C., "Diesel Engine Exhaust Thermal and Vibration Mapping," SAE Technical Paper 2004-01-0590, 2004, https://doi.org/10.4271/2004-01-0590.Also In
References
- Stroom, P.D. Merry, R.P. Gulati, S.T. “Systems Approach to Packaging Design for Automotive Catalytic Converters,” SAE Paper No. 900500 February 1990
- Locker, R.J. Sawyer, C.B. “Low Temperature Catalytic Converter Durability” SAE Paper No. 2000-01-0220 March 6-9 2000
- Locker, R.J. Sawyer, C.B. “Quantification of Ceramic Preconverter Hot Vibration Durability,” SAE Paper No. 960563 February 1996
- Unruh, J.F. Fox, D.J. Locker, R.J. Sawyer, C.B. “Catalytic Converter Mat Material Durability Measurement Under Controlled Thermal and Vibration Environments,” SAE Paper 2000-01-0221 , World Congress Detroit, Michigan March 6-9 2000